Compared with other moulds, the structure of injection moulds is more complex and precise , the operation and maintenance of the product requirements are higher, so in the entire production process, the use of positive solutions and careful maintenance, maintenance to maintain the normal production of enterprises, improve the efficiency of enterprises, has a very important significance.

BMP Medical is a quality manufacturer of plastic consumables and plastic products for research and medical diagnostic laboratories. Our products are manufactured to the highest quality standards. We offer a wide selection of products sold through the world’s premier laboratory distributors.

We offer two lines of tissue grinders for the clinical lab and research lab. The standard product is all plastic and is designed to grind softer tissues such as liver and spleen. The Ultra tissue grinder line has a vitrified tip and is designed for tougher material such as muscle or bone. Both lines are delivered sterile sealed Tyvek® (Tyvek® is a registered trademark of DuPont) package.

Automotive plastic parts are used more and more widely. Automotive plastic parts are not only cheap, but also environmentally friendly, beautiful, convenient and durable. Nowadays more and more automobile metal parts are replaced by plastic parts. In order to ensure the normal operation of various parts, the maintenance and maintenance of automobile plastic parts are also very important.   Maintenance methods of automotive plastic parts:

When collaborating with BMP Medical, you will experience very robust quality assurance standards. BMP Medical is ISO 13485:2016 certified, fully FDA compliant, and cGMP. Our continuous improvement approach provides OEMs superior quality and better management oversight of their suppliers. Ask us why BMP Medical became the first MedAccred certified injection molding company within the MedTech industry.

Djmolding is a professional china plastic injection molding or moulding company with mould and dies development and manufacturing

What is the injection mold? Injection mold is a tool for producing plastic products; it is also a tool for imparting complete structure and precise size of plastic products. Injection molding is a processing method used in mass production of complex parts of certain shapes, specifically refers to plastics that melt by heat from injection molding machines. High pressure is injected into the cavity, and after cooling and solidification, a molded article is obtained. Mold application: Mold is the basic process equipment for […]

BMP Medical is a family-owned business with nearly one hundred employees. We foster strong, long-term relationships to develop tailored plastic manufactured solutions for your medical device and component needs. You will always experience a one-on-one personal touch with a complete team approach when interacting with BMP Medical. Whether you are reviewing a quotation with our sales representatives or discussing a prototype with our engineers, you will always experience a friendly, knowledgeable, and extremely dedicated individual. We work endlessly to provide optimal value to our customers, and take pride in our ability to be agile to your evolving needs. Get to know BMP Medical!

With the continuous development of automotive electronics, higher requirements for product modeling, JasonMould here shares the five steps in the injection molding process. 1. The mold structure design A set of high-quality molds requires not only good processing equipment and skilled mold making workers. Another very important factor is good mold design, especially for complex molds. The mold design accounts for more than 80% of the mold quality. An excellent mold design is: under the premise of meeting the requirements of customers, the […]

A short shot is the incomplete filling of a mold cavity which results in the production of an incomplete part. If a part short shots, the plastic does not fill the cavity. The flow freezes off before the flow paths have completely filled. To ensure the finished part is of good quality, the part must also be adequately packed with plastic. Therefore the question to ask is not only, “Will the part fill?” but also, “Can a good quality part be made?” Causes

Also known as “bumper”, but in fact it is only the auxiliary shell outside the bumper, not the body of the bumper. Bumper housing plays the role of cushioning and energy absorption, the working environment is relatively complex, and the volume is larger, so it is generally made of polypropylene (PP), because of its lighter weight and better corrosion resistance.

Our workforce boasts a high degree of experience and training in the manufacturing of plastic medical devices and components for OEM partners. We will work together with you on developing a personalized and effective quality plan and assurance program with routine audits that meets all of your quality, traceability and consistency requirements. We’ll be your trusted long-term partner. BMP Medical employees are trained with an emphasis on the “pursuit of perfection” in all we do.

Failure to use the correct rotor cushion or adapter will shorten the life of the bottle and may prevent achievement of the maximum rated RCF and/or bottle failure.

These precision molded centrifuge bottles are available in polycarbonate or polypropylene. For low speed applications the bottles provide excellent value for large volume/large batch centrifugation procedures. For high-speed work, the easy-to-use Noryl® (Noryl® is a registered trademark of General Electric Company) sealing caps with silicone O-rings enable leak-free processing at high centrifugal forces over long durations. Bottles must be filled to 80% of capacity.

Efficiency and precision are paramount in the medical device manufacturing industry. As technology advances and regulatory requirements become more stringent, the need for streamlining the assembly process has never been more

According to the size of the machine, how much per injection, so as to determine the product ranking mode and the number of holes. The more the number of moulds produced, the lower the cost of injection moulding. Because the cost of injection moulding is calculated according to injection order.

BMP Medical, a manufacturer of diagnostic products, has a full line of urinalysis disposables. We offer the components separately, or in various kit sizes and configurations. The line is built around our 10-chambered Decislide which is made out of optically clear acrylic. It can take 10 individual samples on the same slide eliminating the need for a new slide for each sample.

In today's healthcare landscape, precision, reliability, efficiency and quality are paramount. Medical injection molding companies play a crucial role in meeting these demands, especially in the development of life-enhancing medical devices, diagnostic tools, and...

Weld Lines The flowing defects on product surface or the linear defects that are caused when melt fronts meet each other after splitting. Weld lines refer to the lines that occur on a plastic product surface when the cold slug melts. In areas of mold cavity where the molten plastic meets inserts or holes, areas with inconsistent flow speed/flow interruptions, where multiple flows meet or when jetting happens during mold filling, linear weld marks tend to occur due to imperfect bonding. […]

BMP Medical Cytology Funnels for the Shandon CytoSpin® Centrifuge BMP Medical Cytology Funnels are the functional equivalent of the Thermo Shandon CytoFunnel®. Fully compatible with the Shandon CytoSpin Centrifuge, BMP Medical Cytology Funnels can be used to deposit a thin layer of cells in a clearly defined area of a microscope slide. The filter card absorbs any excess fluid. Operation is identical to those supplied by Shandon and easy-to-follow instructions are included in each pack. All products sold in case quantities only.

Apart from wood and leather, the dashboards of automobiles are basically plastic, but there are differences between hard and […]

The main determinant is the total number of products that customers need to produce. It takes about the same time to produce a product. Multiply the time to produce a product by the total amount of production the customer needs to produce to figure out how long it takes.   Material and machine preparation time should also be taken into account before formal production. The preparation time of the machine is very short, because the equipment of the injection moulding factory […]

Select the appropriate molding equipment, determine the reasonable process conditions, if the injection molding machine is too small to meet the requirements, too […]

According to the product appearance requirements, determine the parting surface. The position of parting surface should be beneficial to die processing, exhaust, demoulding, etc. The more products, the greater […]

We are ISO 13485: 2016 certified. Our Quality Management System (QMS) is designed to meet all of our customers’ expectations and documentation requirements and we will work with you to address any additional requirements.

Excellent weather resistance, guaranteeing long-term use without color, aging cracks (including heat and oxygen aging and light aging);   Good chemical resistance, to resist the erosion of oil and daily chemicals;   Easy moulding, the injection grade material should have enough fluidity to ensure the moulding of complex components and improve production efficiency.   Economy requires material with high performance-price ratio.   Material requirements for exterior accessories   Weather resistance: Weather resistant materials such as AES, ASA (AAS), PC/PBT (PET) should be selected for parts that are not coated […]

Centrifuge bottles may be autoclaved at 121ºC at 15 psi for 20 minutes. Caps should be placed on the bottles without engaging the threads. Bottles are qualified to the rated g-forces using Sorvall® (Sorvall® is a registered trademark of Kendro Laboratory Products) and Fiberlite® (Fiberlite® is a registered trademark of Piramoon Technologies Inc.) high-speed rotors, tested at 20ºC, with bottles filled to 80% of capacity.

For specimen collection and transport, this system provides disposable products for the convenient collection, delivery, and testing of urine specimens. A plastic cup is provided for specimen collection and the pressure sensitive patient identification labels have ample writing space. The lightweight transport rack is small and easy to carry yet provides space for up to 20 tubes with labels and caps. The tubes are made of sturdy polystyrene and are safe for centrifuging. The flared top permits the use of a midget urinometer ensuring a tight cap fit.

We continuously work to ensure that we meet all quality and regulatory requirements throughout your entire product life-cycle.

Polypropylene Beakers are resistant to most commonly used laboratory reagents, including a variety of strong acids, bases, and organic solvents, these high quality polypropylene beakers are the premier choice for scientific laboratory applications. All beakers are transparent for clear content visibility and graduated for easily estimating volumes. Molded-in pouring spouts, and a rolled lip, for a dripless working environment. Autoclavable to 121ºC ( 248ºF).

These high-quality non-graduated lab containers are designed for the collection, transport, and storage of specimens and samples. Tight fitting lids prevent leaks and odors. Ideal for storing biologically hazardous samples for terminal autoclaving before disposal. Molded from various materials. The stackable containers are resistant to freezing and boiling.

Step one is to establish the correct Intellectual Properties register rights for your product. Once that is complete, you are ready to engage with BMP Medical as your trusted manufacturing partner. We understand your concerns when it comes to protecting your IP. We will work closely with you on developing a signed nondisclosure agreement that states your organization owns the IP.

BMP Medical is a leading plastic manufacturing of medium- to high-volume medical devices and components. Our global state-of-the-art facility located in Sterling, Massachusetts, offers product design and development, R&D tooling, custom cleanroom assembly and packaging, Class 7 assembly, and Class 8 cleanroom manufacturing. Whether you have a new device concept, an approved design, or a design transfer, we’ll work with you to provide the best injection molding solution.

The Hemodrop is designed to reduce the risk of exposure to bloodborne pathogens in the Hematology laboratory. To prepare a manual differential smear, a drop of blood needs to be dispensed onto a glass slide from the specimen tube. Simply puncture the rubber stopper with the Hemodrop, and then invert and press gently onto the slide. A single drop of blood will be dispensed and the slide is ready. No more removing the stopper and manually putting a drop on the slide to test blood.

Efficiency and precision are paramount in the medical device manufacturing industry. As technology advances and regulatory requirements become more stringent, the need for streamlining the assembly process has never been more

Our 80,000 sq. ft. plastics manufacturing facility is based in North America and headquartered in Sterling, Massachusetts.

We are a privately held company that has been in business for over 45 years. We use state-of-the-art molding techniques and machinery to produce varying-sized components with very tight specifications. We also offer design consultation, engineering, drawing, R&D, tooling, mold development, process automation, and statistical process control. Our facility is equipped with a Class 8 cleanroom for manufacturing, assembly, and packaging needs.