Solvents that work well at higher temperatures are less effective at room temperature. They take longer to evaporate or may have to be wiped off.

Hot runners and cold runners are necessary for the injection molding process. There are many variations being made every day to suit the needs of each injection mold manufacturer. For more information on how hot and cold runner systems operate and how you can integrate them into your production, check out our website at any time of the day and provide you professional plastic injection molding service by our team of experts.

Mold cleaners for injection and extrusion operations have a critical job to do in dissolving and removing resins, grease, oil and other contaminants that can leave molded parts damaged and affect the life of a mold. The right mold cleaner is one that is formulated specifically for the job. Mold cleaners are designed for removing tough resin deposits, silicone and other contaminants, with some formulations customized for the temperature at which they are used and by the products being molded. Read More...

Choosing the Right Mold CleanerTemperature differences can impact the effectiveness of a mold cleaning product. Solvents that work well on the bench and evaporate at a convenient rate may flash off too rapidly on a hot mold and aren't in contact long enough to do much cleaning.

ACIS®, Autodesk Inventor®, CATIA® V5,Creo™ Parametric, IGES, Parasolid®, Pro/ENGINEER®,Siemens PLM Software’s NX™, SolidEdge®, SolidWorks®, STEP

Take advantage of our turnkey filling services for aerosol can runs and minimum runs of liquid containers.

Every injection molding machine makes use of various parts in its manufacturing process. These parts work with each other to ensure that anything that comes out as the end product is exactly in the condition it was intended to be in. Some of these essential parts are the hot and cold runners.

Easily upgrade to a Slide mold release, mold cleaner, rust preventive, grease or other formulation to replace your existing product.

(800) 323-6433 toll-free (847) 541-7220 phone (800) 756-7986 fax Email an Expert

Another option for offline mold cleaning is the use of a mold polish and cleaning compound. Typically a paste that combines cleaning solvents and mild abrasives, a mold polish has the added benefit of leaving a sheen on the mold surface, which serves as a natural lubricant and release.

Cleaning Molds At The MachineOnline cleaners are generally used to remove mold release build up, plate out of resins and light rusting of the mold. Often molds get plate out, which is due to the adhesion of resins (such as Delrin or Celcon) or fire-retardant materials. Such build-up must be chemically removed from the mold surface to minimize potential part deformation. A resin-removing product can chemically work to break down the material and remove unwanted resin from the mold surface.

This is a system where the runners that feed the mold are operated at a low temperature. There are three or more plates used inside the mold. The working principle is almost identical to how a hot runner operates with the main difference being the use of lower temperature and pressures for the entire system. It is also a crucial part in mold making technology.

You can calculate the true cost of your purging procedure. The more information you include the more helpful the results. You can also compare your results to using a Slide purging compound.

We are going to look in detail at what cold and hot runners are, how they function as far as mold design is concerned, why they are important, their advantages and disadvantages, and the considerations one has to consider when making a choice between either.

Available for all of Slide’s products to ensure that they meet the required standards and specifications.

Need advice? Talk to an expert at 1-800-323-6433; Chat or contact us.

When it comes to making a choice between a hot runner and cold runner systems, there are certain factors that have to be considered. Each system is designed for a specific function, and jumping in blindly will cost you in the end. The following are some of the factors you have to keep in mind when making that selection.

Upon signing up, we'll send you a digital package of our popular best practices documents. We hope you enjoy, and you can unsubscribe at any time.

The entire channel used in a cold runner system is unheated. It is used to convey the molten material,be it metal or plastic, to the empty mold. Since it is devoid of the same level of heat as a hot runner, the cold runner system has to be bigger to accommodate a greater flow in each manufacturing cycle. For this reason, the cost of running a cold runner could be significantly higher, although it does come in handy when you are in need of making larger plastic injection molds.

A hot runner system is made up of a minimum of two hot places that are heated through a manifold process. The hot runner system in injection molding is constructed using heat-sensitive materials for the purpose of controlling the flow of molten materials through the mold gates into the empty cavity. The heating is usually supplied through heating coils, pipes, and rods that are connected to the runners straight from the sources of heat. There are two types of hot runner systems that are used widely in the injection molding system.

A hot runner system injection molding makes use of heat to direct the molten material into the empty mold to start the molding process. The purpose of using this much heat is to ensure the material maintains that viscous state as it moves and spreads into the crate evenly before the cooling process kicks off. These runners act as controls and having different types of them helps the injection molding operators to make better products from auto plastic parts to plastic molded chairs . In a nutshell, the materials in a hot runner maintain their high heat that ensures they are in a viscous state until every part of the mold is filled properly. When the cooling finally begins, it happens uniformly across the board.

Heated Runners: Heated runners, as the name suggests, make use of heated parts for injection molding to take place. Heated runners are further split into two parts: Externally heated runners make use of a cartridge-heated manifold with an interior system of passageways, while internally heated runners have their passages heated by a probe located within the same passageways.

GET EXPERT ADVICE ON INJECTION MOLD RELEASES, MOLD CLEANERS, RUST PREVENTIVES, EJECTOR PIN GREASE AND PURGING COMPOUNDS GET EXPERT ADVICE

Cleaning Molds At The BenchOffline mold cleaners are used primarily to dissolve resins, silicone, oil, mold release, and sometimes rust, along with other contaminants. They require a rapid evaporation rate. The best cleaners for this are formulations which rapidly remove resins and silicones by flushing the mold with a heavy top-to-bottom spray.

Insulated Runners: These are the unheated type of hot runners that make use of thick runner channels to maintain the molten nature of the material being injected into the cavity. The molds that use this type of runners have extra-large passageways that support a more free and open molten flow, and this eliminates the need to have manifolds and drops, which in turn makes modifications easier.

The 2024 Slide Products catalog is available for viewing, downloading and printing in English or Spanish.

Mold releases and resin build-up may require scrubbing with a cloth saturated with mold cleaner. Pre-saturated mold cleaning wipes are an effective offline mold cleaning option, especially for medical molding and clean rooms.