Our rigorous quality control processes ensure that every plastic injection moulding part meets the highest standards of accuracy and reliability. We conduct thorough inspections at every stage of production to maintain consistency and quality.

Our expertise extends to heavy vehicles, providing robust and reliable plastic injection moulding parts designed to withstand demanding conditions, enhancing performance and safety.

It is also environmentally friendly due to not containing non-toxic recyclable plastics, reducing the environmental footprint. Moreover, the disadvantages are it can be quite costly to get this material. Even though the material can go to high temperature, it would mean that it can lose its rubbery property.

POM is plastic injection moulding materials which is also identified as acetal, this is a hard tough material. Acetal can be used to produce automotive parts . Other usage of acetal is zippers, fan wheels, door handles or lock systems and including insulin pens. The advantages are it has a high gloss surface and is resistant to organic solvent and chemicals except for phenols.

We provide innovative solutions for the lighting industry, producing plastic injection moulding components that improve the efficiency and design of luminaires.

Our sophisticated plastic injection moulding capabilities allow us to produce parts with intricate details and complex geometries, including components with tight tolerances, complex shapes, or fine details.

Nylon, also known as polymer fabric is one of the most versatile injection moulding materials due to its different nature. It is used for various apparel along with car tires, fishnet, and electrical applications like insulators.

Finally, one of the last injection moulding materials we are looking at is Polypropylene, otherwise known as polypropene. Polypropene is a thermoplastic polymer that is used in many various applications and it also holds largest revenue share of 34.2% in 2020 . It’s mostly common in the food storage and packing industry because of the fact that it does not mix chemicals with food products. Other benefits of this material are its high impact strength and good moisture resistance.

Our plastic injection moulding service offer a wide selection of materials, from general-purpose plastics to high-performance engineering polymers, enabling us to meet the specific needs of different industries and applications.

Moreover, the disadvantage of low density is that it can be flammable and has poor temperature capability making it dangerous near a fire. In addition to this, it can also be difficult to bond and has poor weathering resistance.

We serve various industrial applications with durable and precise plastic injection moulding parts for machinery, equipment, and other needs, ensuring efficiency and reliablity.

Choose us for unmatched quality and innovation in injection moulding services. Let us be your partner in success, delivering reliable and high-performance parts that meet your exact needs.

Explore our portfolio of plastic injection moulding industrial windows, available in various versions and designs for different applications and thermal zones.

ABS stands for Acrylonitrile butadiene styrene. This is a typical thermoplastic type of injection moulding materials that’s in pipes, automotive body parts as well as keyboards.

TPU has many different properties such as elasticity, transparency and resistances. Its traits are its soft and hard segments. The main use for this type of plastic is cases for mobile phones as well as keyboard protectors and footwear.

We offer a wide selection of materials to suit various applications, from general-purpose plastics to high-performance engineering polymers. This versatility enables us to meet the specific needs of different industries and applications.

Our plastic injection moulding services for the furniture industry include the production of ergonomic and stylish components. We manufacture high-quality parts that contribute to the functionality and aesthetic appeal of modern furniture.

We manufacture high-quality plastic injection moulding components for light vehicles, including interior trim parts, and exterior body panels, ensuring durability and aesthetic appeal.

High-density polyethylene is injection moulding materials which is a resilient, solid plastic thermoplastic mainly in plastic bottles, shampoo bottles, toys, recycling bins as well as flower pots. The main advantage of using HDPE is that it’s affordable whilst also having stiff material with high strength.

Polycarbonate is a strong hard injection moulding materials used in engineering and tends to be transparent. The material PC is in compact discs, safety hamlets, bulletproof glass and other electrical and telecommunication hardware.

In comparison to HDPE, Low-density polyethylene is a much softer and more flexible material. Low-density polyethylene is used as injection moulding materials to create bottles, plastic bags and plastic wraps as well as playground slides. The benefits of using this material are its moisture and chemical resistance. Plus, it has low cost and is food-grade,so it’s safe to use for food content.

With extensive experience in plastic injection moulding, our team of experts is equipped to handle projects of all complexities, delivering superior results every time. We stay up-to-date with the latest industry trends and technologies to provide the best possible solutions.

Ready to elevate your project with our top-tier plastic injection moulding services?Contact us today to discuss your requirements and receive a personalised quote. Let us help you bring your designs to life with precision and efficiency.

The advantage is that polyurethane has outstanding toughness and flexibility and is resistant to impacts such as tears whilst also being resistant to grease and oil. This makes it good dimensional stability due to its minimal responses to tears over time.However, the disadvantages is that, it is not cost-effective in comparison to other alternatives. It aslo has short shelf life.

We invest in the latest plastic injection moulding technology and equipment, ensuring high-quality production and efficiency. Our advanced machinery allows us to produce parts with high precision and minimal waste.

Whereas, the disadvantages are that HDPE is highly flammable and it’s not biodegradable making it hard to get rid of. In addition to this, high-density polyethylene can not be composed and has poor weathering.

In the medical sector, we produce critical components such as syringes, surgical instruments, and diagnostic equipment, adhering to stringent regulatory standards for safety and reliability.

Whereas, the disadvantages are that it can get degraded by UV, losing 70% of its strength by the sun. In addition to this, it can be flammable due to the chemical containing.

Thermoplastic rubber, in other words elastomer, is another injection moulding material. It contains a mix of plastic parts and rubber. Used for automotive parts such as wires and cable insulation and other applications as a home appliance. The advantages are the ability to stretch and come back to its normal shape.

We prioritise understanding of your needs and deliver customised plastic injection moulding solutions that exceed your expectations. Our dedicated customer service team is always available to assist you with any inquiries or concerns.

However, one impact is that it can scratched easily which makes it very delicate when used. Furthermore, it can be very damaging to the environment since it’s made out of oil and in production creates hot plastic fumes.

Our streamlined plastic injection moulding process allows for rapid production of large volumes of parts, making it ideal for mass production scenarios. The high level of automation minimises human intervention, reducing errors and increasing efficiency.

With Nylon, it has many advantages as an injection moulding material. One is that it has good abrasion resistance making it last longing and elastic in nature. On the other hand, the disadvantages are that the material tends to easily melt. Which makes it hard to make use of the material in liquid state. It also absorbs water from the moisture in the air or directly.

Plastic injection moulding is a versatile manufacturing process that produces parts by injecting molten material into a mould. This technique is ideal for mass production, enabling the creation of thousands, or even millions, of identical parts. While typically applied to thermoplastic and thermosetting polymers, plastic injection moulding can also accommodate metals, glasses, elastomers, and more, offering a flexible solution for various manufacturing requirements.

The advantages is that it is nearly unbearable as its bullet resistance and is high quality. It also protects against discolouring however, after a long time of UV light exposure it can turn yellow. Additionally, it can be sensitive to scratching.

At KB Components, we specialise in delivering high-quality injection moulding services tailored to meet the needs of various industries. Our state-of-the-art facilities, cutting-edge technology, and experienced professionals are dedicated to providing precise, efficient, and cost-effective plastic injection moulding solutions. Whether you require small, intricate components or large, complex assemblies, our plastic injection moulding capabilities ensure top-notch performance and reliability.

Among these listed injection moulding materials ,Acrylic comes in a lightweight sheet; it is common as an alternative to glass. There is a large range of products that PMMA uses, for example, windows, lenses for glasses and rear lights for vehicles. The advantages of acrylic is that it can stand against weathering and has high gloss and good abrasion resistance. Having said that, the disadvantages are, it is limited to heat resistance and can crack under a load of pressure.

Along with its good properties ,ABS has many benefits, for example, having high impact resistance makes it hard to break due to the material being sturdy whilst being lightweight. It also can withstand heat and reach high temperatures.

We offer plastic injection moulded parts ready for chrome plating, delivering aesthetically pleasing and corrosion-resistant components. Our services are ideal for automotive, decorative, and industrial applications.

Injection moulding is a common method of manufacturing thermoplastic. Material selection is difficult while there are lots of common plastics we can use as Injection molding plastic. Thermoplastic is a material that is usually a plastic polymer. This means once it’s melted, it can be reused by remelting, reshaping, and refreezing.