Phone +1 864 486 1478 Fax +1 864 486 3681 americas@sukano.com

Our experts will also work closely with you throughout the design and prototype phases to ensure that your product meets your precise specifications and operates at the highest standard.

Our experts can help facilitate your requirements anywhere along the product life cycle, from concept all the way through to manufacturing.

Phone +60 7 238 60 99 Fax +60 7 234 57 70 apac@sukano.com

No. 7, Jalan Hasil Kawasan Perindustr. Jln. Hasil 81200 Johor Bahru, Johor Malaysia

Our state of the art service and support tools will guide you all the way from concept/design through to manufacturing, bringing your ideas to life!

With a combined 20 years experience in the industry, Injection Moulding Australia is the number one destination for all your injection molding needs.

A Release Agent facilitates the separation of the cured part from the mold. SUKANO® Mold Release Masterbatch migrates to the surface of the final product facilitating demolding of the injection molded part from the metal surface of the cavity, hence reducing the demolding force.

295 Parkway East Duncan SC 29334 USA

Customer cases have demonstrated that the switch from fossil-based plastics to PLA for injection molding is very much possible, all without major financial investments.

A bigger shift toward PLA in injection molding has been slowed by serious processing issues. There are several challenges that convertors have faced when processing injection molded PLA parts, especially when using existing equipment and tools, including:

Phone +41 44 787 57 77 Fax +41 44 787 57 78 emea@sukano.com

Click on the button below to be redirected to our contact us page and get in touch with an Injection Moulding specialist.

SUKANO ® Mold Release Masterbatches can reduce the friction between the polymer chains. This leads to a lower melt viscosity and therefore a higher melt flow without increasing the temperature. This can help to fill the cavities, especially in thin wall applications.

Injection Molding Australia have 3D printing machines which enable us to create a prototype of products from a completed 3D CAD design. Prototypes enable you to hold the product in your hand and give you an insight into how it will function prior to creating the tool for production.

Chaltenbodenstrasse 23 8834 Schindellegi Switzerland

Based in Melbourne, our facilities use state of the art Injection Moulding machines to ensure the highest quality and consistency when it comes to your product.