Resin drying is a crucial, but often-misunderstood area. This collection includes details on why and what you need to dry, how to specify a dryer, and best practices.

Mike Sepe has authored more than 25 ANTEC papers and more than 250 articles illustrating the importance of this interdisciplanary approach. In this collection, we present some of his best work during the years he has been contributing for Plastics Technology Magazine.

After successfully introducing a combined conference for moldmakers and injection molders in 2022, Plastics Technology and MoldMaking Technology are once again joining forces for a tooling/molding two-for-one.

Join Wittmann for an engaging webinar on the transformative impact of manufacturing execution systems (MES) in the plastic injection molding industry. Discover how MES enhances production efficiency, quality control and real-time monitoring while also reducing downtime. It will explore the integration of MES with existing systems, emphasizing compliance and traceability for automotive and medical sectors. Learn about the latest advancements in IoT and AI technologies and how they drive innovation and continuous improvement in MES. Agenda: Overview of MES benefits What is MES? Definition, role and brief history Historical perspective and evolution Longevity and analytics Connectivity: importance, standards and integration Advantages of MES: efficiency, real-time data, traceability and cost savings Emerging technologies: IoT and AI in MES

An Engel spokesperson told Plastics Technology that ADS and Infiltrator wanted to keep most of the key details around the machine close to the vest, but Engel says going forward it will be manufacturing even larger machines, including the possibility of presses with clamp forces exceeding 12,000 tons and shot weights of a few hundred kilograms. For these machines, maximum platen size would 13 by 10 ft, with the ability to run molds weighing up to 444,000 lb and offer material throughput of 4400 lb/hr.

The Plastics Industry Association (PLASTICS) has released final figures for NPE2024: The Plastics Show (May 6-10; Orlando) that officially make it the largest ever NPE in several key metrics.

Mold maintenance is critical, and with this collection of content we’ve bundled some of the very best advice we’ve published on repairing, maintaining, evaluating and even hanging molds on injection molding machines.

Two mammoth 8000-ton presses built at its St. Valentin plant in Austria have been delivered to Infiltrator Water Technologies in Winchester, Ky.

In this collection, which is part one of a series representing some of John’s finest work, we present you with five articles that we think you will refer to time and again as you look to solve problems, cut cycle times and improve the quality of the parts you mold.

Plastics Technology covers technical and business Information for Plastics Processors in Injection Molding, Extrusion, Blow Molding, Plastic Additives, Compounding, Plastic Materials, and Resin Pricing. About Us

An improved line of large two-platen injection presses offers new sizes plus greater speed, educed maintenance, more operator-friendly design, and added flexibility for a range of molding requirements.

In this collection of content, we provide expert advice on welding from some of the leading authorities in the field, with tips on such matters as controls, as well as insights on how to solve common problems in welding.

Second quarter started with price hikes in PE and the four volume engineering resins, but relatively stable pricing was largely expected by the quarter’s end.

Special transportation was required for many parts of this huge machine. Pictured is the arrival of the 257,941 lb stationary platen at the Infiltrator facility in Winchester, Ky. Photo Credit: Engel

offering specialist micro-moulding services. The highly specialised manufacturing process produces extremely small, high precision, thermoplastic parts and components with micron tolerances is a new niche within the injection moulding industry.

What are the basic building blocks of plastics and how do they affect the processing of that material and its potential applications in the real world? Meet the repeat unit.

The enormous size of these machines required new manufacturing facilities to house them. Infiltrator completed a 59,000-ft2 building expansion over the same time as the parts were delivered. Over 2 months, the machine was assembled while the building and all the necessary auxiliary equipment and utilities were installed, including a 150-ton overhead crane intended to move molds in and out of the machine but used to help assemble the new press in the interim.

Despite price increase nominations going into second quarter, it appeared there was potential for generally flat pricing with the exception of a major downward correction for PP.

Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.

This CW Tech Days virtual event will explore the technologies, materials and strategies used by composites manufacturers working in the evolving space market. Presentations from industry experts will emphasize the use of composite materials in applications requiring the weight savings, structural benefits and ability to withstand extreme temperatures that only composites can provide.

In a time where sustainability is no longer just a buzzword, the food and beverage packaging industry is required to be at the forefront of this innovation. By adopting circular packaging processes and solutions, producers can meet regulatory requirements while also satisfying consumer demand and enhancing brand reputation. Join Husky to learn more about the broader implications of the circular economy — as well as how leading brands are leveraging this opportunity to reduce costs, increase design flexibility and boost product differentiation. Agenda: The cost and operational benefits of embracing circularity Key materials in circular packaging — including rPET and emerging bioplastics How to design a circular food and beverage package Strategies for selecting sustainable closures to future-proof packaging solutions Optimization and streamlining of production processes for enhanced efficiency How Husky Technologies can enable your sustainable success

Learn about sustainable scrap reprocessing—this resource offers a deep dive into everything from granulator types and options, to service tips, videos and technical articles.

The Engel duo 130000/130000H/8200 combi machines each feature two 85,000 cm³ (approx. 2900 oz.) injection units capable of a combined total shot weight of 270 lbs (122 kg). In terms of footprint, the machines measure 96 feet (29.3 meters) long and 37 feet (6.4 meters) wide. Big no doubt, but in relation to their shot size and clamp force, Engel points out that these behemoths actually have a relatively small footprint made possible by the duo’s two-platen design.

technotrans says climate protection, energy efficiency and customization will be key discussion topics at PTXPO as it displays its protemp flow 6 ultrasonic eco and the teco cs 90t 9.1 TCUs.

Multiple speakers at Molding 2023 will address the ways simulation can impact material substitution decisions, process profitability and simplification of mold design.

PlastikCity may process your personal information when you submit an enquiry through our website. We will use this information to provide the services requested and, if applicable, this will be shared with your selected third parties. For more information explaining how we use your information please see our privacy policy.

An overview on the use of chemical foaming agents (CFAs) to successfully foam single and multilayered rotational molding parts, this webinar will illustrate the multiple benefits rotational molders can achieve, including reducing resin consumption, decreasing part weight, enhancing wall thickness and improving structural rigidity. Agenda: Charging the mold Dosing ratios Venting Optimal decomposition temperatures, cycle times and drop times for drop box applications Cooling considerations

Discover how artifical intelligence is revolutionizing plastics processing. Hear from industry experts on the future impact of AI on your operations and envision a fully interconnected plant.

In this collection of articles, two of the industry’s foremost authorities on screw design — Jim Frankand and Mark Spalding — offer their sage advice on screw design...what works, what doesn’t, and what to look for when things start going wrong.

Ultradent's entry of its Umbrella cheek retractor took home the awards for Technical Sophistication and Achievement in Economics and Efficiency at PTXPO.

August 29-30 in Minneapolis all things injection molding and moldmaking will be happening at the Hyatt Regency — check out who’s speaking on what topics today.

While the major correction in PP prices was finally underway, generally stable pricing was anticipated for the other four commodity resins.

Join Engel in exploring the future of battery molding technology. Discover advancements in thermoplastic composites for battery housings, innovative automation solutions and the latest in large-tonnage equipment designed for e-mobility — all with a focus on cost-efficient solutions. Agenda: Learn about cutting-edge thermoplastic composites for durable, sustainable and cost-efficient battery housings Explore advanced automation concepts for efficient and scalable production See the latest large-tonnage equipment and technology innovations for e-mobility solutions

Take a deep dive into all of the various aspects of part quoting to ensure you’ve got all the bases—as in costs—covered before preparing your customer’s quote for services.

Mixed in among thought leaders from leading suppliers to injection molders and mold makers at the 2023 Molding and MoldMaking conferences will be molders and toolmakers themselves.

AIM Processing has parlayed small part molding expertise and aggressive automation, even for short run production, into a highly successful custom molding business.

This Knowledge Center provides an overview of the considerations needed to understand the purchase, operation, and maintenance of a process cooling system.

While prices moved up for three of the five commodity resins, there was potential for a flat trajectory for the rest of the third quarter.

Join this webinar to explore the transformative benefits of retrofitting your existing injection molding machines (IMMs). Engel will guide you through upgrading your equipment to enhance monitoring, control and adaptability — all while integrating digital technologies. You'll learn about the latest trends in IMM retrofitting (including Euromap interfaces and plasticizing retrofits) and discover how to future-proof your machines for a competitive edge. With insights from industry experts, it'll walk you through the decision-making process, ensuring you make informed choices that drive your business forward. Agenda: Maximize the value of your current IMMs through strategic retrofitting Learn how to integrate digital technologies to enhance monitoring and control Explore the benefits of Euromap interfaces and plasticizing retrofits Understand how retrofitting can help meet new product demands and improve adaptability Discover how Engel can support your retrofitting needs, from free consultations to execution

Sustainability continues to dominate new additives technology, but upping performance is also evident. Most of the new additives have been targeted to commodity resins and particularly polyolefins.

Across all process types, sustainability was a big theme at NPE2024. But there was plenty to see in automation and artificial intelligence as well.

Plastics Technology’s Tech Days is back! Every Tuesday in October, a series of five online presentations will be given by industry supplier around the following topics:  Injection Molding — New Technologies, Efficiencies Film Extrusion — New Technologies, Efficiencies Upstream/Downstream Operations Injection Molding — Sustainability Extrusion — Compounding Coming out of NPE2024, PT identified a variety of topics, technologies and trends that are driving and shaping the evolution of plastic products manufacturing — from recycling/recyclability and energy optimization to AI-based process control and automation implementation. PT Tech Days is designed to provide a robust, curated, accessible platform through which plastics professionals can explore these trends, have direct access to subject-matter experts and develop strategies for applying solutions in their operations.

ADS, which places a high level of corporate emphasis on sustainability, said it has made significant investments in new equipment in recent years to help it more efficiently create its products, which are used to move water and now include high levels of recycled plastic. For Engel, which was recently been granted an EcoVadis gold rating, sustainability is also a top priority.

Please note this facility is only for companies interested in buying products or services from this PlastikCity Partner. DO NOT use this facility if you’re looking to sell products. Your email address and company will be blocked from future use of PlastikCity if you ignore this notice.

When determining the best ejection option for a tool, molders must consider the ejector’s surface area, location and style.

Exhibitors and presenters at the plastics show emphasized 3D printing as a complement and aid to more traditional production processes.

There are five specific areas that designers and manufacturers need to consider to realize the potential of these unique materials.

Gifted with extraordinary technical know how and an authoritative yet plain English writing style, in this collection of articles Fattori offers his insights on a variety of molding-related topics that are bound to make your days on the production floor go a little bit better.

Creating something as thin as 0.1mm is pushing the boundaries in micro moulding to achieve something so small and to mould it efficiently and precisely time and time again.

In a release, Jim Moran, business development manager at Engel North America, laid out the logistical challenges of transporting the machines from Austria to Kentucky. Actually, since each press was fully assembled and tested prior to shipping and then disassembled to be delivered to the U.S., the company was technically shipping components with 29 truckloads of parts eventually arriving in Kentucky from Austria, including the platens which were transported to and from St. Valentin via barge on the Danube River.

The supplier will respond with either a confirmation of the meeting or suggest an alternative time slot if it isn’t practical.

Plastics Technology Top Shops Benchmarking Survey provided both unanimous responses and divided results, but pervasive throughout is the sense of an industry still grappling with the aftermath of 2020’s global pandemic.

More than four years on, there are aspects of the COVID-19 pandemic that linger in their impacts to the plastics market and are made visible in our annual survey.

When, how, what and why to automate — leading robotics suppliers and forward-thinking moldmakers will share their insights on automating manufacturing at collocated event.

Micro-Moulding as thin as 0.1mmWith over 40 years of experience of design and development behind us, we’re constantly aware of new market demands. That’s why Biplas are developing injection mould tooling to mould wall sections as thin as 0.1mm, even smaller than a grain of sand.

Infiltrator Water Technologies will use the machine’s 270-lb combined shot weight to injection mold water management products. Photo Credit: Engel

Join KraussMaffei for an insightful webinar designed for industry professionals, engineers and anyone interested in the manufacturing processes of PVC pipes. This session will provide a comprehensive understanding of the technology behind the production of high-quality PVC pipes: from raw material preparation to final product testing. Agenda: Introduction to PVC extrusion: overview of the basic principles of PVC pipe extrusion — including the process of melting and shaping PVC resin into pipe forms Equipment and machinery: detailed explanation of the key equipment involved — such as extruders, dies and cooling systems — and their roles in the extrusion process Process parameters: insight into the critical process parameters like temperature, pressure and cooling rates that influence the quality and consistency of the final PVC pipes Energy efficiency: examination of ways to save material and energy use when extruding PVC pipe products

Currier Plastics had a major stake in small hotel amenity bottles until state legislators banned them. Here’s how Currier adapted to that challenge.

Introduced by Zeiger and Spark Industries at the PTXPO, the nozzle is designed for maximum heat transfer and uniformity with a continuous taper for self cleaning.

Our flexible  cleanroom moulding protocol allows automatic moulded components to be manufactured in a Class 5  environment. Our facilities mean we have the capability to create medical devices in a sterile environment.

Austrian injection molding machine and automation supplier Engel (Schwertberg) has delivered the two largest-ever injection molding it has built to the U.S., shipping a pair of 8000-ton duo combi machines to Advanced Drainage Systems‘ (ADS) subsidiary Infiltrator Water Technologies (IWT) in Winchester, Ky.

This month’s resin pricing report includes PT’s quarterly check-in on select engineering resins, including nylon 6 and 66.

Engel notes that dozens of individuals worked thousands of hours with a perfect safety record to complete the project. Engel received the purchase order in November 2020, with the handover of the first machine completed in February 2022. In Februray 2023, the second machine, a replica of the first, was delivered.

Formnext Chicago is an industrial additive manufacturing expo taking place April 8-10, 2025 at McCormick Place in Chicago, Illinois. Formnext Chicago is the second in a series of Formnext events in the U.S. being produced by Mesago Messe Frankfurt, AMT – The Association For Manufacturing Technology, and Gardner Business Media (our publisher).

In this three-part collection, veteran molder and moldmaker Jim Fattori brings to bear his 40+ years of on-the-job experience and provides molders his “from the trenches” perspective on on the why, where and how of venting injection molds. Take the trial-and-error out of the molding venting process.

Today, more than ever, granulation is an important step in the total production process. Our expert explains a few of the many common traps to avoid when thinking about granulators

In many cases, decreasing the discharge temperature will improve product quality and perhaps even boost rate. Here are ways to do it.

This 1-day technical conference and exhibition showcases innovative developments in materials, processing and equipment for the additive manufacturing industry. This conference is specifically designed to inform, update and educate plastic processors about implementing new additive manufacturing technologies. Hear technical presentations on the newest advances in additive manufacturing related to: design, materials development, processing equipment and enabling technologies, new applications and more. See exhibits from engineering plastic suppliers, compounders, molders, design and engineering firms and machinery suppliers. Experts will show you how to apply the latest technologies to your next project or program. The conference includes a full day of technical presentations, plenary and keynote presentations on business trends; breakfast, lunch and breaks; exhibits of advanced technologies and an evening networking reception.   Note: Additive Manufacturing Media executive editor Stephanie Hendrixson will moderate the Supporting AM Adoption in Northeast Ohio panel at 11:20 a.m.