The precision injection molding exists out of 4 stages : Stage 1: Drying of the raw material.Stage 2: Heating of the material in the cylinder.Stage 3: Injection into the mold.Stage 4: Exit and taking of the part by the robot. We work for different sectors :DefenseAerospaceMedicalFiltrationEnergyIndustrialTransport & engineeringIntelligent value storageCivil engineering More information about precision injection molding of plastics?Contact us

Injection molding means that the HDPE plastic is shaped by pressure in a heated mold. It is a very fast production method and the labor cost is low. It is popular with the production of smooth surface products in the production of complicated parts. Since we are working with a large number of injection equipment, our company is a competent company that fulfills the needs with the most affordable prices.

We have started our journey in 2012 to facilitate our customers’ lives and to offer many opportunities that would enrich your lives. Over time, we have developed ourselves and have succeeded in becoming a respectable, reliable and global company in the petrochemical sector, after increasing our resources and enhancing our product range.

Feronyl belongs to SUB-ALLIANCE, which regroups different advanced manufacturing capabilities in high-precision domains. Our different teams enable a unique synergy between development and manufacturing in polymers, composites, metals and transmissions.  Our manufacturing processes are qualified as best in class and guarantees the highest level of quality, supported by short delivery times.

In general, HDPE injection has 700-2000 kgf / cm² pressure, 160-250ºC temperature and 10-30 seconds production time. There are different injection devices that produce many products including the smallest parts, and the largest plastic parts. The hot runner system is used in injection molding for reducing the need for the material, labor and machine capacity.

Our different teams enable a unique synergy between development and manufacturing in polymers, composites, metals and transmissions.  Our manufacturing processes are qualified as best in class and guarantees the highest level of quality, supported by short delivery times.

Feronyl is specialised in precision injection molding of plastic. The precision injection molding exists out of 4 stages : Stage 1: Drying of the raw material.Stage 2: Heating of the material in the cylinder.Stage 3: Injection into the mold.Stage 4: Exit and taking of the part by the robot. We work for different sectors :DefenseAerospaceMedicalFiltrationEnergyIndustrialTransport & engineeringIntelligent value storageCivil engineering More information about precision injection molding of plastics?Contact us

In the HDPE production market, the products that are produced with injection molding technique constitute 30% of total production. HDPE injection products, which are used in many areas, lead the market since they provide many advantages. The melting of HDPE by the heat and shaping it in the injection machine is the most common method for producing plastic materials. The process consists of closing, injection, ironing, cooling, mold opening and removal from the mould. Every stage is performed automatically and the finished part is removed from the mold during the extraction process.

HDPE injection material is used in the production of covers, cases, plastic pallets, kitchen items, toys and many other products and this is a high density polyethylene material. With the injection molding, the HDPE takes every shape. Since the values of temperatures and pressure value depending on the product, it can be widely used.