Tough-Cast 65D is a two component polyurethane casting resin that is virtually indestructible. It exhibits excellent impact resistance, abrasion resistance, strength and chemical resistance. Tough-Cast 65D has the look and feel of thermoplastics such as abs while maintaining a high heat deflection. It is designed for making durable prototypes, reproductions, end use production parts, rollers, etc.. It contains zero solvents and can be hand mixed or used with automated dispensing equipment. Tough-Cast 65D works excellent in rtv silicone molds.

Copyright © Packson Mold Co.,Ltd. All Rights Reserved.      Sitemap  |   Privacy Policy

Due to the morons at FedEx giving my order the Grand Tour of the lower 48 states, I haven't had the opportunity to try this product personally. I know it will do the job perfectly once I have it.

Generally, the main cost driver of injection molding is mold cost. The injection moulding mould cost of designing and manufacturing the mold depends on the required production volume, the complexity of the part design, the mold material, and the process used to make the mold.

Bought the product as a last gasp. Desperation move for a very difficult application. Used it for the first time and I’m beyond happy with the results. Mixing was easy and so far the parts work perfectly. Long-term durability will be my only remaining question.

Tough-Cast 65D Black is a two part casting resin that is virtually indestructible and is designed to make durable prototypes and reproductions.

According to the requirements of the final part, a variety of plastics can be used for injection molding, including ABS, PS, PE, PC, PP or TPU. The procurement cost of mould materials varies according to the material selected. The cost of thermoplastic pellets is approximately US$1 to US$5 per kilogram. The material cost is defined by the design of the model, the material selected, and the amount of material used to perform the injection molding.

Great product, easily casted, gels in 2-3 min. Demolds in 30 min or less. This product renewed my wearing and depressing prototyping while using inferior products. This material enabled me to creat a very strict tolerance part, with bubble free glass finishes. Wish I would have discovered SRC products sooner

I have made many ball mounts for my GoPros and bushings for my cars and motorcycles. I have yet to figure out how to eliminate all the bubbles but still more than good enough for my applications.

The cost of simple low-volume 3D printing molds may be as low as $100, while the cost of designing and manufacturing complex molds for mass production may reach the $100,000 mark. Although the fixed start-up cost is considerable, the variable cost of the injection molding process is lower due to the cheap thermoplastic materials, short cycle times, and gradual reduction in labour demand due to automation and economies of scale.

Injection molding is one of the main processes for manufacturing plastics. It is widely used for mass production of identical parts with strict tolerances. This is a cost-effective and highly repeatable technology that can produce high-quality parts for mass production.

Great resin with excellent strength! Semi flexible in thinner cross regions but ridged in thicker pours. My go to resin! Customer service from specialty resin is top notch aswell! Highly reccomend the tough cast 65d black

This means that the variable cost of production is lower, the design for manufacturing injection molding and process becomes more efficient, and as the cost is distributed among hundreds or thousands of parts, the cost of each part decreases as the output increases.

Since the cost is dispersed among hundreds of parts, injection moulding is an ideal process for mass production of plastic parts economically.

This is a fast and intensive process that requires molten material to be injected into the mold at high temperatures and high pressure. The molten material depends on the scope of the manufacturing project. The most popular materials are various thermoplastics, but metals and ceramics can also be injection molded. The mold consists of a cavity that can hold the injected molten material and is designed to closely reflect the final characteristics of the part.