That’s a big wad of cash, for sure, but few companies are the size of Google, nor do they have to validate a mold that might cost more than a yacht. In some cases, Edman pointed out, it might be simpler to just print the parts, as suggested at the beginning of this article.

"Through its own name, the brand plays with references to pop music and through an exclamation which is all Italian but is now recognized all over the world, thus recalling the path undertaken by those who have spread the tradition of homemade pasta throughout the world," according to Eurostampi's information.

As it turns out, there are some very valid reasons to 3D-print a mold. There’s the aforementioned need for speed, for example. That might be all the justification necessary for a person who needs a hundred or so parts in a few days.

The company announced that 2014 will be an important year for new investments planned in technology and logistics, and for commercialization of products. "The birth of the brand MAMMAMIA is part of this renewed industrial strategy, offering simple and competitive products which are the result of the creativity and initiative of Eurostampi's owner, Valentino Dall'Igna," Eurostampi said. "After the launch of the products, various initiatives will be activated either from the website of MAMMAMIA and from the official Facebook page of the new brand."

But before you run off to your computer, gung-ho to upload your latest product design, please remember the “hundred parts or so” caveat. That’s a reasonable quantity expectation for most 3D-printed molds, and it might be far less if you want parts molded from a high-temp polymer such as ULTEM or a glass-filled nylon. Around the 100-part threshold, your mold will be kaput and you’ll heading back to the 3D-printer to build a new one.

For your patience, you get a tool able to mold perhaps 10,000 parts or more, depending on the workpiece material, that has a price tag probably not a whole lot higher than a 3D-printed tool.

Tim and Caleb discuss the challenges of hiring and retaining employees in the metal fabrication industry, particularly at...

3D Hubs, an online service provider, works with a network of manufacturing partners to determine the most cost-effective and streamlined way to bring product designs to fruition. As such, it often recommends traditional steel molds as the best solution for its clients, especially for injection-molding end-use parts.

“It’s all a question of your reasons for building a mold and what you’re willing to put up with,” he said. “These are pretty low-cost tools made of relatively inexpensive material, so if you have any sort of production quantities, you could just plan on burning through a handful of printed molds. That said, an increasing number of companies are choosing to go the direct-print route, especially in light of increasingly faster print speeds and the availability of robust, end-use materials.

“One of the biggest issues with plastic tools is their higher coefficient of thermal expansion,” he said. “This causes them to grow and shrink during use, leading to dimensional variations of the finished part. We also find that plastic molds are unpredictable. You might get 20 or 30 shots out of one, but then again, it might break on the first part. So even though the mold itself might be less expensive to produce than one made of metal, it can end up costing far more in the long run.”

“They’re fast and inexpensive to make. Just remember that they’re limited. But if you need a reliable tool, one that’s able to handle most engineering-grade resins, and you don’t have thousands and thousands of parts to make, I’d go with aluminum,” said Utley.

Varotsis said that 3D Hubs continually works to expand its injection molding offerings to accommodate “a whole range of new possibilities that serve the needs of its engineering customer base.”

The other caveat is part design. As Varotsis noted, parts produced with 3D-printed, two-part molds are limited to less complex geometries. Undercuts and similar features, which are common with production mold tooling, must be generated through the use of hand-loaded inserts. The reason is that the automatically sliding side-action cores used in metal molds are not an option because of their cost and design complexity. Again, no big deal unless you’re planning on making several hundred parts, in which case the manual labor might become burdensome.

“As a rule, manufacturers have two options for rapid injection mold tooling: traditional metal molds, or very-low-run, typically 3D-printed, plastic molds,” said Alkaios Bournias Varotsis, technical marketing engineer for Amsterdam-based 3D Hubs. “With the latter, you’re generally limited to a basic, two-piece mold with no side actions; relatively simple part geometries; and, because their cooling capabilities are less robust than with metal molds, much longer cycle times.

In his experience, customers that can wait three to five weeks for a steel mold will see better results. A manufacturer of sports equipment in Norway, for example, recently turned to 3D Hubs to machine a whopping 29 molds in just 17 weeks for a series of polyoxymethylene and glass-filled nylon components. By waiting for steel molds, the Norwegian company took delivery of tools it could use for years instead of weeks or even days.

“That last part isn’t all that important because of the lower production quantities involved with 3D-printed molds, but what is important is mold longevity. With abrasive or less-moldable materials, you might only get 10 pieces before the mold chips or breaks or wears to the point that part quality becomes unacceptable,” said Varotsis.

Plastic injection molds can’t be made in a minute, or even in an hour. But they can be 3D-printed in a day or so, which is far faster than the weeks or even months most in the industry have come to expect.

The solution? Use one of Formlabs’ 3D printers and a high-temp resin to build a temporary mold, thus “bridging the gap between prototype and production, reducing turnaround time for a crucial component by 85 percent while saving over $100,000,” said Edman.

This is why most of Protolabs’ molds are made of aluminum, although, Utley said, steel might be used when molding high-temperature resins such as PEEK.

According to Andrew Edman, industry manager for product design, engineering, and manufacturing at Formlabs, SL produces the fine detail and smooth surface finishes needed for plastic injection molding. It’s also known for its ability to produce patterns for investment casting, one of the first uses of the technology.

Until she retired in September 2021, Clare Goldsberry reported on the plastics industry for more than 30 years. In addition to the 10,000+ articles she has written, by her own estimation, she is the author of several books, including The Business of Injection Molding: How to succeed as a custom molder and Purchasing Injection Molds: A buyers guide. Goldsberry is a member of the Plastics Pioneers Association. She reflected on her long career in "Time to Say Good-Bye."

Eric Utley, additive manufacturing applications engineer at Protolabs Inc., Maple Plain, Minn., would like to point out that the choice of plastic injection mold tooling isn’t an either/or choice between steel and polymer. There’s also aluminum.

Online manufacturing service provider 3D Hubs often recommends traditional steel molds for end-use part applications. 3D Hubs

Depending on part complexity and the number of shutoffs and side-actions, molds often can be turned around in a few days, straddling the “gotta have it tomorrow” crowd and those willing or able to wait a month or so.

In January, the company launched the first two models of its pasta machine: BIG MAMA and LITTLE MAMA. Entirely made of stainless steel and plastics certified for food use, the MAMMAMIA pasta machines do not require electricity and are practical to use and install. "These products are inspired by professional machines and they are ideally suited to the home environment in terms of cost, convenience and size," Eurostampi notes.

What do moldmaking and pasta making have in common? Not much, unless you're the Italian injection mold manufacturing company Eurostampi Srl, which has specialized for 25 years in the design and manufacture of molds. The company announced the launch of its new brand, MAMMAMIA, inspired by the Italian gastronomic tradition and culture and appealing to a young, international audience.

“The majority of cases I see are for manufacturing validation,” he said. “A customer might have a part that’s quite finicky to mold, for example, or looking at pulling the trigger on an expensive multicavity tool. Perhaps they’re making a consumer product with a Class A surface finish on all sides of the part, or they want to do mechanical or chemical testing. There are a lot of good reasons for getting your hands on a few dozen parts so you can make sure they’ll perform as planned before you commit to hard tooling.”

In terms of customer-use cases, Edman said most of his are hush-hush, but he did discuss the Google Advanced Technology and Projects lab wanting to validate a product’s design before moving into large-scale production of a wearable, over-molded electronics device.

Of course, you can always use 3D Hubs’ printing service to produce your own mold if you do not have access to an industrial printer, he added. That is what researchers at Eindhoven’s University of Technology, Netherlands, recently did to create patient-specific models of neonatal organs using PolyJet-printed molds.

To someone needing molded parts pronto, a week is an eternity. This is one reason why 3D-printer manufacturer Formlabs Inc., Somerville, Mass., continues to see a strong call for molds made using stereolithography (SL) technology.

What do moldmaking and pasta making have in common? Not much, unless you're the Italian injection mold manufacturing company Eurostampi Srl, which has specialized for 25 years in the design and manufacture of molds. The company announced the launch of its new brand, MAMMAMIA, inspired by the Italian gastronomic tradition and culture and appealing to a young, international audience.

“Here’s where I think it makes sense to make a 3D-printed tool for injection molding,” Utley said. “If you’re in a hurry, and you already own an Objet or comparable high-end printer, and you have access to an injection molding press, and you have an injection molding technician on-site who knows how to set that press up, and you have some experience in mold design, then by all means go ahead and print your own molds.

The mold design itself, however, is also different, requiring larger draft angles and greater care with the placement of ejector pins and gates. This must be done to avoid undue stress on the mold. None of this is meant to imply that 3D-printed molds don’t have their place—they do—only that they need a little extra TLC during and after the design process.

That’s great, you’re thinking, but really? A plastic mold? Why not just print the parts themselves and cut out the middleman, so to speak?