When even the maximum recommended wall thickness is not enough to meet the functional requirements of a part, ribs can be used to improve the strength and stiffness of a part.

The uniform wall thickness limitations also applies to edges and corners; the transition must be as smooth as possible to ensure good material flow through the mould.

Undercuts refer to part features that cannot be manufactured with a simple 2-part mould because material is in the way while the mould opens or during the ejection of the part. Avoiding undercuts all together is usually the best options as they add cost, complexity and maintenance requirements to the mould.

Injection moulding is a manufacturing process that melts, injects and sets plastic into a metal mould. The plastics used by injection molding processes are relatively cheap and can be used to achieve a wide variety of properties, so injection molding is popular for creating many packaging and consumer products, like LEGO!

When 2 flows meet, small hair-like discolorations may develop. These knit lines affect the parts aesthetics, but also they generally decrease the strength of the part.

Bosses consist of cylindrical projections with holes designed to receive screws and other fasteners and assembly hardware, they are very common in injection moulded parts as they are used as points of attachment or assembly.

As the plastic shrinks, it applies pressure on the mold. During ejection, the walls of the part will slide and scrape against the mold, which can result to drag marks.

When adding text choose embossed text over engraved text as it is more economical when creating the mould. Raising the text 0.5mm above the part surface will ensure the letters are easy to read.

If you are looking for a plastic molder near you, no sweat. ICOMold can service customers just about anywhere. Learn more about ICOMold.

If sections of different thicknesses are required, make the transition as smooth as possible using a chamfer or fillet. This will allow the material to flow more evenly through the mould.

Commercially, injection moulding offers a flexible, consistent and cost-effective process of manufacturing that allows for rapid production of parts in a range of materials. Once the process has been set up and tested, machines can produce thousands of items per hour and once the mould is created (which is the most expensive element) the cost of production per component is relatively low.

Overmolding is the process of taking a part and then using plastic injection molding to add additional layers over the current part.

Injection moulding typically produces parts with tolerances of +/- 0.25mm. Tighter tolerances can be possible in certain situations but increase the cost of manufacture dramatically.

Plastic mold manufacturing is the process of creating molds to mass product plastic parts. Learn more about plastic mold manufacturing.

Finding the right company for your injection molding project does require careful research and consideration. Read about ICOMold, one of the leading plastic injection molding companies, and their process for delivering high-quality parts, fast at low prices.

Draft angle is a taper applied to the vertical walls of the component to be moulded to assist with releasing the part. Walls without draft angle may become stuck in the mould and will have drag marks on their surface.

Here at UNSW we have 2 CR Clarke desktop injection moulders great for learning, testing and experimenting with the process!

When the interior of a part solidifies before its surface, a small recess in an otherwise flat surface may appear, called a sink mark.

When certain sections cool (and as a result shrink) faster than others, then the part can permanently bend due to internal stresses.

To avoid warping and sink marks on the part as the melted material cools down it is important to have uniform wall thicknesses and avoid thick sections if possible.

If you’re looking for an injection molding company who can support your business needs, you should turn to ICOMold. ICOMold offers low prices on plastic injection molds and plastic parts. You can also get an instant injection mold quote and CNC manufacturing parts quotes through our online quoting and project management system. We offer fast and dependable injection mold services and trouble-free injection mold modifications. Our services include low and high-volume production molds and parts— rapid prototype injection molds, production molds, and export molds. Get a plastic injection molding quote today.

When designing ribs, use a thickness equal to 0.5 x the main thickness, define a height smaller than 3 x the rib thickness and use a base fillet with a radius greater than 1/4 x the rib thickness. Also make sure to add draft angle!

The outer diameter of the boss should be 2x the nominal diameter of the screw or insert and its inner diameter equal to the diameter of the core of the screw.

ICOMold’s fast-turn, low-cost, high-value injection molding enhanced by joining Fathom’s manufacturing platform. Learn More

Redesigning the part to remove undercuts or moving the part line can be possible solutions to make the design more feasible.

Trapped air in the mold can inhibit the flow of the material during injection, resulting in an incomplete part. Good design can improve the flowability of the melted plastic.

Injection molding is the process of producing various parts by injecting heated material into a mold. Injection molding can be done with many different materials such as metals, glasses, elastomers, confections, and most commonly thermoplastic and thermosetting polymers. ICOMold specializes in custom plastic injection molding, CNC machining of plastic and metal, and urethane casting. Get a CNC quote or a plastic injection molding quote today!

Thick sections can lead to various issues such as warping and sinking. Reducing the maximum thickness of the design can be achieved by making the thicker sections hollow is essential. To improve the strength of these sections, ribs can be used to create structures that are of equal strength and stiffness but with reduced wall thickness and weight.

It’s true that there are several plastic mold makers to choose from. Learn why ICOMold is the right plastic mold maker for you and your project.

For interior edges, use a radius of at least 0.5 x the wall thickness. For exterior edges add a radius equal to the interior radius plus the wall thickness to ensure constant thickness everywhere. This can also help to stop stress concentrating in the sharp corners which can cause weaker parts.