The table below can be used to approximate the cost of plastic injection molding related to the most commonly used materials. These prices can vary, depending on the supplies and volume order.

If your provider is expected to deliver a ready or almost ready-to-use product, the packaging used may be the one your customers get to see directly. Some providers also offer personalized packaging services for this purpose.

Some companies offer the possibility of additional certification to your parts, at a cost. This implies the involvement of specialized engineers that are also licensed and are legally capable of offering these certifications.

If you want to impart special physical properties to the resin you're using, or simply defray the cost of using pure plastic resin, you can add additives. Commonly used materials like plasticizers and mineral fillers are among the cheapest that can be used, while products like lubricants and heat stabilizers can cost more than the polymer itself. There is a wide array of additives that impart a variety of properties, including glass fiber, ceramic fillers, pigments, UV stabilizers, plasticizers, and antioxidants. These materials can increase strength, impact resistance, durability, elasticity, and fatigue limit.

Part packaging costs range depending on whether you require consumer-facing or just shipping packaging. Larger manufacturers can also make use of automatic packaging, which reduces the risk of error and damage.

Your Name: Your Email: Resin: Estimated Life of Program: Estimated Annual Volume: Estimated Order Quantities (if Low Volume Molding Project): Target Price (Tooling/Piece Part): Message Attach a File ❌ ❌

Tooling costs depend on how complex or large your parts will be. In other words, if your part is complex (for example, if it has intricate geometry or dense walls), the manufacturer may need to use a special (i.e. more expensive) machine to complete your order.

Midwest Mold offers a cost-effective solution to challenges caused by parts that require the use of two different plastics. 2 Shot injection molding is a process that molds one part using two different plastic resins. This enabling technology allows you to use two colors of plastics or to integrate both hard and soft plastics into one part without any post-molding assembly.

As a manufacturer, it is preferable to maintain the cycle time to as low as a number as possible, since that translates into the production of more parts in a given time.

Mold cavitation is related to part size and design. If your part is relatively simple, single cavity molds are usually more affordable. However, if the part's geometry allows it, it is preferable to go for multiple-cavity molds to speed up the production process (making production less expensive over time). Larger parts may, however, not allow for this.

Besides physical properties, the color of the part can also be influenced, which is one of the most popular uses for additives. These providers will also sometimes establish partnerships with the thermoplastic producers to offer customers cheaper deals.

Some parts may not need secondary services, while others do. The cheapest parts fall out of the machine and into a box, but others will form attached to the gate. Those require post-process machining to remove the gate, but they are used because gating makes the overall process more efficient and less wasteful.

Secondary services will range in cost, though often you can get a discount for ordering both injection molding and secondary services from the same provider (this also saves on shipping costs for another facility). These may come in the form of:

The content appearing on this webpage is for informational purposes only. Xometry makes no representation or warranty of any kind, be it expressed or implied, as to the accuracy, completeness, or validity of the information. Any performance parameters, geometric tolerances, specific design features, quality and types of materials, or processes should not be inferred to represent what will be delivered by third-party suppliers or manufacturers through Xometry’s network. Buyers seeking quotes for parts are responsible for defining the specific requirements for those parts. Please refer to our terms and conditions for more information.

Set scrap rates will also go into the final cost of injection molding. These are for purging the plastic injection molding machines of previous plastics from the barrel and screws as well as reloading them with your plastic.

Another aspect to keep in mind is that for custom injection molds, the geometry has to be compatible with the machine used by the manufacturer. This constraint may affect your project (and possibly design), so it is best to make sure the company you are interested in can fulfill the order.

Mold setup costs include optimizing the process as well as physically setting up the materials and machinery to create your parts. These are part of the final price per part. The process will be optimized, and there may be some setup time that goes into preparations, which most companies will charge as its own flat fee. This may encompass processes like drying the resin, hanging the molds, arranging water lines, external troubles, and any type of sensors in the mold. It may also include any type of special cooling required or specific gating scheme that acts as a hot manifold system (which keeps runners hot enough to keep the plastic in them liquid).

You can either buy a ready-made injection mold or have one made for you. Ready-made mold use is a common practice and the less expensive option, especially in the electronics industry since standardization is quite prevalent. You can also have one produced for you, which is better for unique designs.

The form impacts the cost of this material it is bought in, as not all polypropylenes are molding-ready. It is thus necessary to buy the plastic resin in pellet form. You may notice that engineering-grade plastics are generally more expensive (as with POM and PC). Overall though, the more materials you buy, the better your cost-effectiveness will become, as producers and distributors often have high-volume discounts which translate into better prices for your project.

Injection molding costs can vary depending on materials, equipment, mold cavitation, packaging, necessary certifications, and additional services employed. While your project may have strict requirements for the functionality of the desired part, there are multiple ways one can cut costs without sacrificing quality.

Injection molding tooling cost increases exponentially if we are talking about a large custom-designed part. From the operator's perspective, it is preferable to use small (desktop) injection molding machines (and even 3D printers) in order to fulfill low-volume orders.

Injection molded parts cost varies based on mold upkeep, the time to form a part, and factors around the plastic. These include the part rate, the estimated amount of scrap (usually 3-5%), the plastic weight, and sometimes a mold maintenance fee, which covers the cost of injection mold warranties. The quoted price should also include any setup costs for the molds.

Injection molding tooling for a mid-level order (around 1000-2000 small parts), can cost up to $10,000. For more complex geometries and large orders, the cost can go up to $100,000.

Injection molding costs from $10,000 or less to $100,000, depending on order size, part complexity, and other factors. Injection molding can be expensive to set up, but is cheaper over the long run, so it works best for large production volumes. There is a range of factors affecting the final price you would pay for injection molded parts, including the cost of the resin itself, tooling, cycle time, mold cavitation, and other details.

Plastic resins, which can range between $.90-$2+ per pound, are the primary material used in plastic injection molding, while additives can range from more expensive additives like heat stabilizers to cheaper plasticizers. When choosing a resin, take into account the following considerations:

Trained personnel are required to validate the quality of the parts included in your order. Generally, however, if the part does not meet requirements (or expectations), the quality verification team of your provider is tasked with identifying the area and possible cause of the issue. This is, however, an internal process that is taken into account when you first make your order (no additional costs should be applied in this scenario).

2 shot injection molding reduces the number of machines and molds required to mold two materials together into one part, and it minimizes part handling, all of which can add up to lower costs. In addition to financial benefits, 2 shot molding can provide:

Plastic weight cost includes both the plastic formed into parts and the hardened plastic left over in the mold. You'll also have to cover the cost of the plastic weight, not only in the parts but in the runner, sprue, and gate as well (the runner and sprue are channels molten plastic flows through to get into the mold, while the gate prevents plastic from flowing out once it's inside). For example, if you end up with 4lbs of parts, and 1lb of leftover plastic that hardens in the sprue and runner, you'll pay for 5 lbs.

Part inspection requirements costs for quality can include standard inspection or specialized certification, though specialized certification will cost more. The injection molding process itself can introduce defects of various degrees to parts (from cosmetic to critical). Some of them may be acceptable, depending on industry standards.

With 2 shot molding, parts can include a clear window, integrated gaskets, movable segments, water shields, or sound or vibration reduction.

Large, industrial plastic injection molding machines can cost over $200,000 and have additional costs that are related to skilled labor training, maintenance, monitoring, and even industry regulations. These types of machines are reserved for high-volume orders.

2 shot plastic injection molding enables the use of dissimilar resins to be used in a multi-part assembly. In some instances, a 2 shot mold application may include different colors and also soft and hard materials assembled together in in a single part.  Some of the benefits of 2 shot plastic injection molding include elimination of post-molding assembly, fewer injection molding machines to make a single part and reduced part handling by operators by utilizing a single molding operation.

Injection molding cycle time takes up about 60% of final part cost. The part rate comes down partially to cycle time and partially to cavitation, which is covered in the next section. Generally, manufacturers will have set hourly rates they charge for their machines.

In this equation α is the thermal diffusivity coefficient and h max is the maximum wall thickness in millimeters. While the first is a material-specific constant, the latter is a design choice or requirement. As such, depending on the part's complexity, the cycle time can take up to two minutes.

Extra steps such as finishing or post-processing services, inspection, and packaging represent an additional cost to the price per part and setup fees.

For questions regarding our quote form, data transfers or our FTP site for large files, please contact our data coordinator midwestmold@midwestmold.com.

However, to be able to do this, you should understand what exactly these areas are and how vital they are for your project. At Xometry, we offer the Xometry Quoting Engine to quickly get started on quoting your next injection molding project. Insert your requirements and designs into the Xometry's Quote Engine to get started and our experts will be in touch with you to start working out the details!

Mold cavitation cost, another factor in price per part rate, increases with the number of cavities. Cavitation is the amount of identical cavities that produce parts per mold. The injection mold itself can cost thousands of dollars.

Midwest Mold specializes in the design and build of 2 shot plastic injection molds and has successfully manufactured pre-production and production tooling for structural, water management, crash impact and noise reduction applications.

Saving money on injection molding can be helpful, but it’s important to be strategic around which areas you save money in. In order to maintain a cost-effective strategy for low cost injection molding, it is just as important to identify areas where trying to save money could cause bigger issues down the line as it is to find areas to lower the cost. The following tips will help you with both: