Join this webinar to explore the transformative benefits of retrofitting your existing injection molding machines (IMMs). Engel will guide you through upgrading your equipment to enhance monitoring, control and adaptability — all while integrating digital technologies. You'll learn about the latest trends in IMM retrofitting (including Euromap interfaces and plasticizing retrofits) and discover how to future-proof your machines for a competitive edge. With insights from industry experts, it'll walk you through the decision-making process, ensuring you make informed choices that drive your business forward. Agenda: Maximize the value of your current IMMs through strategic retrofitting Learn how to integrate digital technologies to enhance monitoring and control Explore the benefits of Euromap interfaces and plasticizing retrofits Understand how retrofitting can help meet new product demands and improve adaptability Discover how Engel can support your retrofitting needs, from free consultations to execution

Mixed in among thought leaders from leading suppliers to injection molders and mold makers at the 2023 Molding and MoldMaking conferences will be molders and toolmakers themselves.

Structural foam is a niche, and will remain so—Ernsberger and Uniloy’s Hunerberg agree on that. Although it competes with solid injection molding for larger, heavier parts, structural foam enjoys several advantages. “I can do on a 500-ton press what an injection molder needs 2500 tons to do,” says Ernsberger. “You can’t mold four pallets at once by injection molding”—not without a mammoth machine. He routinely runs parts weighing 9 to 15 lb, and one job is 168 lb. His largest press has 200-lb shot capacity and platens 162 in. wide x 107 in. high. One job involves molding 16 eight-ft-long parts in a single mold.

Both MacroPower and SmartPower injection molding machines from WITTMANN are being used to produce headlights, rear lights, reflectors, lenses and light guides for the business segment of Automotive Lighting.

ROBOTS: THE NEW NECESSITY Some of that improved productivity is due to the arrival of robots, says Ernsberger. Starting in 2003, 20/20 was an early adopter of robots for structural foam. “Before then, I never thought robots would be a help rather than a hindrance—something that would slow you down on mold changes and setups. I didn’t want to mess with them. But then Ranger Automation Systems (Shrewsbury, Mass.) came in with the biggest robot they had ever built and asked us to try it out for free. Now we have Ranger robots on all our machines, and the two biggest (1000 and 1500 tons) have two robots on the same beam to handle multiple molds.” The robots can carry 280 lb.

As Ramos explained, injection moulding of glove boxes and their lids places extremely high demands on precision and surface quality: “These two parts are joined together by vibration welding. To get a good weld seam, their geometries must be perfectly matched.” In this case, “good” does not just mean that the weld seam looks clean, but above all that it lasts for a long time, even when the vehicle achieves a long service life and is subjected to vibrations caused by rough roads.

Hunerberg says 20/20 is the first structural-foam molder he knows of that put robots on all its machines. He says robots have caught on with captive structural-foam molders but estimates that robots are used by only half of custom foam molders, which have shorter runs and frequent mold changes.

To collect even more specific data in future and to be able to evaluate these more easily, the Group is currently installing software solutions from WITTMANN Digital, such as the TEMI+ MES. The automobile industry drives its suppliers at high speed towards CO2 neutrality. With Toyota, for example, Mueller has signed a joint commitment to that effect. The individual actions to be taken go beyond injection moulding production. For instance, transport packaging for both moulded parts and raw materials is being minimised more and more and re-used wherever possible. Milk run optimisation is also underway.

Ernsberger and Hunerberg also agree that, in some respects, structural foam is easier to run than solid injection molding. “It’s a very forgiving process,” says Ernsberger. “You run a black foam fan shroud and it’s a lot less trouble than a crystal-clear polycarbonate part.” He notes that “the old structural-foam swirl” is not so evident on today’s parts, but adds that “we don’t do high-finish applications.” He leaves that to other foam molders that specialize in techniques like gas counterpressure.

“In this way, more machines fit into the hall,” Ramos concluded. “Here we are not in an industrial zone, but in the middle of a city, where industrial properties are very expensive. Compact machines and production cells mean that we can continue to grow for quite a while without having to extend our building.”

What he wants from the machinery suppliers today is higher output. “What any foam molder wants is more lb/hr. We started with 115-hp extruders; in ’93 we went to 400 hp and I thought that’s all I would ever need. We have 600 hp today and that’s not enough.

technotrans says climate protection, energy efficiency and customization will be key discussion topics at PTXPO as it displays its protemp flow 6 ultrasonic eco and the teco cs 90t 9.1 TCUs.

The aim of this presentation is to guide you through the factors and the numbers that will help you determine if a robot is a smart investment for your application. Agenda:  Why are you considering automation? What problems are you trying to solve? How and why automation can help Crunch the numbers and determine the ROI

A total of 54 injection moulding machines are standing on the production floor of Mueller and Tecnoplast in São Paulo. Most of these have come from WITTMANN, or WITTMANN BATTENFELD, as the WITTMANN Group’s injection moulding machine division was called until recently. As an overall system supplier, at Mueller/Tecnoplast, WITTMANN is responsible for the entire equipment, including injection moulding machines as well as automation and auxiliaries, ranging from granulate feeding devices right up to granulators for in-line grinding and recycling of sprue.

That has not been a deterrent to 20/20, says Ernsberger. “For us, a long run is two or three days. We make three mold changes a day.” He says that takes from 4 hr for small parts to two days for the largest (168-lb) job. “We have it down to a science.” One key is that 20/20 has standardized its mold shut heights to simplify changeovers.

When, how, what and why to automate — leading robotics suppliers and forward-thinking moldmakers will share their insights on automating manufacturing at collocated event.

Say “manufacturing automation” and thoughts immediately go to the shop floor and specialized production equipment, robotics and material handling systems. But there is another realm of possible automation — the front office.

With its extremely accurate servo-hydraulic movements and highly consistent injection processes, the MacroPower 650 makes the most of its strengths in producing these parts. Especially combined with Flowcon plus, the intelligent water flow regulator from WITTMANN. This device controls all cooling circuits and detects any disruptive factors such as blocked cooling channels or flow quantity fluctuations. Via proportional valves, the system then automatically compensates these irregularities during ongoing production, accurately down to the tenth. In this way, the temperature remains evenly distributed inside the mould. The result is a very high consistency in quality.

Ultradent's entry of its Umbrella cheek retractor took home the awards for Technical Sophistication and Achievement in Economics and Efficiency at PTXPO.

Successfully starting or restarting an injection molding machine is less about ticking boxes on a rote checklist and more about individually assessing each processing scenario and its unique variables.

Even with those top-entry beam robots, some jobs have up to five people working at a machine for secondary operations like trimming, assembly, and hot stamping. And 20/20 does not yet use the robots for loading inserts but probably will in the future, Ernsberger says.

Resin drying is a crucial, but often-misunderstood area. This collection includes details on why and what you need to dry, how to specify a dryer, and best practices.

August 29-30 in Minneapolis all things injection molding and moldmaking will be happening at the Hyatt Regency — check out who’s speaking on what topics today.

“When I started in structural foam, it was a novelty. The industry went after the wrong applications—medical enclosures and computer cabinetry—high-tolerance, high-finish parts. The machines of those days (the 1970s) weren’t suitable for those parts, so structural foam got a bad name.” That, and the radical downsizing of computers with the arrival of PCs, put a crimp in the structural-foam business. “It lagged until the end of the ’80s and start of the ’90s, when just-in-time packaging—returnable containers—came in. Since then, structural foam has been growing stronger in new applications and poundage consumed.”

In this three-part collection, veteran molder and moldmaker Jim Fattori brings to bear his 40+ years of on-the-job experience and provides molders his “from the trenches” perspective on on the why, where and how of venting injection molds. Take the trial-and-error out of the molding venting process.

In this collection, which is part one of a series representing some of John’s finest work, we present you with five articles that we think you will refer to time and again as you look to solve problems, cut cycle times and improve the quality of the parts you mold.

“The WITTMANN machines make work very easy for our technical staff,” continued Alexandre Ramos, meaning not only the robust design of the machines with clever features for easy maintenance and servicing. The manager is thinking primarily about the technical support the companies receive locally in São Paulo. WITTMANN BATTENFELD do Brasil is only an hour’s drive from the Mueller/Tecnoplast production plant.

In a time where sustainability is no longer just a buzzword, the food and beverage packaging industry is required to be at the forefront of this innovation. By adopting circular packaging processes and solutions, producers can meet regulatory requirements while also satisfying consumer demand and enhancing brand reputation. Join Husky to learn more about the broader implications of the circular economy — as well as how leading brands are leveraging this opportunity to reduce costs, increase design flexibility and boost product differentiation. Agenda: The cost and operational benefits of embracing circularity Key materials in circular packaging — including rPET and emerging bioplastics How to design a circular food and beverage package Strategies for selecting sustainable closures to future-proof packaging solutions Optimization and streamlining of production processes for enhanced efficiency How Husky Technologies can enable your sustainable success

Baystar's Borstar technology is helping customers deliver better, more reliable production methods to greenhouse agriculture.

Mike Sepe has authored more than 25 ANTEC papers and more than 250 articles illustrating the importance of this interdisciplanary approach. In this collection, we present some of his best work during the years he has been contributing for Plastics Technology Magazine.

After successfully introducing a combined conference for moldmakers and injection molders in 2022, Plastics Technology and MoldMaking Technology are once again joining forces for a tooling/molding two-for-one.

In this collection of content, we provide expert advice on welding from some of the leading authorities in the field, with tips on such matters as controls, as well as insights on how to solve common problems in welding.

Plastics Technology covers technical and business Information for Plastics Processors in Injection Molding, Extrusion, Blow Molding, Plastic Additives, Compounding, Plastic Materials, and Resin Pricing. About Us

20/20 is expanding this spring to add space for warehousing and secondary operations like assembly and decorating. (Shown here: trimming a sub-frame floor for a golf cart.)

“Michael Wittmann welcomes me just as cordially whenever I am in Austria, as Marcos and Cássio do here in Brazil. We keep in close contact with the corporate headquarters concerning technical matters, too. Our projects and issues are known there, and I know that the management in Austria is solidly backing its team in Brazil. That gives me a very good, secure feeling.”

Ernsberger doesn’t mind that the technology has spread to at least seven other countries, including China, Taiwan, Latin America, Russia, and the Middle East. He doesn’t worry about overseas competition because structural-foam parts tend to be too large and heavy to be shipped economically over long distances.

All of 20/20’s presses are also equipped for gas-assist molding, and the firm sometimes uses that technique together with structural foam to save weight and material. In addition, Ernsberger’s Uniloy foam presses have software for structural web molding, a type of low-pressure gas-assist process that hollows out most of an unfoamed part and leaves a smooth surface.

Gifted with extraordinary technical know how and an authoritative yet plain English writing style, in this collection of articles Fattori offers his insights on a variety of molding-related topics that are bound to make your days on the production floor go a little bit better.

THINNER CUSTOM RANKS From around a dozen custom structural-foam molders in the U.S. when 20/20 started up, the custom ranks have shrunk to single digits, Ernsberger says. Some were acquired by captive molders, which constitute a majority of the foam business, according to Hunerberg.

Additive technology creates air pockets in film during orientation, cutting down on the amount of resin needed while boosting opacity, mechanical properties and recyclability.

Ernsberger also says he is concerned about energy costs. “My 500-tonner consumes more energy than a 1500- or even 2500-ton injection press because of all the heating on the extruders, accumulators, fill pipes, and manifolds.” Hunerberg replies that Uniloy machines already use electric variable-speed screw drives, hydraulic accumulators, and variable-volume pumps to minimize energy consumption. But he foresees that in the next two years Uniloy’s next generation of machines will adapt electric servo-driven pumps to save additional energy, as is already the case for injection machines.

Besides its safety advantages, automation stabilizers and even reduces cycle times, boosting production and cutting scrap.

While prices moved up for three of the five commodity resins, there was potential for a flat trajectory for the rest of the third quarter.

“We have some ideas of our own on how to customize new machines. We want to increase our plant’s lb/hr throughput by 20% with the same number of presses.”

With this new business segment, the first SmartPower injection moulding machines, also from WITTMANN, were added to the machinery. But the MacroPower machines, long proven in the company, are in use here as well. Vehicle lighting has now become a design element. In some cases, very long light guides are needed – a trend which increases the size of moulds.

Sustainability continues to dominate new additives technology, but upping performance is also evident. Most of the new additives have been targeted to commodity resins and particularly polyolefins.

Ernsberger cites two keys to 20/20’s success. “The first is our knowledgeable, experienced people.” Most are long-timers with the company. It’s very hard to find people with any foam experience, he says. “It’s hard to find people who can pronounce ‘polyethylene,’ let alone ones who know how to mold structural foam.”

Discover how artifical intelligence is revolutionizing plastics processing. Hear from industry experts on the future impact of AI on your operations and envision a fully interconnected plant.

Formerly a showroom for early-aughts-era Van Dorn hydraulics, the newest additions to Drummond Industries’ transforming fleet are all-electric Niigata injection molding machines.

Despite price increase nominations going into second quarter, it appeared there was potential for generally flat pricing with the exception of a major downward correction for PP.

While the melting process does not provide perfect mixing, this study shows that mixing is indeed initiated during melting.

Across all process types, sustainability was a big theme at NPE2024. But there was plenty to see in automation and artificial intelligence as well.

In this collection of articles, two of the industry’s foremost authorities on screw design — Jim Frankand and Mark Spalding — offer their sage advice on screw design...what works, what doesn’t, and what to look for when things start going wrong.

Driven by brand owner demands and new worldwide legislation, the entire supply chain is working toward the shift to circularity, with some evidence the circular economy has already begun.

Two large, black injection-moulded parts are what Alexandre Ramos, director of Mueller/Tecnoplast, presents to us on the factory tour during our visit in São Paulo City. The larger of the two has just come off the clock out band from a MacroPower 650 injection moulding machine. They form a glove compartment with its lid, which the Mueller division is producing for the Toyota plant in Sorocaba, just 100 kilometres away. These two parts are typical examples of the company’s product range. Mueller/Tecnoplast produces parts almost exclusively destined for the automobile industry. These include many large components, such as glove compartments or, for example, fender liners and mudguards. Here, the MacroPower from WITTMANN is the preferred machine model.

Quite apart from this, sustainability is gaining more and more significance and can be improved by way of material and energy efficiency. In São Paulo, material and energy consumptions are recorded, analysed and optimised systematically. For this purpose, the machines already deliver a lot of valuable data today.

The pipe and fittings manufacturer’s new 200,000-square-foot facility represents a $200 million investment and will create 150 jobs.

The Plastics Industry Association (PLASTICS) has released final figures for NPE2024: The Plastics Show (May 6-10; Orlando) that officially make it the largest ever NPE in several key metrics.

In addition, new technology was recently announced by Norsdson Xaloy (New Castle, Pa.) for more energy-efficient heating of injection barrels, nozzles, and melt pipes (see Keeping Up section).

Join Wittmann for an engaging webinar on the transformative impact of manufacturing execution systems (MES) in the plastic injection molding industry. Discover how MES enhances production efficiency, quality control and real-time monitoring while also reducing downtime. It will explore the integration of MES with existing systems, emphasizing compliance and traceability for automotive and medical sectors. Learn about the latest advancements in IoT and AI technologies and how they drive innovation and continuous improvement in MES. Agenda: Overview of MES benefits What is MES? Definition, role and brief history Historical perspective and evolution Longevity and analytics Connectivity: importance, standards and integration Advantages of MES: efficiency, real-time data, traceability and cost savings Emerging technologies: IoT and AI in MES

Hunerberg says 600 hp is pretty much the limit for a 6-in. extruder. But Uniloy has built 8-in. extruders with 1000 hp, “monsters” capable of 5500 lb/hr apiece, more than twice the output of dual 6-inchers. Another improvement would be a screw design optimized for a specific material, though that may not be a convenient solution for a custom molder.

Learn about sustainable scrap reprocessing—this resource offers a deep dive into everything from granulator types and options, to service tips, videos and technical articles.

“About six months after I got into this business, I wondered if I had made a big mistake. But then the light came on, and I got it.” That light has burned brightly for Ron Ernsberger, founder and president of 20/20 Custom Molded Plastics, Ltd. in Holiday City, Ohio. In the 14 years since he started the custom structural-foam molder in 1999, it has grown to a $30+ million-dollar business employing 140.

“The big thing with robots is cycle-time uniformity. It eliminates the variability of a human operator. Your scrap rate goes down and productivity goes up. Adding those nine robots was like adding another machine in terms of overall productivity.”

“Optimelt screws ensure a gentle plasticising process to preserve the material undamaged,” said Cássio Luis Saltori, managing director of WITTMANN BATTENFELD do Brasil. “Even in the event of brief production interruptions, ongoing production can be continued without any risk of start-up scrap.”

Headlights, rear lights, reflectors, lenses and light guides are less and less often imported, but increasingly produced locally. Tecnoplast has established another mainstay for the group of companies with these product lines. Both polycarbonate and PMMA are being processed. “For this purpose, we need the best injection moulding technology."

20/20 Custom Molded Plastics is one of only a handful of custom structural-foam molders in the U.S., and it is busier than ever. Shown here is a 1500-ton Uniloy press with two Ranger parts-handling robots on one overhead beam. (Bottom photo: HDPE sump basins.)

Formnext Chicago is an industrial additive manufacturing expo taking place April 8-10, 2025 at McCormick Place in Chicago, Illinois. Formnext Chicago is the second in a series of Formnext events in the U.S. being produced by Mesago Messe Frankfurt, AMT – The Association For Manufacturing Technology, and Gardner Business Media (our publisher).

Join KraussMaffei for an insightful webinar designed for industry professionals, engineers and anyone interested in the manufacturing processes of PVC pipes. This session will provide a comprehensive understanding of the technology behind the production of high-quality PVC pipes: from raw material preparation to final product testing. Agenda: Introduction to PVC extrusion: overview of the basic principles of PVC pipe extrusion — including the process of melting and shaping PVC resin into pipe forms Equipment and machinery: detailed explanation of the key equipment involved — such as extruders, dies and cooling systems — and their roles in the extrusion process Process parameters: insight into the critical process parameters like temperature, pressure and cooling rates that influence the quality and consistency of the final PVC pipes Energy efficiency: examination of ways to save material and energy use when extruding PVC pipe products

Structural foam also benefits from unusual  flexibility. Today’s multi-nozzle presses allow for up to 200 different injection points on the platen, using shutoff nozzles with independent opening and closing control. “It’s a bit like a hot-runner valve-gate system with the hot runner as part of the machine, not the mold,” explains Hunerberg. This system allows multiple injection points on one big mold, or several individual molds to be mounted on one machine. For example, one job has seven molds in one twin-barrel machine, running parts for two different customers in two different materials simultaneously.

Processors with sustainability goals or mandates have a number of ways to reach their goals. Biopolymers are among them.

“When it comes to colour and gloss, we have zero tolerance,” said Ramos. It was six years ago when Mueller received its first order from Toyota to produce glove compartments. Meanwhile, the processor has become the sole supplier of this interior component for all Toyota models manufactured in Brazil. “We have never had any discussions about quality issues over all these years. The glove compartments are really a success story.” One of many – for the corporate history of Mueller/Tecnoplast is closely linked to the development of the automotive industry in Brazil.

And business has been good. His plant has expanded several times from an initial 40,000 ft2 to its current 185,000 ft2, and another 165,000-ft2 expansion is underway for warehousing and secondary operations like decorating and assembly. The plant runs 24/7 and, at 85-90% capacity utilization, is pretty much fully booked. “Lots of new things are going on, new molds being built, sample trials running. Our customer base is active and busy,” says Ernsberger. “We have one new customer that will be in our top 10 this year.”

Core Technology Molding turned to Mold-Masters E-Multi auxiliary injection unit to help it win a job and dramatically change its process.

Exhibitors and presenters at the plastics show emphasized 3D printing as a complement and aid to more traditional production processes.

20/20 was probably the first structural-foam molder to put robots on all its presses. The benefits are cycle-time uniformity, reduced scrap, and increased productivity.

“The machines are much better now,” Ernsberger notes. “They may look the same as they did 30 years ago, but the hydraulics, electrics, and controls are so much improved. The same part I ran in the late ’80s at 160 sec, ran in the ’90s at 145 sec and runs now at 75 sec.”

Another advantage of low-pressure structural foam is its ability to use aluminum molds at one-third the cost of an injection mold and with shorter lead time. Structural foam also competes in some cases with thermoforming, which enjoys even lower tool cost.

It’s a good time for the structural-foam business generally, says Ed Hunerberg, v.p. of structural foam technologies for Uniloy North America, Tecumseh, Mich., and a widely respected, 42-year veteran in the field. “We have sold more machines in the past year than in any of the previous 10 years, and our customers overall are the busiest they have been in 10 years.” He also notes that the market has been picked clean of available used machines. Reusable material-handling products—pallets and boxes—are responsible for much of the growth, he says.

“People who come into this from injection molding are overwhelmed by the number of pounds these machines can put out,” he adds. His 1500-tonner has dual 6-in., 600-hp extruders, each of which can plasticate 2400 lb/hr. “Full out, our plant will use 15,000 lb/hr with just nine machines.” He commonly runs two different materials in the two extruders of the same press—such as PP and PE or PS and ABS.

This Knowledge Center provides an overview of the considerations needed to understand the purchase, operation, and maintenance of a process cooling system.

Introduced by Zeiger and Spark Industries at the PTXPO, the nozzle is designed for maximum heat transfer and uniformity with a continuous taper for self cleaning.

As a long-standing partner of Brazil's well-known major automobile manufacturers, Mueller/Tecnoplast faces the daily challenge to combine first-rate quality with maximum efficiency. The technological means to meet this challenge come from injection moulding solution partner WITTMANN.

Take a deep dive into all of the various aspects of part quoting to ensure you’ve got all the bases—as in costs—covered before preparing your customer’s quote for services.

This month’s resin pricing report includes PT’s quarterly check-in on select engineering resins, including nylon 6 and 66.

Across the show, sustainability ruled in new materials technology, from polyolefins and engineering resins to biobased materials.

From left to right: Cássio Luis Saltori from WITTMANN BATTENFELD do Brasil, directors Pablo Aparecido Rabachini, Alexandre Ramos and Valdir Luiz Benedicto from Mueller/Tecnoplast, and Marcos Cardenal, also from WITTMANN BATTENFELD do Brasil.

Sodick Plustech’s VR-G and MS-G2 Series both utilize the company’s proprietary V-Line technology, separating plasticizing and injection functions, and have upgraded displays, energy efficiency, response time and more.

“This task could not be accomplished manually, since variations in temperature control conditions only rarely show an immediate effect,” explained Marcos Cardenal of WITTMANN BATTENFELD do Brasil. “But with this intelligent assistance system, Mueller/Tecnoplast can intervene before scrap is produced and thus save both raw material and energy.

The high reproducibility of the surfaces is so very important, because these are visible components required to match precisely the look of the dashboards, which are produced elsewhere.

Join Engel in exploring the future of battery molding technology. Discover advancements in thermoplastic composites for battery housings, innovative automation solutions and the latest in large-tonnage equipment designed for e-mobility — all with a focus on cost-efficient solutions. Agenda: Learn about cutting-edge thermoplastic composites for durable, sustainable and cost-efficient battery housings Explore advanced automation concepts for efficient and scalable production See the latest large-tonnage equipment and technology innovations for e-mobility solutions

In fact, 20/20 has cooperated with Uniloy to train several companies—three domestic and two foreign—in the ways of structural foam. “When I got into this industry, everyone kept to themselves, didn’t want to help other molders, didn’t want to share knowledge. They were so afraid someone would steal something from them. I’ve tried to change this culture, because if a new guy gets into structural foam and doesn’t know what he’s doing, he could give all of us a black eye.”

Detecting and making use of new opportunities – this virtue is firmly anchored in the DNA of Mueller/Tecnoplast. A business segment still in the making is automotive lighting, with good growth potential due to the increasing commitment of Japanese automobile manufacturers in South America. For several years now, Japanese companies have been creating a considerable stir in the market. New demands, but also more automotive suppliers are coming into the country. But even though competition is increasing, Alexandre Ramos sees this as a positive development: “I don’t intend to be the only one here, I’d rather be part of a strong production chain. After all, as the director I’m not only responsible for the company and its associates. It is very important for me to contribute to the further advancement of our country and our society as well.”

“We can always get help very quickly." This is a great incentive for us to choose WITTMANN again and again for any new projects. ”The companies Mueller, Tecnoplast and WITTMANN are linked by a long-standing, very close partnership – and one that goes beyond the borders of Brazil, according to Ramos.

Plastics Technology’s Tech Days is back! Every Tuesday in October, a series of five online presentations will be given by industry supplier around the following topics:  Injection Molding — New Technologies, Efficiencies Film Extrusion — New Technologies, Efficiencies Upstream/Downstream Operations Injection Molding — Sustainability Extrusion — Compounding Coming out of NPE2024, PT identified a variety of topics, technologies and trends that are driving and shaping the evolution of plastic products manufacturing — from recycling/recyclability and energy optimization to AI-based process control and automation implementation. PT Tech Days is designed to provide a robust, curated, accessible platform through which plastics professionals can explore these trends, have direct access to subject-matter experts and develop strategies for applying solutions in their operations.

Apart from technical needs, what Ernsberger wishes for most is more cohesiveness within the structural-foam industry. He recalls how 20 or more years ago, structural foam had a prominent presence in industry conferences. “We need to promote structural foam from within,” he says. Ernsberger himself tried to organize a structural-foam pavilion at NPE 2012 in Orlando, Fla., but that did not bear fruit. If any movement were made in the future to organize this industry sector, he says, “I would want to be a part of that.”

To combine first-class optical quality with processing efficiency, WITTMANN delivered the SmartPower and MacroPower machines destined for the lighting business segment with Optimelt low-compression screws specially developed for this field of application.

“Mueller and Tecnoplast are pioneers in plastics injection moulding in Brazil. During the early 1950s, these companies were the first to supply the rapidly developing automobile industry in this country with plastic parts,” reported Alexandre Ramos, who has had a hand himself in shaping the company’s history for the last 25 years - for a long time as sales and purchasing manager, before he was appointed director of today’s companies by the owners in 2018.

Second quarter started with price hikes in PE and the four volume engineering resins, but relatively stable pricing was largely expected by the quarter’s end.

Established in 1937 by Dr. Fritz Jacob, a German emigrant, the company first made a name for itself with household goods, manufactured primarily from metallic materials at the time. In the mid-twentieth century, the new polymeric materials provided new opportunities and extended the product portfolio, thus shifting the focus of the industry. Now they can look back on decades of cooperation with partners such as Ford, Volkswagen, Scania Latin America and Toyota.

Multiple speakers at Molding 2023 will address the ways simulation can impact material substitution decisions, process profitability and simplification of mold design.

Mold maintenance is critical, and with this collection of content we’ve bundled some of the very best advice we’ve published on repairing, maintaining, evaluating and even hanging molds on injection molding machines.

While prices moved up for three of the five commodity resins, there was potential for a flat trajectory for the rest of the third quarter.

Thousands of people visit our Supplier Guide every day to source equipment and materials. Get in front of them with a free company profile.

To make sure that his own production staff can fully exploit the potential of WITTMANN technologies, Alexandre Ramos sends them regularly to training courses. Of course, to the training center at the local WITTMANN subsidiary close by, but also to Kottingbrunn in Austria. “For our associates, it is very exciting to visit the machine manufacturing plant. They learn an enormous amount from the WITTMANN training sessions and thus always remain up to date. This is an important method to motivate our teams. So, the trip to Austria pays off.”

Ernsberger’s firm serves wide range of markets: lawn and garden products (wheelbarrows, parts for riding mowers), janitorial supplies, shelving, pallets, packaging (bins, boxes, dividers, lids), housings, and cabinetry. He focuses on materials that can run at low torque and high throughput—PE, PP, PS, ABS, and Noryl PPO alloys. He avoids polycarbonate—“It’s a high-torque, low-output material.” Ernsberger started in plastics in 1965 with compression molding, but soon moved into injection molding. Starting in 1977, he worked for two structural-foam molders. “I got into this field by accident, but it turned out to be the right choice.” He started his first firm to do structural foam, Vision Molded Plastics, in Napoleon, Ohio, but sold it four years later. When he started 20/20 he chose a name that continued the “vision” theme.

The 20/20 plant today has five Uniloy dedicated structural-foam presses of 500, 1000, and 1500 tons, plus four Milacron injection machines of 375 and 725 tons. The latter have oversized barrels (165 and 288 oz, respectively) so they can be used for foam or for solid injection molding of handles, fasteners, and other attachments to be assembled with foam parts.

“For us, WITTMANN is an important contributor to our high competitiveness,” Alexandre Ramos emphasised. And this concerns not only quality standards but also efficiency, which is due to several different factors. One of these is the high area productivity provided by the MacroPower machines. Compared to large machines of other brands, the two-platen machines from WITTMANN with their generously dimensioned mould platens take up only modest amounts of space.

The other key factor in 20/20’s success, Ernsberger says, is his equipment. “When I started there was no good used machinery available. I was lucky. I had to buy new machines, so I got the latest technology and my maintenance cost was zero.” Now his machines are turning 10 years old. “We take good care of them.”

While the major correction in PP prices was finally underway, generally stable pricing was anticipated for the other four commodity resins.