Injection moulding machine for PET preforms. Husky injection moulding machine Hpet 230,with 32 cav. mould for 1881 PCO     Shooting Pot ----------------RSE80D/80     Extruder  --------------------Hyflo RS80     Maximum Cavities ----------32     Maximum Shot Size ------- 1538  cu. cm     Machine...

Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2017 Neck 3025 Weight 17g, for 500-600ml water bottle Model: 32 50x130 GEN 3.5 Stroke 60 mm Max Capacity: 88t Rec. Capacity 85t Complete refurbishment done by HUSKY in 2017 Perfect condition and availa...

Moulds for Closures. Husky Hot runner from 2008 Rouxel watercap cold half with the slitting machine Taiwan hwa long without the thermocontroller PMS Mold Master Mold is working condition Neck 30/25 2gr 16 cavities Mold runs at 6,5 sec Dimensions of the mold: 885 x 380 ...

Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY 500 P155/150 E155, year 2005 Working hours 126000 The system includes the following: Mould Complete 144 Cavity 21.2g/28mm PCO 1881 Ecobase 1 Preform Mould (HR + Cold-Half) Extraction Robot Resin ...

Moulds for Preforms. Used cold Half for preform Brand: Husky Weight: 12.5 gr Neck: 29/25 for still water Cavities: 96 cav. Pitch = 50 x 140 HPP 4.0 Mould number of shots: 305.185 take out plate ( with 384 pcs of tubes )+ coolpik tubes ( 96 pucks and 288 pcs of tubes):...

Moulds for Preforms. Used Cold half and robot plate for Husky injection molding machine Weight of the preform 30.4gr Neck: 26-22.12 P1 gravity II Lenght of the preform 119,20 mm Take out plate for the robot included the hotrunner is not included Mould stored Number o...

Injection moulding machine for PET preforms. Husky Hypet 90 RS65/65 for PET preforms from 2010 Includes: Hopper Not currently in production, available immediately and in excellent condition!...

Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY 500 P155/150 E155, year 2007 Working hours 100942 (May 2024) The system includes the following: Mould: Complete 144 Cavity 52.0g/28mm PCO 1810 Preform Mould (HR + Cold-Half) Cavity Plate Model: ...

Injection moulding machine for food and beverages caps. Husky HyCAP400 injection moulding machine for closures Machine is in perfect working condition 400 V 50 Hz Available immediately! ...

Injection moulding machine for PET preforms. Complete injection molding system for production of PET preforms HUSKY GL300PET P100/110 E120 Constructon year 2002 Includes: Hopper & loader Piovan Dehumidificator Piovan RPA1200 Humidifier Piovan DS528 Drier Piovan I5000IX Soft drop MB year 2...

Moulds for Preforms. HUSKY Cold Half System HyPET 120 year 2016 Neck PCO 1881 Weight 22.7 g, for 350-450 CSD Model: 32 50x130 GEN 3.5 Stroke 63 mm Max Capacity: 134t Shot Counter: Around 117,000 Set of new core change for 22.28g can be purchased to an additional...

Injection molding machine from 1000 T. Working hours of the machine: 7163 Reinforced screw. No moulds for sale Robot Husky TMA is included Year of production: 2008....

Moulds for Preforms. Husky cold halves and conversion set 1- 72 cavity for 29/25, preform weight: 25,9 gr, 50V x 120H, platform HYPET5e 2- 72 cavity for 29/25, preform weight: 12,1 gr, 50V x 120H, platform HPP5e - Core conversion set for 29/25, 10,10 gr, 72 cavity...

Injection moulding machine for PET preforms. Used injection molding machine for PET Preforms Brand: Husky Model: HyPET 300 4.0 P100/110 EE120 Year: 2017 Working hours (May 2024): 37.804 Auxiliaries included: Hot Runner 72 cavities Dryer Plastic Systems DR824.1HT Hopper loader Plast...

Injection moulding machine for food and beverages caps. HUSKY Injection moulding system for closures H800 RS115/100 from 2011 For caps 2,90g. PCO1810 with a contract cycle of 6.5 seconds The line is included: - Hot channel controller for mold - CapCooler, storage bin, orientator - Intravis video ins...

Moulds for Closures. Husky mold for closures PCO 1881 from 2007 Cap weight 2,3 g for highly carbonated drinks, water etc. 48 cavities Mold after service and replacement of several molding elements Available immediately...

Injection moulding machine for PET preforms. Complete system of Husky Hypet 225 injection moulding machine for preforms Included Husky Hot Runner Machine working hours: 53.000 h Cycle time: 17,6 second (Husky recommendation) Auxiliaries: - Resin Hopper, Plastics Sytems H6000 - Resin Dryer, ...

Moulds for Preforms. Husky cold half and robot plate Weight 9.5gr Neck: 26-22.12 P3 Cycle time: 6,7 sec Take out plate included 7.066.300 shots...

Injection moulding machine for food and beverages caps. Husky H300 RS80/70 injection moukding machine for caps & closures Includes Piovan RPA800 Dehumidifier Working hours: 67.900 h In good condition and available immediately! ...

Injection moulding machine for food and beverages caps. Husky injection molding machine for closures Model: Hycap 225 from year 2015 Includes Husky 48 cavity mold 29/25, weight 1.25g Output: 1.5 million closures/day Working hours: 31.000 Available immediately! ...

Injection moulding machine for PET preforms. Husky LX225 P85/100 injection molding machine, year 1996 Includes: - Husky P85/100 E85 Injection Unit - Husky LX225PET Clamping Unit - Husky S/E Extraction Robot B - Sipa mold, with 12-cavity Sipa hot runner & 85g (40/48 neck) Sipa cold half (w...

Injection moulding machine for PET preforms. HUSKY Injection Molding Machine for Preforms MODEL INDQ90PET RS 80/80 16 cavities Auxiliaries included: - Desiccant Hopper - Desiccant Dryer - Mold Dehumidifier Molds Included: - Hot Runner 16 Cavities - Cold Half PCO 1810 - 17 gram Preforms -...

Injection moulding machine for PET preforms. Husky XL300 PET injection molding machine for PET preforms, year 1990 Includes: - Husky extraction robot - MPET injection molding mold, with 48-cavity MPET hot runner and 2 MPET cold halves: · 13,8g (29/25 neck) with conversion kit to 15...

Injection moulding machine for PET preforms. Complete HUSKY injection moulding system for preforms from 2010 Model: HyPET300 P100/110 E100, 72 cavities Working hours : 65.000 hours The line includes the following ancilliaries and equipment: - Robot - Resin hopper Plastic System - Resin dry...

Injection moulding machine for covers. 300 Ton Husky Injection Molding Machine Manufacturer: HUSKY Model: G300 GEN RS85/70 Year:1999 Screw stroke: 340mm Screw L/D ratio: 24.7:1 Max Injection Pressure: 29,100 PSI Injection Capacity: 1308 cm3 Tonnage: 300 Tie bar spacing: 720mm X 720mm Cl...

Injection moulding machine for PET preforms. Husky HyPET300 P100/120 E140 Construction year 2007 Supplied auxiliary equipment: Dryer/dehumidifier and T-conveyor belt Working with a mould 72 cavities 50x140 18.5g PCO1810 Hot runner available at extra price Removal robot Eisbär Resin dryer ...

Moulds for Preforms. HUSKY Cold Half System year 2017 Neck 38 mm Weight 76 g Model: 16 63.5 x 160 Gen 3.5 Stroke 114 mm Max Capacity: 104 t Used in a HyPET 120 In perfect condition and available immediately...

Injection moulding machine for food and beverages caps. Husky H225 RS55/50 injection molding machine from 2002 Running hours: 155.000 It was used for production of caps and closures Machine in working condition ...

Moulds for Closures. Used cold Half for caps and closures Brand: Husky Weight: 1.75 gr Neck: 30/25 for still water Cavities: 48 cav. number of shots: 239.816 HotRunner not available ...

Injection moulding machine for PET preforms. Complete injection molding system for production of PET preforms HUSKY GL300PET P100/110 E120, Constructon year 2003 Injection Unit: P100/110 E120, Clamping Unit: GL300PET, Dryer:Plastic System DR220HT Mold Dehumidifier Plastic System DSH1800 ...

Injection moulding machine for PET preforms. Used Injection Machine for PET Preforms HUSKY 500 PET 155/150 E155, year 2005 Working hours 121.924 The system includes the following: Mould Complete 144 Cavity 45.8g/28mm PCO 1881 Ecobase 1 Preform Mould (HR + Cold-Half) Cold-Half and hot ru...

Injection moulding machine for PET preforms. Injection molding system HUSKY HyPET 300PET P100/120 E140 for PET preforms . Includes: Dry Pack cabinet with integrated climate control of mold area EISBAR, from 2007, Power:147 kW Dry Pack Hopper EISBAR model:H5.5 from 2007 Blower KAESER model:BB...

Injection moulding machine for PET preforms. Husky GL 300 P100/110 E 100 for PET preforms from 2003 Includes hopper, dryer, mould dehumidifier and mezzanine Running Hours: 95296 Chiller and mold not included Last audit January 2018 by HUSKY Auxiliaries: Handling / Robot Model FSI 200 GL...