When it comes to producing plastic parts, 3D printing is working in a space where the conventional processing technology is injection molding.

It seems likely that moving forward, runs of perhaps 10,000 and below will soon be the domain of 3D printing, which for such volumes will render injection molding if not redundant, increasingly irrelevant when looked at through the prism of cost and time of production. However, injection molding will never be replaced, as it will typically be the technology of choice for higher volume runs.

3D printing finds its sweet spot in the area of prototyping and small to medium-sized production runs of geometrically complex parts and components with gaps, holes or voids. It is also the best fit for the manufacture or parts where the design will frequently evolve or where customization is required, as design changes can be accommodated even in production.

The 3D printing machines that achieve production level repeatability and accuracy are typically costly beasts. Because of this, many potential users are put off by the large capital outlay required, and therefore approach 3D printing subcontract specialists, who not only have the levels of necessary high-quality 3D printing machines in-house but also the experience to get the most out of them.

Alpine's flagship nanocomposite material HX5® offers the strength of aluminum at half the weight with environmental and thermal performance to withstand the harshest environments. HX5 can be formed into complex shapes and easily coated without sacrificing strength, performance or aesthetics. From prototypes to full-scale injection molding production, HX5 is an ideal alternative to the cost and production challenges associated with aluminum. For more information, visit www.alpineadvancedmaterials.com.

Most obviously, 3D printing can make components either impossible or expensive and difficult to achieve using injection molding, such as components that are hollow in certain areas. This is possible, as in 3D printing material is added in layers, and material density of the core can be altered. So, not only can some areas be hollow, but other critical areas can be reinforced. This means that 3D printing is a key facilitator when it comes to lightweighting, but with increased strength.

The idea that 3D printing is a plug-and-play technology is a myth. Entry-level desktop model printers only require a modicum of knowledge to operate. But for production applications, achieving the necessary build parameters, quality, costs per part and timeliness of build requires a heap of experience, which subcontract agencies have in spades.

"The clients we work with whose parts must meet various certifications – UL, FAA, and MIL-spec, among others – need to have a 'real' part to test against their real-world challenges. RPM facilitates that by getting testable parts into the field quickly," said David Brantner, Chief Executive Officer of Alpine Advanced Materials. "Think of companies bidding for military or aerospace contracts – it's powerful to have data that backs up whether your components actually work."

3D printing is a highly reliable, cost-effective and relatively easy-to-use production technology for small- to medium-volume applications and can rival injection molding.

Conversely, injection molding makes design iterations costly. Beyond the high cost of upfront tooling, which as mentioned increases the more complex the part, production is restricted to the location of the production tooling. 3D printing technologies manufacture direct from 3D CAD files, so the location of manufacture is much more flexible.

3D printing also promotes what can be called the consolidation of complexity. The technology can combine parts and features in one build that would otherwise have to be post-processed or assembled using conventional injection molding and allied technologies. And, printed parts can be more ergonomic and incorporate multiple parts and features that would be impossible or prohibitively expensive to achieve via the fabrication of highly complex injection molding tooling.

3D printing exhibits a number of advantages when compared to legacy processes such as injection molding. The most important of these is the added flexibility 3D printing allows in design.

This is based on the fact that today, 3D printing technologies have been refined to such an extent that they are truly viable production technologies. Now the conversation among manufacturers is around the most judicious use of 3D printing for production, what its advantages are, where the sweet spot is in terms of preferable volumes, what are the opportunities that exist through it use, and what are the barriers to entry?

These respective sweet spots are quite discrete and play to the fact that forward-thinking manufacturers could in fact be looking at 3D printing and injection molding as complementary processes rather than competitive processes. When used constructively together, for example, pre-production cycles can be dramatically shortened before large volume production is undertaken.

Also, as 3D printing is a digital process, it can be stopped post-part build or post-run and started again without punitive cost. Production volumes can be exactly aligned with demand day to day, week to week, month to month. With injection molding, once the production process is initiated, it needs to fulfill the full run immediately to remain economic, which therefore necessitates the need for warehousing—which increases the cost per part.

Injection molding is still the go-to technology for high-volume plastic part production, but it is characterized by significant up-front capital investment in tooling, which is also time-consuming and difficult and expensive to adapt. The technology can use several molds at the same time, which means that it is ideally suited to the mass manufacturer of parts and components cost effectively—its cost effectiveness also promoted by the fact that there is minimal wastage as material is precisely dosed to match specific mold requirements.

Beyond non-costly part complexity, using 3D printing for production also facilitates nearly unlimited geometric freedom, exhibits very low to zero iteration costs, and has low downtime in the production cycle.

"The clients we work with whose parts must meet various certifications – UL, FAA, and MIL-spec, among others – need to have a 'real' part to test against their real-world challenges. RPM facilitates that by getting testable parts into the field quickly," said David Brantner, Chief Executive Officer of Alpine Advanced Materials. "Think of companies bidding for military or aerospace contracts – it's powerful to have data that backs up whether your components actually work."

About Alpine Advanced Materials Alpine Advanced Materials is a leading expert in the design and manufacture of custom-engineered parts for the world's most demanding aerospace, defense, energy, space, and outdoor applications. With experience across multiple industries, a collaborative approach, and deep expertise in designing for manufacturing, Alpine delivers the future of innovation.

In addition, while there is an increasing number of material options that can be used with 3D printing, it still cannot match the choice of materials compatible with injection molding.

There will be few manufacturing enterprises that will not either have used or are flirting with the adoption of 3D printing at some level in 2021, be it as a complementary technology to existing legacy manufacturing processes, or indeed as an alternative. Many OEMs will be using desktop 3D printers for rapid prototyping, purely to get an early reasonably accurate 3D model of their product designs, but these printers are not designed for more exacting production applications, where repeatability and accuracy / tolerance attainment are vital.

Injection molding finds its sweet spot in large-batch production, where the requirement is for the manufacture of many thousands of identical products simultaneously. It is also best suited to robust designs based on one continuous form, and the process can produce products with superior smooth surface finish without the need for post-processing (which is typically needed with 3D printing parts).

DALLAS, Aug. 25, 2022 /PRNewswire/ -- Alpine Advanced Materials has introduced Rapid Prototype Molding (RPM) using Addifab's proprietary resin system and Nexa3D's printers to give clients a more rapid tool manufacturing solution that provides a functional and testable part at a fraction of the cost. Complementing Alpine's suite of high-performance engineered materials and advanced design services, RPM Freeform Injection Molding delivers complex injection molded parts more quickly and affordably than when using standard steel molds.

"One of the biggest barriers in transitioning to advanced materials is the weighty cost and time commitment required to test actual parts. Too often, the prospect of paying for a prototype that will cost tens of thousands of dollars stops innovation dead in its tracks," added Brantner. "With RPM, we allow our clients across aerospace, defense, unmanned aerial vehicles, space and outdoor to more easily tap into the power of new material and design technology for dramatically less time and money."

3D printing requires no tooling and is agile, which facilitates quick production turnaround. With 3D printing, part cost is not connected with part complexity. As soon as complexity is introduced to an injection molded part, the requirement is for more and more expensive mold tools, which leads to an exponential increase in costs until part production is no longer viable. As 3D printing adds material, complexity of design and different incorporated shapes do not affect the amount of time that it takes to produce a part, and therefore does not lead to increased costs.

Perhaps the biggest advantage of the use of 3D printing, however, is that although per part it is slow compared with injection molding, its advantages in terms of design freedom, creation of geometric complexity, and part consolidation all stimulate innovation. These factors alone may be a spur to using 3D printing for multiple smaller batch runs rather than bowing purely to the economics of using injection molding for high-volume manufacture.

3D printing is unique as a disruptive technology in one key respect, and that is having disrupted the manufacturing paradigm through the introduction of rapid prototyping some 25 to 30 years ago. It is disrupting manufacturing again.

Using RPM, Alpine clients can additively manufacture a tool cavity injection mold, a negative of the designed part, then create the prototype using the dramatically cheaper mold. Once produced, the mold is dissolved away, leaving an injection molded prototype with fiber alignment for strength and without the surface finish issues of 3D printing. Additionally, with separable components, RPM allows for two-part tools that can be used repeatedly for low volumes that also convey both form and function equivalent to that of a standard steel tool. Alpine is known for both HX5 and its advanced design for manufacturing services, helping companies evolve to use new materials and methods in designing superior parts and components.

With 3D printing, ideal material conditions throughout a part are dictated by design, not by the vagaries of various production and post-production processes used.

A significant drawback, however, is the fact that there are design limitations inherent in injection molding, with some geometries being difficult to remove from the mold, and precise and delicate designs being difficult and expensive to mold accurately. Also, it is difficult, costly and sometimes impossible to correct tooling mistakes or change tooling to optimize or iterate new designs. Often, new tools are required, with all this implies in terms of cost and time—tools often taking weeks if not months to fabricate.

"The design freedom Alpine can now offer their clients with Addifab Freeform Injection Molding opens the way to faster, cheaper, and greener product development," said Carsten Jarfelt, Chief Commercial Officer of Addifab in the USA. "Our technology supports product development with economical prototype tooling, cutting an average of 85 percent off the price a first functional component, and can make it faster than ever before."

Filling the gap between a 3D printed part, which can get a client close in shape but is limited by mechanical performance, and an injection molded part, which provides form and function but requires investment in tooling, RPM delivers production-level components at a relatively low cost ideal for low volume testing. Giving product designers the chance to fully prove a part before committing to a steel mold, RPM also allows for design iterations that make testing more dynamic.