Phone +1 864 486 1478 Fax +1 864 486 3681 americas@sukano.com

No. 7, Jalan Hasil Kawasan Perindustr. Jln. Hasil 81200 Johor Bahru, Johor Malaysia

A bigger shift toward PLA in injection molding has been slowed by serious processing issues. There are several challenges that convertors have faced when processing injection molded PLA parts, especially when using existing equipment and tools, including:

SUKANO ® Mold Release Masterbatches can reduce the friction between the polymer chains. This leads to a lower melt viscosity and therefore a higher melt flow without increasing the temperature. This can help to fill the cavities, especially in thin wall applications.

Phone +41 44 787 57 77 Fax +41 44 787 57 78 emea@sukano.com

295 Parkway East Duncan SC 29334 USA

Customer cases have demonstrated that the switch from fossil-based plastics to PLA for injection molding is very much possible, all without major financial investments.

Phone +60 7 238 60 99 Fax +60 7 234 57 70 apac@sukano.com

A Release Agent facilitates the separation of the cured part from the mold. SUKANO® Mold Release Masterbatch migrates to the surface of the final product facilitating demolding of the injection molded part from the metal surface of the cavity, hence reducing the demolding force.

Chaltenbodenstrasse 23 8834 Schindellegi Switzerland