Kim, S. H. et al. Large-scale femtoliter droplet array for digital counting of single biomolecules. Lab Chip 12, 4986–4991 (2012).

Miller, M. B. & Tang, Y.-W. Basic concepts of microarrays and potential applications in clinical microbiology. Clin. Microbiol. Rev. 22, 611–633 (2009).

Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.

Join Engel in exploring the future of battery molding technology. Discover advancements in thermoplastic composites for battery housings, innovative automation solutions and the latest in large-tonnage equipment designed for e-mobility — all with a focus on cost-efficient solutions. Agenda: Learn about cutting-edge thermoplastic composites for durable, sustainable and cost-efficient battery housings Explore advanced automation concepts for efficient and scalable production See the latest large-tonnage equipment and technology innovations for e-mobility solutions

We purchased the following monomers and initiator from Sigma-Aldrich, Germany: pentaerythritol tetrakis(3-mercaptopropionate) (PETMP), 1,3,5-triallyl-1,3,5-triazine-2,4,6(1H,3H,5H)-trione (TATATO), 3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10,10-heptadecafluorodecyl methacrylate (FDMA), 2-hydroxyethyl methacrylate (HEMA), and photo-initiator 1-hydroxycyclohexyl phenyl ketone (Irgacure 184). We synthesized the OSTE precursor with excess of allyl functional groups with the following subsequent steps: (i) mixing the allyl monomer TATATO with the photo-initiator (52.32 and 0.5 wt% of the final mixture, respectively), (ii) heating the mixture to 75 °C for 10 min to facilitate the dissolution of the solid photo-initiator, (iii) adding the thiol monomer PETMP (47.08 wt% of the final mixture), (iv) mixing and subsequent degassing, (v) adding HEMA and FDMA, both at 0.05 wt%, and (vi) mixing again.

This Knowledge Center provides an overview of the considerations needed to understand the purchase, operation, and maintenance of a process cooling system.

Future work should examine the potential of RIM-based microwell arrays for digital bioassays aiming for single molecule detection. Furthermore, translating the current technology to industrial RIM standards needs a re-adjustment of the mold material, mold cleaning protocols, injection settings, and demolding.

We performed CA measurements using a Theta Lite optical tensiometer (TL100, Finland) on non-structured polymer parts replicated from flat, Teflon-coated and bare fused silica molds, respectively. We chose three random areas on each sample and calculated the average CA accordingly. We performed the CA measurements immediately after the RIM process and 11 months after the RIM process measurements to allow measuring surface energy recovery over time.

Processors with sustainability goals or mandates have a number of ways to reach their goals. Biopolymers are among them.

a Schematic of fluorescein and oil stacked on top of HIH microwells followed by the fluorescein removal. b Schematic of the resulting femtolitre fluorescein microdroplets trapped inside the wells. c Top view fluorescence microscopy image of fluorescein microdroplets inside HIH femtolitre-wells: the dark region in the top half of the image has been only in contact with oil whereas the lower half of the image is printed by the receding fluorescent droplet. The dashed line indicates the border of the fluorescein droplet shown in (a)

Say “manufacturing automation” and thoughts immediately go to the shop floor and specialized production equipment, robotics and material handling systems. But there is another realm of possible automation — the front office.

Donzel, C. et al. Hydrophilic poly (dimethylsiloxane) stamps for microcontact printing. Adv. Mater. 13, 1164–1167 (2001).

The unique benefit of our fabrication approach is the simultaneous molding and selective and stable surface energy patterning of microstructures in a single process step, while inheriting all benefits from RIM processing, including short-cycle time, facile processing, low tooling cost of RIM settings along with a surface reactive polymer for additional covalent bonding when fluidic integration is intended. The rapid cycle time, limited mainly by the 15 s UV exposure, constitutes by far the most rapid HIH production method reported. We speculate that the cycle time can be reduced to be on par with the typical standard injection molding cycle times, i.e., 2–5 s, by using a more rigid mold material such as quartz, by a vertical demolding set-up, or by adding more photoinitiator in the polymer precursor.

The RIM setup is comprised of two mold halves which come together to form the negative shape of the final chip. The first mold half is a 5 mm thick Al sheet (4.5 × 7.4 cm2) CNC milled (MiniMill GX, Minitech Machinery Corp., USA) with a 3.5 × 3.5 cm2 indentation to form a cavity. Inlet and outlet channels connect the cavity to the edges of the mold.

The fabrication method for the silica/TeflonTM mold half requires only one photolithography step, resulting in a self-aligned structural and surface energy micropattern where exposed silica provides hydrophilic surfaces and TeflonTM hydrophobic surfaces (Fig. 1a–e). The molds contain a 5 × 5 matrix of micropillar arrays, with a total of 1,843,650 circular pillars, with diameters in the range of 2.5–4.5 μm, and a centre-to-centre pitch in the range of 7–9 μm (Fig. 1f, g; see Fig. S1 for mold design details). The micropillar heights were in the range 3–4.5 μm. We injected an OSTE-based precursor, containing hydrophobic and hydrophilic chemical moieties, into the mold. During incubation in contact with the mold, the chemical moieties in the polymer network self-assemble on mold surface sections with matching surface energy. Cross-linking of the precursor during a 15 s UV exposure fixates the replica microstructure and its surface energy patterns, after which the replica is demolded. A mold consisting of micropillar arrays thus enables in situ surface energy patterned HIH femtolitre-well arrays with hydrophilic well bottom and sidewalls and hydrophobic interspacing. We observed a high-replication fidelity regarding geometry, size, and defectivity of the microwell arrays during microscopy inspection and optical profiling (Fig. S3). Contact angle measurements on larger planar features substantiate the successful mimicking of surface energy from the molds to the counterpart replica surfaces. The contact angle (CA) of the hydrophobic replica surfaces increases with the incubation time between injection and UV curing, from 90° ± 2.8 for no incubation to 104° ± 2.3 when incubating for 60 min (Fig. S2). The CA of hydrophilic replica surfaces was 59° ± 2.6, independent of the incubation time. The surface energy of the fully cured replicas was re-examined after 11 months storage of the samples in our ambient laboratory conditions (Table S1).

Lobov, G. S. et al. Electro-optical effects of high aspect ratio p3ht nanofibers colloid in polymer micro-fluid cells. Opt. Lett. 42, 2157–2160 (2017).

In this collection of articles, two of the industry’s foremost authorities on screw design — Jim Frankand and Mark Spalding — offer their sage advice on screw design...what works, what doesn’t, and what to look for when things start going wrong.

Becker, H. & Gärtner, C. Polymer microfabrication technologies for microfluidic systems. Anal. Bioanal. Chem. 390, 89–111 (2008).

Hydrophilic-in-hydrophobic (HIH) femtolitre-well arrays for digital bioassays are an example of structures that would greatly benefit from simpler fabrication techniques. Digital bioassays commonly exploit arrays of microwells as their hardware and can extensively benefit from selective surface energy patterning9. In such systems, the sample of interest is compartmentalized in well reactors amenable to high-throughput screening or online monitoring10. Such systems enable the ultra-sensitive detection of target molecules on a single-molecule level11. A common solution for efficient isolation of wells is to provide hydrophilic wells in a hydrophobic field. In bead-based digital assays, each well acts as a microchamber that traps a single bead functionalized with bioreceptors and surrounded by a micro-droplet of reagent. Femtolitre-well arrays for bead seeding in digital bioassays were previously fabricated mainly using cleanroom-based techniques9,12,13,14, poly(dimethylsiloxane) (PDMS) stamp imprinting15, or IM16,17. However, these materials and fabrication methods are expensive, not scalable, or do not result in defined surface energy features, the latter resulting in an inefficient bead seeding, leading to limited assay performance18.

The high-seeding efficiency reported here is ascribed to the successful surface energy patterning of the arrays and is of significance for bead-based bioassays, which require rapid and efficient bead seeding. Our results compare well with the estimated 40–50% gravity-based bead loading efficiency achieved in the SIMOA process16 and the maximum 35% efficiency obtained in previously reported single-step seeding12.

In a time where sustainability is no longer just a buzzword, the food and beverage packaging industry is required to be at the forefront of this innovation. By adopting circular packaging processes and solutions, producers can meet regulatory requirements while also satisfying consumer demand and enhancing brand reputation. Join Husky to learn more about the broader implications of the circular economy — as well as how leading brands are leveraging this opportunity to reduce costs, increase design flexibility and boost product differentiation. Agenda: The cost and operational benefits of embracing circularity Key materials in circular packaging — including rPET and emerging bioplastics How to design a circular food and beverage package Strategies for selecting sustainable closures to future-proof packaging solutions Optimization and streamlining of production processes for enhanced efficiency How Husky Technologies can enable your sustainable success

Join KraussMaffei for an insightful webinar designed for industry professionals, engineers and anyone interested in the manufacturing processes of PVC pipes. This session will provide a comprehensive understanding of the technology behind the production of high-quality PVC pipes: from raw material preparation to final product testing. Agenda: Introduction to PVC extrusion: overview of the basic principles of PVC pipe extrusion — including the process of melting and shaping PVC resin into pipe forms Equipment and machinery: detailed explanation of the key equipment involved — such as extruders, dies and cooling systems — and their roles in the extrusion process Process parameters: insight into the critical process parameters like temperature, pressure and cooling rates that influence the quality and consistency of the final PVC pipes Energy efficiency: examination of ways to save material and energy use when extruding PVC pipe products

The dynamic range of a digital bioassay is related to the number of microwells, with the demonstrated array size of 105–107 wells theoretically enabling digital target detection with a dynamic range of 6–8 orders of magnitude27. The demonstrated well size and pitch in the µm range are small enough to facilitate integration of large arrays, but large enough for optical detection of individual wells. A mold pillar height/depth aspect ratio of 1/1 results in low-defectivity in terms of pillar collapse while providing a sufficient depth of the wells for trapping beads. For mold pillar aspect ratios >1, the manual and nonvertical demolding led to their occasional collapse.

Said Danimer Scientific’s CTP Phil Van Trump, "Reducing the environmental impact of single-use plastic waste is one of the most pressing issues facing our planet, and with the DOE's support, we can explore potential new areas of applications for PHAs that have not been tried before. We thank the DOE for its support of this project and are looking forward to breaking new ground in the world of biodegradable plastics."

Sustainability continues to dominate new additives technology, but upping performance is also evident. Most of the new additives have been targeted to commodity resins and particularly polyolefins.

Of the eight biomanufacturing companies selected by the U.S. Department of Energy to recieve a total of $5.7 million, Danimer Scientific is the sole recipient focuses on biodegradable plastics.

Shafagh, R. Z., Vastesson, A., Guo, W., Wijngaart, Wvander & Haraldsson, T. E-beam nanostructuring and direct click biofunctionalization of thiol–ene resist. ACS Nano 12, 9940–9946 (2018).

N. Sandström, et al. Reaction injection molding and direct covalent bonding of oste+ polymer microfluidic devices. J. Micromech. Microeng. 25, 75002–75014 (2015).

While prices moved up for three of the five commodity resins, there was potential for a flat trajectory for the rest of the third quarter.

Join Wittmann for an engaging webinar on the transformative impact of manufacturing execution systems (MES) in the plastic injection molding industry. Discover how MES enhances production efficiency, quality control and real-time monitoring while also reducing downtime. It will explore the integration of MES with existing systems, emphasizing compliance and traceability for automotive and medical sectors. Learn about the latest advancements in IoT and AI technologies and how they drive innovation and continuous improvement in MES. Agenda: Overview of MES benefits What is MES? Definition, role and brief history Historical perspective and evolution Longevity and analytics Connectivity: importance, standards and integration Advantages of MES: efficiency, real-time data, traceability and cost savings Emerging technologies: IoT and AI in MES

Wilson, D. H. et al. The simoa hd-1 analyzer: a novel fully automated digital immunoassay analyzer with single-molecule sensitivity and multiplexing. J. Lab. Autom. 21, 533–547 (2016).

Across all process types, sustainability was a big theme at NPE2024. But there was plenty to see in automation and artificial intelligence as well.

In this three-part collection, veteran molder and moldmaker Jim Fattori brings to bear his 40+ years of on-the-job experience and provides molders his “from the trenches” perspective on on the why, where and how of venting injection molds. Take the trial-and-error out of the molding venting process.

Gifted with extraordinary technical know how and an authoritative yet plain English writing style, in this collection of articles Fattori offers his insights on a variety of molding-related topics that are bound to make your days on the production floor go a little bit better.

The RIM platform demonstrated here is adapted for use in laboratory settings, allowing a potential widespread dissemination of the technology. Because life science research typically relies on several tens of identical devices to verify the reproducibility of experiments, the rapid device replication offers an attractive alternative to the manual and error-prone per-part assembly of soft lithography-based devices.

Plastics Technology’s Tech Days is back! Every Tuesday in October, a series of five online presentations will be given by industry supplier around the following topics:  Injection Molding — New Technologies, Efficiencies Film Extrusion — New Technologies, Efficiencies Upstream/Downstream Operations Injection Molding — Sustainability Extrusion — Compounding Coming out of NPE2024, PT identified a variety of topics, technologies and trends that are driving and shaping the evolution of plastic products manufacturing — from recycling/recyclability and energy optimization to AI-based process control and automation implementation. PT Tech Days is designed to provide a robust, curated, accessible platform through which plastics professionals can explore these trends, have direct access to subject-matter experts and develop strategies for applying solutions in their operations.

Part of the Agile BioFoundry (ABF) consortium, the eight projects selected by the DOE will leverage National Laboratory capabilities to address challenges in biomanufacturing. Sponsored by the DOE Office of Energy Efficiency and Renewable Energy's Bioenergy Technologies Office, the ABF aims to advance biomanufacturing by uniting and expanding the capabilities of the National Laboratories to develop a robust, agile biomanufacturing platform accessible to researchers across the private and public sectors  ABF partners include Argonne National Laboratory, Lawrence Berkeley National Laboratory, Los Alamos National Laboratory, Oak Ridge National Laboratory, Pacific Northwest National Laboratory, Sandia National Laboratories, the National Renewable Energy Laboratory, and more than a dozen university and industry partners.

Figure 1 illustrates the specifically developed mold fabrication process, the replication process that combines RIM of OSTE with area-selective monomer self-assembly, and the resulting replicas and their surface energies. We developed a two-part HIH mold consisting of a milled Al half with good thermal conductivity, and a UV transparent microstructured half consisting of fused silica and TeflonTM. Using a hard mask is compatible with industrial injection molding settings in which a material of high Young-modulus circumvents the deformation and collapse of delicate microscale mold features. This is in contrast to use of PDMS, a prevalent material of choice in academia, which is prone to deformation and subsequent feature distortion during the molding process and therefore not easily applicable to commercial set-ups.

Vergauwe, N. et al. A versatile electrowetting-based digital microfluidic platform for quantitative homogeneous and heterogeneous bio-assays. J. Micromech. Microeng. 21, 054026 (2011).

Pardon, G., Haraldsson, T. & van der Wijngaart, W. Simultaneous replication of hydrophilic and superhydrophobic micropatterns through area-selective monomers self-assembly. Adv. Mater. Interfaces 3, 1600404–n/a (2016). 1600404.

While the melting process does not provide perfect mixing, this study shows that mixing is indeed initiated during melting.

a Schematic of the magnetic bead seeding on HIH microwell arrays. b The bead distribution in arrays with well diameter 3.5 μm and with varying array pitch and well depth, for single- and multiple-seeding cycles (n = 5). Dots indicate results from each experiment; columns indicate the average ratio of wells that contain a given number of beads; error bars mean ± s.d. c, d ×40 magnification bright field microscopy image of a microwell array before and after magnetic bead seeding, respectively. Bright spots indicate empty microwells and dark spots indicate filled microwells. e ×100 magnification bright field microscopy image of a microwell array after seeding, where one well is empty (bright), two wells contain two beads, and all other wells contain one bead

Across the show, sustainability ruled in new materials technology, from polyolefins and engineering resins to biobased materials.

The Plastics Industry Association (PLASTICS) has released final figures for NPE2024: The Plastics Show (May 6-10; Orlando) that officially make it the largest ever NPE in several key metrics.

Resin drying is a crucial, but often-misunderstood area. This collection includes details on why and what you need to dry, how to specify a dryer, and best practices.

Despite price increase nominations going into second quarter, it appeared there was potential for generally flat pricing with the exception of a major downward correction for PP.

Hoyle, C. E., Lee, T. Yeon & Roper, T. Thiol–enes: chemistry of the past with promise for the future. J. Polym. Sci. Part A 42, 5301–5338 (2004).

We express our gratitude to Mercene Labs, Sweden, for their kind contribution of OSTE polymer. We would also like to thank Cecilia Aronsson and Mikael Bergqvist for their contribution to the technical aspects of the research. We furthermore would like to acknowledge Prof. Paula Moldenaers of the Soft Matter, Rheology and Technology group at KU Leuven (Belgium) for providing the facilities for the contact angle measurements and Prof. Michael Kraft of the MICAS group at KU Leuven (Belgium) for providing the facilities for the 3D optical profile measurements. This work was financially sponsored, in part, by the European Union and EFPIA through the IMI project RAPPID and by the European Union through the FP7 project NOROSENSOR. This work has also received funding from Research Foundation-Flanders (FWO SB/1S30116N).

Rissin, D. M. et al. Single-molecule enzyme-linked immunosorbent assay detects serum proteins at subfemtomolar concentrations. Nat. Biotechnol. 28, 595 (2010).

We dragged a 30 μL droplet of a 0.25 mg/mL fluorescein solution (Sigma-Aldrich, Belgium) over the microwell array. We subsequently covered the droplet of fluorescein with a 180 μL droplet of PlusOne Drystrip Coverfluid oil (Sigma-Aldrich, Belgium) to prevent evaporation. Next, we removed the fluorescein from underneath the oil using a glass pipette tip, first dragging the fluorescein droplet away from the array, then pipetting the fluorescein out from underneath the oil. The sealed microwells were visualized using an inverted fluorescence microscope (Nikon TiEclipse, Japan), using a TITC filter (excitation 465–495 nm, emission 515–550 nm).

Bioplastics are here to stay and even during difficult economic times appear to be getting increasing attention as indicated by the recent grant announcements by the U.S. Department of Energy (DOE). Danimer Scientific, Bainbridge, Ga., has received a grant to expand commercialization of its Nodax PHA (polyhydroxyalkanoate). Of the eight biomanufacturing companies the DOE selected to receive a total of nearly $5.7 million, Danimer Scientific is the sole recipient focused on creating biodegradable plastics.

In less than a decade in injection molding, US Merchants has acquired hundreds of machines spread across facilities in California, Texas, Virginia and Arizona, with even more growth coming.

Decrop, D. et al. Single-step imprinting of femtoliter microwell arrays allows digital bioassays with attomolar limit of detection. ACS Appl. Mater. interfaces 9, 10418–10426 (2017).

The CA measurements demonstrate the surface energy pattern replication. The reduced concentration of hydrophilic or hydrophobic moieties resulted in microstructured replicas with excellent functionality, but also in a dependence of the hydrophobic mimicking phenomenon on the incubation time. Nevertheless, even at zero incubation time, the hydrophobic surfaces feature an equilibrium CA equal to 90°, which proved sufficient for bead seeding and well sealing. Although the degree of hydrophilicity associated to the replica is lower than that of glass, it is sufficient for droplet entrapment inside the microwells. The CA on the hydrophobic polymer surface did not change significantly during long-term storage; that of the hydrophilic surface reduced from 59.3 ± 2.6° to 48.1 ± 2.2°. We attribute this increase of hydrophilicity to oxidation of the thiol groups when exposed to the ambient air28. Compared to postprocess surface modification techniques such as plasma treatment of PDMS, which is prone to fast recovery of surface energy, our method offers a far more stable surface energy definition with some degree of enhancement regarding the hydrophilic surfaces over time.

After successfully introducing a combined conference for moldmakers and injection molders in 2022, Plastics Technology and MoldMaking Technology are once again joining forces for a tooling/molding two-for-one.

In this collection of content, we provide expert advice on welding from some of the leading authorities in the field, with tips on such matters as controls, as well as insights on how to solve common problems in welding.

Additive technology creates air pockets in film during orientation, cutting down on the amount of resin needed while boosting opacity, mechanical properties and recyclability.

Exhibitors and presenters at the plastics show emphasized 3D printing as a complement and aid to more traditional production processes.

Kan, C. W. et al. Isolation and detection of single molecules on paramagnetic beads using sequential fluid flows in microfabricated polymer array assemblies. Lab Chip 12, 977–985 (2012).

Core Technology Molding turned to Mold-Masters E-Multi auxiliary injection unit to help it win a job and dramatically change its process.

We used an optical profilometer (SENSOFAR S lynx with software SensoSCAN 6.4) for 3D optical cross-sectional imaging of micropillar and microwell arrays.

Heckele, M. & Schomburg, W. K. Review on micro molding of thermoplastic polymers. J. Micromech. Microeng. 14, R1 (2003).

Rondelez, Yannick et al. Microfabricated arrays of femtoliter chambers allow single molecule enzymology. Nat. Biotechnol. 23, 361 (2005).

Here, we demonstrate a molding technique capable of microstructuring and 3D in situ surface energy patterning in a single step. We use this platform for high-throughput, scalable replication of HIH femtolitre-well arrays and demonstrate a record-high seeding efficiency of magnetic beads in femtolitre-well arrays.

To investigate the potential of surface energy patterned microwells for digital bead-based bioassays, we seeded well arrays with magnetic beads (Fig. 3). All CA combinations were sufficient for bead seeding in surface energy patterned microwells, allowing minimizing the RIM incubation time. Digital counting of the magnetic beads revealed seeding efficiencies as high as 75.1 ± 6.0% for single-step seeding and 87.2 ± 0.3% for multiple-step seeding (Fig. 3b, Table S2).

All of Danimer Scientific's biopolymers, including Nodax PHA, are FDA approved for food contact. Nodax PHA is biodegradable in anaerobic soil, freshwater and marine environments and is 100% bio based. It also possesses seven TUV Austria certifications and statements of industrial and home compostability,.

To demonstrate the hydrophilic nature of the bottoms of the microwells, we isolated fL-sized droplets of an aqueous solution of fluorescein in the microwells and sealed them with oil to prevent evaporation. Visualization of the aqueous fluorescein droplets and the absence of fluorescence at the interspacing surface confirms the HIH nature of the array (Fig. 2).

Successfully starting or restarting an injection molding machine is less about ticking boxes on a rote checklist and more about individually assessing each processing scenario and its unique variables.

Witters, D., Knez, K., Ceyssens, F., Puers, R. & Lammertyn, J. Digital microfluidics-enabled single-molecule detection by printing and sealing single magnetic beads in femtoliter droplets. Lab Chip 13, 2047–2054 (2013).

Patterning of micro- and nanoscale topologies and surface properties of polymer devices is of particular importance for a broad range of life science applications, including cell-adhesion assays and highly sensitive bioassays. The manufacturing of such devices necessitates cumbersome multiple-step fabrication procedures and results in surface properties which degrade over time. This critically hinders their wide-spread dissemination. Here, we simultaneously mold and surface energy pattern microstructures in off-stoichiometric thiol-ene by area-selective monomer self-assembly in a rapid micro-reaction injection molding cycle. We replicated arrays of 1,843,650 hydrophilic-in-hydrophobic femtolitre-wells with long-term stable surface properties and magnetically trapped beads with 75% and 87.2% efficiency in single- and multiple-seeding events, respectively. These results form the basis for ultrasensitive digital biosensors, specifically, and for the fabrication of medical devices and life science research tools, generally.

When, how, what and why to automate — leading robotics suppliers and forward-thinking moldmakers will share their insights on automating manufacturing at collocated event.

The RIM process is illustrated in Fig. 1g–j. A 5 mL syringe was filled with OSTE precursor, equipped with a 1.20 mm by 40 mm Sterican blunt needle and actuated to purge air bubbles from the tip of the syringe and needle. The needle was fitted to the inlet tube, and the syringe was slowly actuated to inject the precursor into the cavity. To allow for shrinkage compensation during curing, we adjusted the volume of precursor injected to include the volume of the entire mold chamber and part of the outlet channel. We, thereafter, removed the syringe and needle. The hydrophilic and hydrophobic moieties in the precursor self-assembled on mold surfaces with matching surface energy, i.e., hydrophilic moieties self-assembled on pillars, resulting in hydrophilic replica surfaces in the wells, and hydrophobic moieties self-assembled on the Teflon substrate, resulting in a hydrophobic top surface of the replicas. We performed experiments in which we allowed incubation of the precursor in the setup for up to 60 min, while shielding from UV light, to allow the hydrophilic and hydrophobic moieties to diffuse to surfaces of the mold with matching surface energies. Thereafter, the precursor was cured for 15 s at 12.5 mW/cm2. After curing, we separated the mold halves using a custom demolding fixture consisting of four ejection pins and removed the replica from the mold using tweezers.

Yatsushiro, S. et al. Application of a cell microarray chip system for accurate, highly sensitive, and rapid diagnosis for malaria in uganda. Sci. Rep. 6, 30136 (2016).

Mixed in among thought leaders from leading suppliers to injection molders and mold makers at the 2023 Molding and MoldMaking conferences will be molders and toolmakers themselves.

Madaan, N., Romriell, N., Tuscano, J., Schlaad, H. & Linford, M. R. Introduction of thiol moieties, including their thiol–ene reactions and air oxidation, onto polyelectrolyte multilayer substrates. J. Colloid Interface Sci. 459, 199–205 (2015).

The second mold half consists of the mold insert, i.e., a 0.5 mm thick fused silica mold, also sized 4.5 × 7.4 cm², strengthened with a 2 mm thick piece of borosilicate glass glued to its backside. The fused silica structuring is illustrated in Fig. 1a–e. We started from 0.5 mm thick 4″ fused silica wafers and performed the subsequent steps. We evaporated 250 nm of Cr. We deposited the adhesion promotor Hexamethyldisilazane from the gas phase, spin-coated positive tone photoresist (AZ4533, AZ Electronic materials, Germany), and performed photolithography (Mask aligner, Karl Suss, Germany) with 6 s of UV exposure. We developed the resist in CD-26 Developer (Dow, Rohm-Haas supplier, Germany) for 85 s, followed by hard baking at 115 °C for 120 s, and O2 plasma ashing for 4 min at 150 W. We etched the Cr in a Cr etchant consisting of acetic acid: 3.92% w/w, water: 74.73% w/w, and diammonium cerium(IV) nitrate: 21.35% w/w. We stripped the photoresist and dry etched the wafer with DRIE (STS ICP Multiplex Advanced Oxide Etch) using H2, He and C4F8. We silanized and then teflonized the wafers, in which the silanization acts as an adhesion promoter for the subsequent TeflonTM coating on the fused silica. We prepared a hydrophobic fluoroalkylsilane solution consisting of silane (Dynasylan F8263, Evonik Resource Efficiency GmbH, Essen, Germany): 2% w/w, ethanol: 93% w/w, and water: 5% w/w and spin coated it on the substrate at 3000 rpm for 60 s. We baked the substrates at 110 °C for 12 min. We diluted Teflon AF 1601 (Chemours, USA) with fluorinert FC-40 (Sigma-Aldrich, Germany) with the ratio of 1:6, respectively. We spincoated the Teflon solution on the substrates at 2000 rpm for 60 s, followed by baking at 180 °C for 10 min. A lift-off process was subsequently performed in Cr etchant solution to remove Cr and Teflon from the pillar tops.

Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.

While the major correction in PP prices was finally underway, generally stable pricing was anticipated for the other four commodity resins.

Mike Sepe has authored more than 25 ANTEC papers and more than 250 articles illustrating the importance of this interdisciplanary approach. In this collection, we present some of his best work during the years he has been contributing for Plastics Technology Magazine.

Diaz-Quijada, G. A. et al. Surface modification of thermoplastics—towards the plastic biochip for high throughput screening devices. Lab Chip 7, 856–862 (2007).

Sandström, N., Shafagh, R. Z., Gylfason, K. B., Haraldsson, T. & van der Wijngaart, W. Batch fabrication of polymer microfluidic cartridges for qcm sensor packaging by direct bonding. J. Micromech. Microeng. 27, 124001 (2017).

Microstructured surfaces and microfluidic components are increasingly important for a diverse range of biological and clinical applications, e.g., in protein and cell studies1,2,3. Using polymers for such applications is often preferred over glass or silicon because of the soft material properties and the ease of device replication. Whereas micro-injection molding (IM) and micro-reaction injection molding (RIM) enable industrial-scale microstructuring of low-cost polymer materials4, the lack of a simple and straightforward approach for surface modification remains a limiting factor5. Microscale hydrophilic and hydrophobic patterning is commonly achieved via back-end processing techniques, e.g., plasma treatment, grafting and chemical coating6,7, which are multi-step, cumbersome, and subject to degradation over time8. Furthermore, surface modification of 3D patterns and control over surface topography remain unresolved challenges.

Here are processing guidelines aimed at both getting the PHA resin into the process without degrading it, and reducing residence time at melt temperatures.

Introduced by Zeiger and Spark Industries at the PTXPO, the nozzle is designed for maximum heat transfer and uniformity with a continuous taper for self cleaning.

Take a deep dive into all of the various aspects of part quoting to ensure you’ve got all the bases—as in costs—covered before preparing your customer’s quote for services.

The dimensions of the demonstrated microwells are tailored to host a single magnetic bead with 2.7 μm diameter. Not to undermine the true digital nature of the assay, wells containing more than one bead must be excluded from the signal count during the image analysis, and their number should therefore remain limited. For well arrays with 8.5 μm pitch, we estimate trapping two beads in as little as 2.1 ± 0.4% of the wells after single-step seeding, and in 7.1 ± 0.8% after multiple-step seeding (Fig. 3e).

Viewing with a ×40 objective allowed scanning a large area and distinguishing wells with and without beads, but did not allow distinguishing between wells with a single and those with multiple beads. At ×100 magnification it was feasible to distinguish between wells with zero, a single or two beads.

Second quarter started with price hikes in PE and the four volume engineering resins, but relatively stable pricing was largely expected by the quarter’s end.

Discover how artifical intelligence is revolutionizing plastics processing. Hear from industry experts on the future impact of AI on your operations and envision a fully interconnected plant.

Plastics Technology covers technical and business Information for Plastics Processors in Injection Molding, Extrusion, Blow Molding, Plastic Additives, Compounding, Plastic Materials, and Resin Pricing. About Us

a–e Schematic of the RIM replication using area-selective monomer self-assembly (g–k); and the resulting structures and surface energies (f, l–n). Blue color indicates hydrophilic surfaces; red color hydrophobic surfaces. a Fused silica substrate (blue) coated with Cr (gray) and photoresist (yellow). b Patterned Cr after photolithography and wet etching. c Fused silica pillars with Cr on top after dry etching. d Fused silica pillars with Cr and Teflon on top after Teflon (red) coating. e Finalized mold with hydrophilic pillar arrays in hydrophobic background after Cr lift-off. f Perspective SEM image of a mold insert with 3.5 μm diameter micropillars. g Mold assembly and precursor injection. h The area-selective self-assembly of monomers on mold surfaces with corresponding surface energy. i UV-curing. j Replica demolding. k Detail of HIH wells in the replica. l Top view SEM image of replicated HIH wells with 3.5 μm diameter and 8.5 μm pitch. m, n Contact angle measurements on corresponding hydrophobic and hydrophilic surfaces of non-structured polymer parts after 60 min incubation time

The aim of this presentation is to guide you through the factors and the numbers that will help you determine if a robot is a smart investment for your application. Agenda:  Why are you considering automation? What problems are you trying to solve? How and why automation can help Crunch the numbers and determine the ROI

The two mold halves are held together using an Al molding fixture that is 9 mm thick at its base, with sidewalls to align the mold halves. A pair of toggle clamps applies pressure to the mold from above. We attached silicone tubing with an ID of 1.5 mm and OD of 5 mm to the inlet and outlet channels of the mold. Two inlet and outlet ports, embedded into both sides of the Al mold body, enable injection and ventilation prior and during RIM experiment. We initially connected the outlet port to an in-house vacuum source (20 mbar) for degassing the mold cavity and avoiding air entrapment during RIM.

We purchased streptavidin-coated LodeStar 2.7 μm superparamagnetic beads with a stock concentration of 8 × 108 beads/mL from Agilent Technologies (Santa Clara, CA, USA). To prepare the beads for seeding, 10 µL of the stock solution was washed three times in 150 μL of a mixture of phosphate-buffered saline (PBS), 0.1% bovine serum albumin, and 0.1% Tween-20. The beads were resuspended in 80 μL PBS containing 2% Tween-20. For multiple seeding events, we pipetted a 5 μL drop of this solution on the microwell array, and a plastic pipette tip was used to move the droplet back and forth across the array 30 times while a magnet was held underneath the array to attract the beads into the wells. After the 30 seeding events, we removed the magnet and pushed the droplet off of the array. In the case of a single seeding event, we moved the droplet across the array only once. We visualized the beads using an inverted fluorescence microscope in bright field mode (Nikon TiEclipse, Japan) and counted for five different samples.

This month’s resin pricing report includes PT’s quarterly check-in on select engineering resins, including nylon 6 and 66.

Researchers from Sweden and Belgium have developed a simplified technique to create microfluidic devices with patterns of modified surface properties. Microfluidic devices, such as the one demonstrated here by a team led by Wouter van der Wijngaart, from KTH Royal Institute of Technology, Sweden, utilize polymer microstructures with hydrophobic and hydrophilic properties to manipulate fluids on a tiny scale. This enables ‘lab-on-a-chip’ experiments with a diverse array of applications. However, current devices suffer from complicated fabrication processes and a limited lifespan. van der Wijngaart and his team used the polymer ‘off-stoichiometric thiol-ene’ to merge a rapid replication technique called reaction injection molding with a method to self-assemble hydrophobic and hydrophilic micropatterns in a single, rapid fabrication step. The researchers hope that their results will form the basis for future microfluidic chip manufacturing and lead to the creation of ultrasensitive life science research tools.

Machado, T. O., Sayer, C. & Araujo, P. H. H. Thiol-ene polymerisation: a promising technique to obtain novel biomaterials. Eur. Polym. J. 86, 200–215 (2017).

Extrusion simulations can be useful in anticipating issues and running “what-if” scenarios to size extruders and design dies for extrusion projects. It should be used at early stages of any project to avoid trial and error and remaking tooling.

Ultradent's entry of its Umbrella cheek retractor took home the awards for Technical Sophistication and Achievement in Economics and Efficiency at PTXPO.

Thiol-ene alternating copolymer constitutes an important class of thermosetting materials with a broad range of applications in optics, electronics, and biomedicine19,20. The UV polymerization and click reaction in these polymer networks enable rapid, efficient and by-product free reaction with often no need of solvent use. Also, the delayed gelation in thiol-ene polymerization leads to low shrinkage and low residual stress and enhances replication precision during molding21. Off-stoichiometric thiol-ene (OSTE) imparts additional features such as natively reactive surfaces, which offers a diverse spectrum of applications including adhesive-free bonding22,23 or direct binding of biomolecules24. Hydrophilic and hydrophobic moieties within an OSTE polymer precursor spontaneously self-assemble on areas of a master surface that have matching surface energies25. Sandström et al.26 reported micro-RIM of off-stoichiometric thiol-ene epoxy thermosetting polymers as a rapid processing technique that results in high-replication fidelity and low-residual stress.

Shiu, J.-Y., Aires, L., Lin, Z. & Vogel, V. Nanopillar force measurements reveal actin-cap-mediated yap mechanotransduction. Nat. Cell Biol. 20, 262 (2018).

Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.

August 29-30 in Minneapolis all things injection molding and moldmaking will be happening at the Hyatt Regency — check out who’s speaking on what topics today.

Formnext Chicago is an industrial additive manufacturing expo taking place April 8-10, 2025 at McCormick Place in Chicago, Illinois. Formnext Chicago is the second in a series of Formnext events in the U.S. being produced by Mesago Messe Frankfurt, AMT – The Association For Manufacturing Technology, and Gardner Business Media (our publisher).

While prices moved up for three of the five commodity resins, there was potential for a flat trajectory for the rest of the third quarter.

The funded project will accelerate the commercialization of a material verified by the University of Georgia as a truly biodegradable alternative to traditional petrochemical plastic. To carry out the work, Danimer Scientific will work closely with research teams at the National Renewable Energy Laboratory in Golden, Colo. and Pacific Northwest National Laboratory in Richland, Wash. With access to state-of-the-art facilities and expertise provided by the DOE program, Danimer Scientific will produce tunable combinations of PHA with different chain lengths, enabling the creation of new biodegradable plastics for a greater range of applications.

Zandi Shafagh, R., Decrop, D., Ven, K. et al. Reaction injection molding of hydrophilic-in-hydrophobic femtolitre-well arrays. Microsyst Nanoeng 5, 25 (2019). https://doi.org/10.1038/s41378-019-0065-2

technotrans says climate protection, energy efficiency and customization will be key discussion topics at PTXPO as it displays its protemp flow 6 ultrasonic eco and the teco cs 90t 9.1 TCUs.

Dressler, O. J., Solvas, X. Ci & deMello, A. J. Chemical and biological dynamics using droplet-based microfluidics. Annu. Rev. Anal. Chem. 10, 1–24 (2017).

Join this webinar to explore the transformative benefits of retrofitting your existing injection molding machines (IMMs). Engel will guide you through upgrading your equipment to enhance monitoring, control and adaptability — all while integrating digital technologies. You'll learn about the latest trends in IMM retrofitting (including Euromap interfaces and plasticizing retrofits) and discover how to future-proof your machines for a competitive edge. With insights from industry experts, it'll walk you through the decision-making process, ensuring you make informed choices that drive your business forward. Agenda: Maximize the value of your current IMMs through strategic retrofitting Learn how to integrate digital technologies to enhance monitoring and control Explore the benefits of Euromap interfaces and plasticizing retrofits Understand how retrofitting can help meet new product demands and improve adaptability Discover how Engel can support your retrofitting needs, from free consultations to execution

In this collection, which is part one of a series representing some of John’s finest work, we present you with five articles that we think you will refer to time and again as you look to solve problems, cut cycle times and improve the quality of the parts you mold.

Multiple speakers at Molding 2023 will address the ways simulation can impact material substitution decisions, process profitability and simplification of mold design.

Mold maintenance is critical, and with this collection of content we’ve bundled some of the very best advice we’ve published on repairing, maintaining, evaluating and even hanging molds on injection molding machines.

Rastogi, A., Paik, M. Y., Tanaka, M. & Ober, C. K. Direct patterning of intrinsically electron beam sensitive polymer brushes. ACS Nano 4, 771–780 (2010).

In conclusion, this work introduces reaction injection molding as a scalable platform suitable for use both in high-throughput and cost-effective manufacturing and in laboratory settings. We demonstrate the technique for the replication of microwell arrays. The distinct feature of simultaneous molding and surface energy patterning results in the structuring of hydrophilic-in-hydrophobic femtolitre well arrays capable of magnetic bead seeding with efficiencies of 75.1% and 87.2% for single-cycle and multiple-cycle seeding, respectively. This technology can pave the road towards successful commercialization of digital-based bioassays, specifically, and is amenable to diverse adaptations in medical devices and life science tools, where the spatial control of surface topology and properties is critical.

Learn about sustainable scrap reprocessing—this resource offers a deep dive into everything from granulator types and options, to service tips, videos and technical articles.