No. 7, Jalan Hasil Kawasan Perindustr. Jln. Hasil 81200 Johor Bahru, Johor Malaysia

Customer cases have demonstrated that the switch from fossil-based plastics to PLA for injection molding is very much possible, all without major financial investments.

3M™ Dyneon™ Fluoroplastic PVDF 6108/0001 is a homopolymer of vinylidene difluoride (VDF) that provides good resistance to a variety of fluids. PVDF 6108/0001 is a high melt flow homopolymer that can be used in injection molded parts requiring low part shrinkage with good permeation resistance.

Over 50 years of Innovation Research and Customer Support For more than 50 years we have been able to supply unique solutions to meet the increasing market challenges in developing and producing designated state-of-the-art 3M™ Dyneon™ Fluoroplastic PVDF products at the highest quality level.

PVDF Homopolymer and Copolymer Uses Polyvinylidene fluoride (PVDF) is ideal for multiple applications across a wide array of industries. Widely used in the chemical process industry, wire and cable industry, semiconductor industry, and oil and gas industry, PVDF is also gaining recognition in other industries such as automotive, building, electronics.

Phone +41 44 787 57 77 Fax +41 44 787 57 78 emea@sukano.com

Phone +60 7 238 60 99 Fax +60 7 234 57 70 apac@sukano.com

SUKANO ® Mold Release Masterbatches can reduce the friction between the polymer chains. This leads to a lower melt viscosity and therefore a higher melt flow without increasing the temperature. This can help to fill the cavities, especially in thin wall applications.

This goes hand-in-hand with our unparalleled commitment to research and customer support. Like all of our products, Dyneon PVDF 6108/0001 is backed by skilled researchers at several 3M tech service laboratories. Collectively, our products benefit from decades of research and development, improving upon PVDF. Toward that end, we are in regular communication with customers who deliver feedback, allowing us to improve existing products and deliver custom solutions. All of this is part of an unrelenting drive to deliver top products to you.

A bigger shift toward PLA in injection molding has been slowed by serious processing issues. There are several challenges that convertors have faced when processing injection molded PLA parts, especially when using existing equipment and tools, including:

295 Parkway East Duncan SC 29334 USA

A Release Agent facilitates the separation of the cured part from the mold. SUKANO® Mold Release Masterbatch migrates to the surface of the final product facilitating demolding of the injection molded part from the metal surface of the cavity, hence reducing the demolding force.

3M™ Dyneon™ Fluoroplastic PVDF 6108/0001 is a high melt flow homopolymer ideal for injection molding applications requiring low part shrinkage, good strength and dimensional stability. Our PVDF provides good chemical resistance to a broad range of fluids and solvents while maintaining mechanical properties at elevated temperatures.

Phone +1 864 486 1478 Fax +1 864 486 3681 americas@sukano.com

Chaltenbodenstrasse 23 8834 Schindellegi Switzerland