This casting mold allows you to create the "Fishing Soft Bait" from EKdahl. I recommend to print the frame two times in order to lock the mold from top and bottom. There are three filling holes at the top, this allows a better monitoring of the fill...

This is my design of a mold for a soft bait, cast in silicone. The bait is designed to be hollow in the center (like some commercial brands) to accommodate a jig head. The soft bait is about 3.25" and will take a 3/0 offset wide gap hook...

This is a 3D .STEP and .STL file for 3D Print that is compatible with Aspire, Artcam, and also other platforms that support the STL format. ...You can use this file to carve in your machine to make mold for soft plastic fishing lures.

This is made so that you can make a reusable mold, so that you can make your of soft plastic lure. This thing was made with Tinkercad. ...Edit it online https://www.tinkercad.com/things/eO7Hw4baOdd

This design is based on the out of production Blue Fox Foxee soft bait, picture included. I have uploaded three files, a half mold (print two in resin and they should fit together) and two models for anyone who wants to modify or improve upon the...

End Caps for Open V-Slot 2020 with Open Hardware logo. ... This is a remix from https://www.thingiverse.com/thing:398515

3.5" Mold for Shad Tail / Flat Tail soft bait. This example was printed on an Anycubic Photon 3D printer. It includes vents that will need to be cleaned up after injection. I recommend using a resin with a heat deflection temperature that can...

Un remix du moule https://www.thingiverse.com/thing:384230 plus d'épaisseur dans le moule et un rajout de cônes de coulée. ...

Replica of the famous zoom worm, Double Ringer. ... It is a two-part mold that you can make with your 3D printer or CNC router. ... Mold dimension: 129.63 x 90 x 20 mm

Shad soft plastic bait perch, crappie, lure 45mm 4 cav mold Lure work very good and catch a lot of fish. ... https://youtube.com/watch?v=y1CLwwPsf8A&feature=share

Mold of the famous 5" senko, an earthworm that fishes in all scenarios. It is a two-part mold that you can make with your 3D printer or CNC router. ... Mold dimension: 149 x 110 x 24 mm

This is my design of a mold for a soft bait, cast in silicone. The bait is designed to be hollow in the center (like some commercial brands) to accommodate a jig head. The soft bait is about 3.25" and will take a 3/0 offset wide gap hook...

This is made so that you can make a reusable mold, so that you can make your of soft plastic lure. This thing was made with Tinkercad. ...Edit it online https://www.tinkercad.com/things/eO7Hw4baOdd