Europe - injection molds for sale

This injection molding machine also includes a precision-ground shaft that goes into the heated chamber’s long hole once the plastic pellets are sufficiently heated. It fits tight enough to move all the plastic through the machine and out the far end.

A pair of 2-in. pneumatic cylinders with a crossbar between them pulls the shaft down. The pneumatic cylinders create a 120-PSI pressure and force of more than 3,000 newtons. However, the second iteration will have 4-in. cylinders, making it more forceful.

While the major correction in PP prices was finally underway, generally stable pricing was anticipated for the other four commodity resins.

The top of the tube mounts onto the machine with steel spacers that reduce the heat-transfer contact area. The nozzle threads into the heated tube with tapered pipe threads, preventing liquefied plastic from leaking. The creators decided against using gaskets. That makes it much easier to replace the nozzle or switch it out with a different size.

Formnext Chicago is an industrial additive manufacturing expo taking place April 8-10, 2025 at McCormick Place in Chicago, Illinois. Formnext Chicago is the second in a series of Formnext events in the U.S. being produced by Mesago Messe Frankfurt, AMT – The Association For Manufacturing Technology, and Gardner Business Media (our publisher).

Join KraussMaffei for an insightful webinar designed for industry professionals, engineers and anyone interested in the manufacturing processes of PVC pipes. This session will provide a comprehensive understanding of the technology behind the production of high-quality PVC pipes: from raw material preparation to final product testing. Agenda: Introduction to PVC extrusion: overview of the basic principles of PVC pipe extrusion — including the process of melting and shaping PVC resin into pipe forms Equipment and machinery: detailed explanation of the key equipment involved — such as extruders, dies and cooling systems — and their roles in the extrusion process Process parameters: insight into the critical process parameters like temperature, pressure and cooling rates that influence the quality and consistency of the final PVC pipes Energy efficiency: examination of ways to save material and energy use when extruding PVC pipe products

In this three-part collection, veteran molder and moldmaker Jim Fattori brings to bear his 40+ years of on-the-job experience and provides molders his “from the trenches” perspective on on the why, where and how of venting injection molds. Take the trial-and-error out of the molding venting process.

Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.

If you want to make the injection molding machine described here, you can buy the INJEKTO 2.0 kit, which features all the improvements the brothers intended to make during a second iteration. They designed it to work with 3D-printed molds, as well as those made with a CNC machine.

Ultradent's entry of its Umbrella cheek retractor took home the awards for Technical Sophistication and Achievement in Economics and Efficiency at PTXPO.

Successfully starting or restarting an injection molding machine is less about ticking boxes on a rote checklist and more about individually assessing each processing scenario and its unique variables.

The team made the heated injection chamber by turning a piece of aluminum round stock on a lathe to get its cylindrical shape. They decided the second prototype would use steel instead of aluminum, making the machine more durable.

This Knowledge Center provides an overview of the considerations needed to understand the purchase, operation, and maintenance of a process cooling system.

The Plastics Industry Association (PLASTICS) has released final figures for NPE2024: The Plastics Show (May 6-10; Orlando) that officially make it the largest ever NPE in several key metrics.

Say “manufacturing automation” and thoughts immediately go to the shop floor and specialized production equipment, robotics and material handling systems. But there is another realm of possible automation — the front office.

NPE2024: Absolute Haitian says Generation 5 of the servo-hydraulic Haitian and electric Zhafir machines lines emphasize efficiency, performance and intelligence.

Processors with sustainability goals or mandates have a number of ways to reach their goals. Biopolymers are among them.

Emily Newton is a technology and industrial journalist. She is also the editor in chief of Revolutionized. She has over five years covering stories about warehousing, logistics and distribution.

Having already invested upward of $70,000 on tooling for the two-cavity LSR overmolding tool, Amerimold Tech needed to find a prompt and efficient solution to avoid incurring even more costs for pretreatment, rejects, and waste. Company president Michael Schon contacted Shin-Etsu Silicones to ship overnight a 5-gal sample pail of its KE2090-40 Select-Hesive LIMS product for a test run in the LSR mold.

The designers encountered a challenge while figuring out how to keep the injection chamber’s tube secure and in the right position without too much heat loss. They tackled it by using four round screws positioned around the perimeter of the chamber’s pipe, virtually eliminating surface-area contact. This approach made the pipe stable during the side-to-side operational movement, and it loses minimal heat by conduction to the frame.

Emily Newton is a technology and industrial journalist. She is also the editor-in-chief of Revolutionized. She has more than five years of experience covering warehousing, logistics and distribution.

A collaboration between show organizer PLASTICS, recycler CPR and size reduction experts WEIMA and Conair recovered and recycled all production scrap at NPE2024.

Hard/soft overmolding has become a fundamental technique for injection molders in recent years, and a growing number of molders are extending that technology thermoset/thermoplastic combinations. In some applications, liquid silicone rubber (LSR) offers advantages over TPEs in its heat resistance, extreme low-temperature flexibility, chemical resistance, and inherent lubricity. While good long-term adhesion can be an issue in overmolding TPEs onto rigid thermoplastic substrates, the challenge is even greater with LSR on thermoplastics.

Core Technology Molding turned to Mold-Masters E-Multi auxiliary injection unit to help it win a job and dramatically change its process.

However, you might also decide you have enough ideas—between your knowledge and what’s covered above—to make a design that improves upon what’s here and is better suited to your needs. In any case, knowing what others have tried when building injection molding machines is always helpful.

When, how, what and why to automate — leading robotics suppliers and forward-thinking moldmakers will share their insights on automating manufacturing at collocated event.

Resin drying is a crucial, but often-misunderstood area. This collection includes details on why and what you need to dry, how to specify a dryer, and best practices.

Next, they pressed the injection button and kept it depressed for a few seconds longer than necessary, giving the plastic time to start cooling and hardening. Waiting like that prevents the plastic from flowing back out.

While prices moved up for three of the five commodity resins, there was potential for a flat trajectory for the rest of the third quarter.

While prices moved up for three of the five commodity resins, there was potential for a flat trajectory for the rest of the third quarter.

Additive technology creates air pockets in film during orientation, cutting down on the amount of resin needed while boosting opacity, mechanical properties and recyclability.

Introduced by Zeiger and Spark Industries at the PTXPO, the nozzle is designed for maximum heat transfer and uniformity with a continuous taper for self cleaning.

However, the brothers admitted a problem with having only one thermocouple in their design. They knew it would be better to spread them throughout the build and aimed to do that with their next iteration.

Heater bands wrap around the injector chamber’s tubed shape, and a silica sleeve promotes warmth retention. The design also includes a large fan that circulates air from one vent placed on the opposite side of—and slightly above—the fan. That design decision distributes air across all the aluminum surfaces to cool them quickly.

In this collection of content, we provide expert advice on welding from some of the leading authorities in the field, with tips on such matters as controls, as well as insights on how to solve common problems in welding.

•Serve it up hot. “It is vital for substrate parts to be hot,” Bishop states. “The bonding of LSR to the thermoplastic is a chemical reaction. It needs a combination of time, temperature, and pressure. In general, he says, hotter is better. Typical mold temperatures for LSR are 300 to 400 F and the minimum is 250 F. The LSR has to achieve at least that internal temperature to cure adequately. Hotter is also faster—meaning shorter cure cycles.

The creators focused on user-friendliness in the design. Two main components that make the machine work are an air compressor and a standard electrical socket, making it easy to use almost anywhere.

With advocacy, communication and sustainability as three main pillars, Seaholm leads a trade association to NPE that ‘is more active today than we have ever been.’

The aim of this presentation is to guide you through the factors and the numbers that will help you determine if a robot is a smart investment for your application. Agenda:  Why are you considering automation? What problems are you trying to solve? How and why automation can help Crunch the numbers and determine the ROI

In this collection, which is part one of a series representing some of John’s finest work, we present you with five articles that we think you will refer to time and again as you look to solve problems, cut cycle times and improve the quality of the parts you mold.

The injection chamber’s tube also has springs on the bottom, helping the nozzle enter the mold opening with enough force to keep it mated while the injection occurs. The creators pointed out that if they design future models with larger hydraulic cylinders, they’ll probably also need to increase the spring size to maintain the desired contact.

•Do a preliminary test. To get a good idea of how well your substrate material will bond to a particular LSR grade, it’s a good idea to send a representative part or sample plaque of the substrate material to the LSR supplier for testing.

Preparing the substrate surface with chemical primers or plasma or UV treatment has been one approach to the adhesion challenge. To minimize processing steps, LSR suppliers have come out with newer “primerless” or “self-adhesive” grades that bond well on their own with thermoplastics (see accompanying case history). Even so, there are some rules to observe in order to obtain good results. Here are some key points of advice offered by Eric Bishop, North American marketing manager for Shin-Etsu Silicones of America, Inc. in Akron, Ohio (shinetsusilicones.com). Shin-Etsu supplies Select-Hesive LIMS for primerless adhesion to thermoplastics.

The machine’s creators were also curious about how much plastic it could hold, so they filled the injection tube, extruded all the material out and placed the contents on a scale. The results showed the machine contained 27.6 grams—more than sufficient for home projects.

Multiple speakers at Molding 2023 will address the ways simulation can impact material substitution decisions, process profitability and simplification of mold design.

The Korean maker of injection molding machines featured eight machines in its nearly 14,000-square-foot booth with additional presses at Yushin and Incoe’s booths, as it targets 20% market share.

Mike Sepe has authored more than 25 ANTEC papers and more than 250 articles illustrating the importance of this interdisciplanary approach. In this collection, we present some of his best work during the years he has been contributing for Plastics Technology Magazine.

The creators filled the injection tube with plastic, then inserted their mold. After pushing the mold upward, they placed a spacer below it to maintain contact with the nozzle. However, the creators also suggested elevating the mold on a scissor lift, provided both components are small enough to fit under the machine’s nozzle.

The silica sleeve around the tube inhibits some of its heat loss but lets the component cool slightly. That gives the machine’s temperature controller more authority over the tube’s temperature since the design allows heating and cooling to occur rapidly. Otherwise, the heater bands would overheat the injection chamber’s tube, burning the plastic inside the machine and producing flawed pieces.

Plastics Technology’s Tech Days is back! Every Tuesday in October, a series of five online presentations will be given by industry supplier around the following topics:  Injection Molding — New Technologies, Efficiencies Film Extrusion — New Technologies, Efficiencies Upstream/Downstream Operations Injection Molding — Sustainability Extrusion — Compounding Coming out of NPE2024, PT identified a variety of topics, technologies and trends that are driving and shaping the evolution of plastic products manufacturing — from recycling/recyclability and energy optimization to AI-based process control and automation implementation. PT Tech Days is designed to provide a robust, curated, accessible platform through which plastics professionals can explore these trends, have direct access to subject-matter experts and develop strategies for applying solutions in their operations.

They plugged the air compressor into the back while waiting for the machine to get hot enough. Doing that forced the side cylinders up, putting the injection ram in the right position for pressing hot plastic into the mold.

Second quarter started with price hikes in PE and the four volume engineering resins, but relatively stable pricing was largely expected by the quarter’s end.

This month’s resin pricing report includes PT’s quarterly check-in on select engineering resins, including nylon 6 and 66.

A handful of test shots were molded with Select-Hesive self-bonding material without any pretreatment. According to Schon, “Incredibly, the sample run was successful on the first shot, creating a perfect bond with no UV light treatment required—and more importantly, no rejects.” After passing additional tests, the client gave the go-ahead for a 25,000-piece initial run. Because of the time savings due to the absence of rejects, that initial run was expanded beyond the 10,000 parts initially scheduled.

Sustainability continues to dominate new additives technology, but upping performance is also evident. Most of the new additives have been targeted to commodity resins and particularly polyolefins.

In this collection of articles, two of the industry’s foremost authorities on screw design — Jim Frankand and Mark Spalding — offer their sage advice on screw design...what works, what doesn’t, and what to look for when things start going wrong.

In contrast, releasing the pressure on the injection button pushes the air through the tubes to the cylinders’ bottoms. Then, the air presses on the bottom of the syringe plungers, raising the injection ram. The injection ram goes up once someone releases the button and serves as a safety feature if the press needs to be stopped because something’s blocking the ram.

If the controller senses the temperature is not high enough, it opens the solid-state relay switch, which channels the current to the heating elements and activates them. A K-type thermocouple mounted above the nozzle measures the temperature.

The pipe and fittings manufacturer’s new 200,000-square-foot facility represents a $200 million investment and will create 150 jobs.

Learn about sustainable scrap reprocessing—this resource offers a deep dive into everything from granulator types and options, to service tips, videos and technical articles.

One of the brackets also serves as a shelf for the metal bar pulled down with pneumatic cylinders during the machine’s operation. The brothers decided putting the bracket there would increase tolerance to the resultant high stresses.

Even though the YouTube channel only appeared on June 14, 2021, some of the videos have several million views. All the Action BOX content aims to show people how to do and build things, encouraging them to have ideas in the process.

The creators begin by plugging the machine into a 110-volt power supply and giving it a couple of minutes to reach the required temperature. The display on the front of the device indicates when the temp is correct. The team used acrylonitrile butadiene styrene (ABS) plastic, so they knew the right nozzle temperature was approximately 220°C.

Engineers typically use reverse engineering to rebuild or improve upon old designs when trying to see how a product works and recreate it without blueprints. However, you don’t have to do that here because the video about making the INJEKTO shows the creators taking the machine apart and showing what’s inside.

•Watch out for additives, mold releases. Bishop advises against usin thermoplastic substrates with internal mold releases or “self-lubricating” additives, though they do not always create an adhesion problem. External mold releases are a definite no-no. And avoid any additives containing sulfur or amines, which inhibit cure of LSR. That means amine-based antistats can be a problem.

In a time where sustainability is no longer just a buzzword, the food and beverage packaging industry is required to be at the forefront of this innovation. By adopting circular packaging processes and solutions, producers can meet regulatory requirements while also satisfying consumer demand and enhancing brand reputation. Join Husky to learn more about the broader implications of the circular economy — as well as how leading brands are leveraging this opportunity to reduce costs, increase design flexibility and boost product differentiation. Agenda: The cost and operational benefits of embracing circularity Key materials in circular packaging — including rPET and emerging bioplastics How to design a circular food and beverage package Strategies for selecting sustainable closures to future-proof packaging solutions Optimization and streamlining of production processes for enhanced efficiency How Husky Technologies can enable your sustainable success

The molds were created on a CNC machine. However, you can also explore other options, such as using a 3D printer to make what’s needed for your project.

The design of the molds used in this manufacturing process plays a substantial role in determining whether the resulting products will function as intended. The same is true when making an injection molding machine. The design is critical for the machine’s overall functionality and performance. That’s why the Action BOX team used computer-aided design (CAD) software to flesh out the build’s specifics before making the physical version.

•Keep it clean. “Cleanliness is critical to adhesion, so keep the substrate clean and dry,” says Bishop. That is less of an issue if the substrates are molded in a two-shot mold with the LSR, rather than molded separately and transferred from one machine to another.

Across all process types, sustainability was a big theme at NPE2024. But there was plenty to see in automation and artificial intelligence as well.

Last year, Amerimold Tech Inc. was facing serious cost and time overruns if it could not solve an overmolding adhesion problem. The Marlboro, N.J., custom injection molder was producing a thermal controller housing for a leading manufacturer. The chassis, front cover, and keypad were molded in polycarbonate, and then the keypad was overmolded with LSR in a second tool and press. Amerimold’s client had an existing loyalty to a particular material supplier, whose self-bonding LSR material was already specified for the project. However, the material’s adhesion to PC was insufficient without pretreatment. The client had tried having the parts overmolded in Asia. But testing of initial samples produced a 60% scrap rate due to inadequate adhesion of the self-bonding LSR to the PC keypad.

•Mechanical interlock helps. Even with self-bonding LSR, it’s good insurance to incorporate some form of mechanical interlock between the materials into the part design. Allowing LSR to penetrate through-holes onto the back side of the part is a good example. A rough finish on the overmolding interface area can help, but isn’t required with a good self-bonding material.

Injection molding works by pressing liquid plastic into a shaped mold. The injection chamber has a tapered top to help funnel the plastic pellets into the inlet. A second iteration of the injection chamber’s top includes a funnel extension accommodating more pellets.

Mold maintenance is critical, and with this collection of content we’ve bundled some of the very best advice we’ve published on repairing, maintaining, evaluating and even hanging molds on injection molding machines.

Join this webinar to explore the transformative benefits of retrofitting your existing injection molding machines (IMMs). Engel will guide you through upgrading your equipment to enhance monitoring, control and adaptability — all while integrating digital technologies. You'll learn about the latest trends in IMM retrofitting (including Euromap interfaces and plasticizing retrofits) and discover how to future-proof your machines for a competitive edge. With insights from industry experts, it'll walk you through the decision-making process, ensuring you make informed choices that drive your business forward. Agenda: Maximize the value of your current IMMs through strategic retrofitting Learn how to integrate digital technologies to enhance monitoring and control Explore the benefits of Euromap interfaces and plasticizing retrofits Understand how retrofitting can help meet new product demands and improve adaptability Discover how Engel can support your retrofitting needs, from free consultations to execution

Gifted with extraordinary technical know how and an authoritative yet plain English writing style, in this collection of articles Fattori offers his insights on a variety of molding-related topics that are bound to make your days on the production floor go a little bit better.

While the melting process does not provide perfect mixing, this study shows that mixing is indeed initiated during melting.

Each of the machine’s pneumatic cylinders contains a plunger that functions like a syringe. Air forced down from the top pushes on the internal surfaces, making the whole shaft and injection ram move downward.

The machine’s front cover stays in place with four screws. The air system works when a compressor’s tube is fed into a through-wall quick connect, moving the air into an electrical solenoid. All connections to the solenoid occur via T-adapters. The team used elbow brackets to create all links to the pneumatic cylinders.

During the design process for the machine’s frame, the pair recognized that they could have welded the parts together or made them slot into each other to create support. However, simplicity was the goal, especially because they knew some people who build this product might not have machine shop access. The design includes well-placed brackets to hold everything together.

•Consistency counts. If you follow all the advice above, you should get good results with self-adhesive LSR regardless of whether you use two-shot molding in one machine or separate molding in two machines. But with two machines, it definitely helps to use automated (robotic) transfer from one to the other, Bishop says. That way ensures a consistent substrate temperature for overmolding and also avoids any contamination from a human operator handling parts.

Hard/soft overmolding has become a fundamental technique for injection molders in recent years, and a growing number of molders are extending that technology thermoset/thermoplastic combinations.

Join Engel in exploring the future of battery molding technology. Discover advancements in thermoplastic composites for battery housings, innovative automation solutions and the latest in large-tonnage equipment designed for e-mobility — all with a focus on cost-efficient solutions. Agenda: Learn about cutting-edge thermoplastic composites for durable, sustainable and cost-efficient battery housings Explore advanced automation concepts for efficient and scalable production See the latest large-tonnage equipment and technology innovations for e-mobility solutions

The machine’s back has a standard, three-prong power cord outlet. The main switch is directly above where the cord plugs into the back. The team ground the electrical connection to the injection molder’s all-metal frame with a yellow wire and the phase is split among four loads.

You also don’t want to overmold LSR onto a cold substrate, which will slow curing, Bishop cautions. In two-shot overmolding that’s not a problem—residual heat in the thermoplastic part will help cure the LSR. But if the substrate is molded separately, it may need preheating in a conveyor oven or with a hot plate.

The KE2090 Select-Hesive LIMS silicone comes in 10 to 70 Shore A hardness. It bonds to PC, PBT, PPO alloys, PEEK, and polyphenylsulfone, according to Shin-Etsu’s Eric Bishop.

Take a deep dive into all of the various aspects of part quoting to ensure you’ve got all the bases—as in costs—covered before preparing your customer’s quote for services.

Across the show, sustainability ruled in new materials technology, from polyolefins and engineering resins to biobased materials.

The first wire sends power to the main injection button, which connects and disconnects the phase before the current is routed back to the solenoid. The next wire goes to a junction block that causes the fan to start once someone turns on the machine. A third wire goes to the main proportional-integral-derivative (PID) temperature controller. Finally, a fourth wire connects to a solid-state relay, the machine’s main switch electronically activated by the temperature controller.

Join Wittmann for an engaging webinar on the transformative impact of manufacturing execution systems (MES) in the plastic injection molding industry. Discover how MES enhances production efficiency, quality control and real-time monitoring while also reducing downtime. It will explore the integration of MES with existing systems, emphasizing compliance and traceability for automotive and medical sectors. Learn about the latest advancements in IoT and AI technologies and how they drive innovation and continuous improvement in MES. Agenda: Overview of MES benefits What is MES? Definition, role and brief history Historical perspective and evolution Longevity and analytics Connectivity: importance, standards and integration Advantages of MES: efficiency, real-time data, traceability and cost savings Emerging technologies: IoT and AI in MES

Implementing a production monitoring system as the foundation of a ‘smart factory’ is about integrating people with new technology as much as it is about integrating machines and computers. Here are tips from a company that has gone through the process.

Many people don’t realize that an injection molding machine is something they can build themselves, even without a machine shop or other extensive setup. The hosts of the Canadian YouTube channel Action BOX—known to viewers as brothers Alan and Dave—described in one of their videos how they created a desktop injection molder called the INJEKTO.

Despite price increase nominations going into second quarter, it appeared there was potential for generally flat pricing with the exception of a major downward correction for PP.

After successfully introducing a combined conference for moldmakers and injection molders in 2022, Plastics Technology and MoldMaking Technology are once again joining forces for a tooling/molding two-for-one.

Mixed in among thought leaders from leading suppliers to injection molders and mold makers at the 2023 Molding and MoldMaking conferences will be molders and toolmakers themselves.

The solenoid gets 110 volts of electricity when someone turns the machine’s injection button on. The electrical flow allows air to travel through tubes snaking around to near the top of the frame. Those tubes push the air to the top of the injection cylinder.

August 29-30 in Minneapolis all things injection molding and moldmaking will be happening at the Hyatt Regency — check out who’s speaking on what topics today.

technotrans says climate protection, energy efficiency and customization will be key discussion topics at PTXPO as it displays its protemp flow 6 ultrasonic eco and the teco cs 90t 9.1 TCUs.

An alternative solution would have required Amerimold Tech to spend $17,000 for variable-frequency light-pumping (VFLP) equipment to UV pretreat the PC surface prior to overmolding. VFLP was tested and provided some improvement but it still failed.

Discover how artifical intelligence is revolutionizing plastics processing. Hear from industry experts on the future impact of AI on your operations and envision a fully interconnected plant.

Plastics Technology covers technical and business Information for Plastics Processors in Injection Molding, Extrusion, Blow Molding, Plastic Additives, Compounding, Plastic Materials, and Resin Pricing. About Us

•Demold gently. Even though LSRs have good “green strength” right out of the mold, when the mold opens, adhesion and curing may not have achieved their final state. So avoid pulling or stretching the LSR during demolding. Bishop notes that a PTFE mold coating can help with release of the LSR.

Much of the machine’s body consists of a 3-in. aluminum flat bar. The creators chose it because they deemed it one of the least expensive and most readily available types of raw aluminum to source. However, your decision may vary depending on your budget and how you plan to use the injection press.

Exhibitors and presenters at the plastics show emphasized 3D printing as a complement and aid to more traditional production processes.