3D printing is a separate set of processes from injection molding. With 3D printing, the material is deposited in a layer-by-layer process guided by a 3D model of the desired part. With injection molding, molten plastic is injected into a mold cavity under high pressure, creating a part all at once. Both processes are considered to be "Additive Manufacturing".

It is often used to produce quick and high-quality prototypes and samples. The molds are two pieces that are held together with force and extreme pressure to create an accurate prototype after the process of prototype material selection that can be used to study the efficiency and usability of a part or product.

The reciprocating screw forces this melted plastic through the nozzle, which is seated within a depression in the mold known as a mold sprue bushing. The moving platen pressure fits the mold and the nozzle together tightly, ensuring no plastic can escape. The melted plastic is pressurized by this process, causing it to enter all parts of the mold cavity and displacing cavity air out through the mold vents.

This article presented the basics of injection molding to explain how it works, the materials that can be used, and how the process differs from other techniques such as 3D printing. We hope this article helped readers understand this manufacturing process and how it can add immense value to manufacturing capacity, given a few key considerations.

Plastic injection molding is a popular manufacturing technique in which thermoplastic pellets are converted into high volumes of complex parts. The injection molding process is suitable for a variety of plastic materials and is a vital aspect of modern life—phone cases, electronic housings, toys, and even automotive parts would not be possible without it. This article will break down the basics of injection molding, describe how injection molding works, and illustrate how it is different from 3D printing.

Prototype injection molding refers to creating a prototype using molds in less time. It is a process that is chosen for the rapid production of prototypes. In this process, molten plastic gets injected into a mold, thus creating a prototype that can be tested to check whether a part or product works.

Designers (engineers, mold maker businesses, etc.) create a part (in the form of a CAD file or other transferrable format), following fundamental design guidelines specific to the injection molding process. Designers should try to include the following features in their designs to help increase the success of a plastic injection mold:

After operators obtain the finished mold, it is inserted into the injection molding machine, and the mold closes, starting the injection molding cycle.

Choosing the right plastic for plastic injection molding can be difficult—there are thousands of options in the market from which to choose, many of which will not work for a given goal. Luckily, an in-depth understanding of the desired material properties and intended application will help narrow the list of potential options into something more manageable. When considering the application, it is important to keep in mind the following questions:

Prototype injection molding can be a great option that will be perfect due to many reasons. It has been designed to provide a large output with lesser effort and resources. Apart from this, several more amazing options are available for rapid prototyping.

Once the plastic has filled the mold including its sprues, runners, gates, etc., the mold is kept at a set temperature to allow uniform solidification of the material into the part shape. A holding pressure is maintained while cooling to both stop backflow into the barrel and reduce shrinking effects. At this point, more plastic granules are added to the hopper in expectation of the next cycle (or shot). When cooled, the platen opens and allows the finished part to be ejected, and the screw is drawn back once more, allowing material to enter the barrel and start the process over again.

The components of an injection molding machine include hopper, a barrel, a reciprocating screw, heater(s), movable platen, a nozzle, a mold, and a mold cavity.

In Plastic Injection Molding, plastic injection molds come out with suitable surface quality and are essentially ready for application (with only sprues, runners, gates, and minor defects to manage). Thermoplastics are generally the preferred material used in injection molding, though newer injection molding processes can accept thermosets, impregnated materials, some metal powders, and some types of ceramics.

More time efficient: It is an accelerated process as it can produce your first part within 2-4 weeks with the right prototype material selection. Prototype injection molding is time efficient, especially when you have to produce multiple parts. It is more than 40% faster than a machine. It can help you create more.

Included below is a table of the common injection molding plastics, each with its own set of advantages and general industry applications:

There can be many reasons one chooses injection molding for prototype processing, but will it be the right choice for your project? Let’s find out.

Xometry offers a full range of injection molding capabilities to help with your production needs. Visit our website to explore the full range of our capabilities or to request a free, no-obligation quote.

Use of plastic injection: Prototype injection molding requires plastic injection, which requires a special set of skills, does skilled labor with a specific qualification, which invites the hassle of finding a suitable candidate. Apart from that, finding especially skilled employees can put a strain on the entire budget and the process.

Lower concept risk: As it is made of aluminum or soft metal alloy, the concept risk is quite lower with prototype injection molding. The material is easy to machine, making it easier to modify and alter. It provides much freedom to alter and put changes to previous output.

Low Financial Risk: It may be known as the most expensive prototyping process, but when it comes to producing with right prototype material selection, it will be a smart investment. It can help you produce thousands of parts in no time. Those parts will be your property and can be used to produce small fragmented plastic parts.

With 3D printing, the material is deposited in a layer-by-layer process guided by a 3D model of the desired part, while with injection molding, molten plastic is injected into a mold cavity under high pressure, creating a part all at once. To learn more, see our guide on 3D Printing vs. Plastic Injection Molding.

In 3D Printing, Supports for overhangs and voids are also printed with the part, as well as additional features to reduce warping and other defects. 3D printing is a lengthy process, taking at minimum several hours, and can take a few days depending upon the size and complexity of the printed object. 3D printed parts are commonly produced out of thermoplastics, but other possible materials include thermosets, impregnated plastics, ceramic powder, and metal/alloy powder.

Highly skilled machinists and toolmakers, using the product design, fabricate a tooling mold for the injection molding machine. A tooling mold (also known as simply a tool) is the heart and soul of the injection molding machine. They are carefully designed to contain the negative cavity for the product design and additional features such as sprues, runners, gates, vents, ejector systems, cooling channels, and moving components. Tooling molds are made out of specific grades of steel and aluminum that can withstand tens of thousands (and sometimes hundreds of thousands) of heating and cooling cycles, such as 6063 aluminum, P20 steel, H13 steel, and 420 stainless steel. The mold fabrication process takes upwards of 20 weeks to complete, including both fabrication and approval, making this step the most extended aspect of injection molding. It is also the most expensive part of injection molding, and once a tooling mold is fabricated, it cannot be drastically changed without incurring additional costs.

Plastic granules are fed into the hopper and into the barrel. The reciprocating screw is drawn back, allowing materials to slip into the space between the screw and the barrel. The screw then plunges forward, forcing the material into the barrel and closer to the heater bands where it melts into molten plastic. The melting temperature is kept constant as per the material specifications so that no degradation occurs in the barrel or in the mold itself.

Most expensive prototyping process: As discussed earlier, manufacturing a prototype will be less expensive, but the investment is relatively high. The cost of the equipment and the injection materials is very much higher. The labor cost is also something that will prove to be challenging with prototype injection molding.

Prototyping is a crucial step in the design and development of a product. It ensures the product, as envisioned in the design phase, is brought to life through a functional prototype. Of late, injection molding has emerged as the first choice prototyping method for manufacturers.

Time-taking process: Even though being quicker than standard injection molding, it is a longer process than some of the other prototype technologies. It takes time, as one must create a mold and inject materials to create the parts.

The basics of plastic injection molding process includes creating the product design, making a tooling a mold to fit the product design, melting the plastic resin pellets, and using pressure to inject the melted pellets into the mold.

Well, every process has its pros and cons, and so does prototype injection molding. When it comes to limitations, it has a fair share of it, from being the most expensive to the use of plastic injection and choosing prototype injection molding.

A good pointer to keep in mind is material selection also depends on the product design, both in the application and in complexity. For example, designs calling for bendable sections/living hinges will require a strong yet flexible plastic like polypropylene. Similarly, structural parts that must be resistant to chemicals, abrasions, etc. should prioritize plastics like PEEK, Nylon, and others within these families. Â

The content appearing on this webpage is for informational purposes only. Xometry makes no representation or warranty of any kind, be it expressed or implied, as to the accuracy, completeness, or validity of the information. Any performance parameters, geometric tolerances, specific design features, quality and types of materials, or processes should not be inferred to represent what will be delivered by third-party suppliers or manufacturers through Xometry’s network. Buyers seeking quotes for parts are responsible for defining the specific requirements for those parts. Please refer to our terms and conditions for more information.Â

The injection molding cycle works by this continuous process—closing the mold, feeding/heating the plastic granules, pressurizing them into the mold, cooling them into a solid part, ejecting the part, and closing the mold again. This system allows for the rapid production of plastic parts, and upwards of 10,000 plastic parts can be made in a workday depending upon the design, size, and material.

If you’re leaning towards prototype injection molding, you can enjoy many advantages which can positively affect your project. So here are the benefits of prototype injection molding.