All sheet metal parts are built on-demand and with lower setup costs compared to CNC Machining. Depending on your needs, order as little as a single prototype up to 10,000 production parts.

is a thermoset process that mixes a two-component compound together, which is then heat cured in the mold with a platinum catalyst to produce a final part.

VDI is an international standard for mould texturing of matte surfaces. It is mainly processed by Electrical Discharge Machining (EDM) when mould machining.

The sequence of events during the injection mould of a plastic part is called the injection molding cycle. The key steps in the injection molding cycle are: Clamping: The two sides of the mold are closed and clamped shut. Injection: The material is fed into the machine and pushed towards the mold. While this is happening, the material is melted by heat and pressure. The plastic is then injected into the mold — this is called the “shot.” Cooling: The plastic in the mold cools and solidifies into the shape of the part. Ejection: After the part cools, it is ejected from the mold.

is a manufacturing process where resin in a barrel is heated to a molten state, then shot into a mold to form a final production-grade thermoplastic part

If you select a custom finish in the Instant Quoting Engine it will require manual review. Manual quoting usually takes 1-2 business days.

Injection molds are precisely CNC milled and polished, which gives the parts terrific surface, customizable treatments are also available.

are two-part injection molding processes where one material is overlaid onto a second substrate part or metal insert to create a single component.

Injection molding is one of the most often-used manufacturing processes for creating plastic parts. Thanks to its high-precision, repeatability, and cost efficiency at scale, injection molding is used to make a variety of products and parts from the smallest medical insert up to large automotive & aerospace and defense parts. The injection molding process requires an injection molding machine, raw plastic material, and a machined mold. The raw plastic material is first melted in the injection unit and is then injected into the mold — most often machined from steel or aluminum — where it cools and solidifies into the final plastic part. The key steps in the injection molding process are clamping, injection, cooling, and ejection.

This is a type of engineering plastic that offers a high strength-to-weight ratio and is resistant to many chemicals. It is often used in the automotive and aerospace industries. This material has high toughness, dimensional stability and good resistance to heat. Furthermore, it has good impact resistance and stiffness. It is used in gear cases, automotive bumpers, and other applications that require chemical and corrosion resistance.