If the down payment option is selected an email will be sent to you when the machine is completed. Then select the final payment option and the machine will be shipped to you. You will receive two invoices/receipts for the down/final payment option. Shipping charges are added in the final payment option.

This machine has two separate melting pots and a nozzle that connects both which allows you to work with two colors, singly or simultaneously.  Injecting laminate two color baits is possible.For use with vinyl plastisol only. (Standard soft plastic bait material)

The plastic can be heated directly inside the machine. Colorants and additives can also be added to the plastic in the machine.

To save time, preheat the next batch of plastic in a presto pot or microwave and pour in the melting pots. Color change time will be less than 5 minutes by doing this.

The initial heat up time is 20 minutes (slightly longer when full of plastisol) and will maintain an operational temperature indefinitely after the initial heating time.

The melting pots are cleaned by being drained completely and then wiped out with cloth wrapped on a wood dowel rod. The pots must be hot. It only takes a few minutes.

Results will vary when injecting laminate two colors baits depending on the mold layout.I can guarantee that two full streams of plastisol of different colors will flow out of the nozzle of this machine, but I can not guarantee how the plastisol will flow inside a mold. Every mold may fill out differently and those variances will have to be processed out with temperature and PSI adjustments to achieve your desired results.

The two heat controllers are used to control and monitor the plastic temperature in each heating pot. A temperature difference of up to 30 F between the pots is obtainable.

These are built when ordered, lead time is normally one to two weeks and will include everything needed to operate when delivered. (excluding an air compressor) Just plug in & play. Payment options are available. See below for more information

All prices are in USD Copyright 2024 JACOBS MOLD & MACHINE. Sitemap | Shopping Cart Software by BigCommerce