In addition to its headquarters in Rochester, Atalys has manufacturing facilities in Asheboro, NC, and the Dominican Republic. The New York and North Carolina plants have multiple Class 8 cleanrooms for molding and assembly on site; the Santo Domingo site in the Dominican Republic offers cleanroom assembly and automation. The company said it adheres to scientific molding principles and is equipped with presses ranging in size from “near micro molding” to 1,400 tons.

Schad eventually left behind the company he built after selling his majority stake in 2007 to Canadian private-equity investment firm Onex in a deal worth C$960 million overall. "It didn't work out to stay," he says simply.But Schad found he couldn't leave behind what he'd been doing since founding Husky in 1953 as a small machine shop. Originally intending to build air-boats after Husky, his attention soon returned to the plastics processing machinery he knows so well, and the Athena concept was born in 2008. "When I started, I set some very precise goals," he says of Athena. "I would either accomplish them or give up.""The main idea is to build a simple, cost-effective platform with energy consumption similar to all-electric injection molding machines. It can now be automated with the features needed all built into the machine. It's simple to install, and can be customized very quickly and cost effectively," Schad says.The Athena line utilizes servomotors in a hybrid platform to achieve repeatability and accuracy "as good as or better" than all-electrics while maintaining low energy consumption in part due to the active power supply that regenerates braking energy. The machines have a small footprint with large daylight and are quiet, operating at under 70 dB.The Athena machines will range from 150 to 500 tonnes, with screw diameters of 30-120 mm. A clean-slate, and cleanroom-ready design philosophy are at the heart of the Athena approach. The machines are built on a one-piece base and feature distributed controls interconnected by a PowerLink bus. All machines feature 150 mm of floor clearance for easy cleaning. All service connections (water, air, vacuum, electrical) are located at the injection end of the machine. Services are pre-routed through the machine base. Also standard are two-platen electric clamps with non-lubricated tiebars and a closed loop, leak-free oil return system for hydraulic components.A wide range of options include a fully integrated high-speed, side-entry robot, stack-mold carrier, integrated dual injection, and integrated hot runner and robot control, meaning the machines can quickly be adapted for in-mold assembly and rotary cube automation. Athena is partnering with SIPA in its PET solutions ("Athena for SIPA"), offering PET preform systems up to 96 cavities. PET systems are sold and serviced by SIPA under the XFORM brand. Athena will be on SIPA's stand at the upcoming DrinkTec and K shows. "The program is very beneficial to a lot of people," says Schad.Athena currently occupies a 40,000-sq-ft facility that houses R&D, labs and assembly, with plans for a 150,000-sq-ft building sometime in 2015. The company currently has 58 employees."Now we have a nucleus that we can introduce," says Schad, "one platform for many different applications, including medical, closures, and preforms all on one platform. There are many excellent machines in the market, which are overkill. We've scaled it down to basics and added pre-engineered options to roll it out to different markets."When asked what he envisions for the new company, Schad says: "Let's assume we win. I'd like to see a private company that my family is holding together with the employees." As always, Robert Schad knows exactly what he wants.

Editor in chief of PlasticsToday since 2015, Norbert Sparrow has more than 30 years of editorial experience in business-to-business media. He studied journalism at the Centre Universitaire d'Etudes du Journalisme in Strasbourg, France, where he earned a master's degree.

Founded in 1967, Schnipke has established a reputation for building tools in-house and designing and engineering molds that meet the medical device industry's stringent requirements for precision at extremely tight tolerances, said the news release. The company claims on its website that it can mold within tolerances of +/-0.001 inches and as small as 0.02 grams in weight. Even smaller dimensions can be accommodated upon customer request.

Plastics injection molder Atalys LLC announced yesterday that it has acquired Schnipke Engraving Co. LLC. Both companies provide injection molding and related services to medical device OEMs. Atalys, based in Rochester, NY, said the acquisition will enhance its manufacturing capabilities, technology, and geographical footprint.

In February, Atalys announced that it is tripling the size of its existing facility in the Dominican Republic from 15,000 to 47,000 square feet through the addition of a new 32,000-square-foot building. The company said that the new building will be dedicated to manual assembly with complementary injection molding, pad printing, tool repair, and warehousing. The existing facility will become the company's primary plastics processing site focused on cleanroom injection molding as well as secondary operations such as testing and packaging.

"Our acquisition of Schnipke was driven by a focused strategy to deepen our capabilities, capacity, and technical superiority across the entire manufacturing process for medical device components,” said Vinc Ellerbrock, president and CEO of Atalys. “The addition of Schnipke adds two manufacturing sites for scalable growth, broadens our geographic presence and reach, enables us to serve a wider array of customers, and significantly augments our technical capabilities,” said Ellerbrock.

"I don't like to build what people want; I like to build what they need," Robert Schad told PlasticsToday upon the public debut of his new hybrid molding machine company, Athena Automation (Toronto, ON), at an open house coinciding with the recent Plast-Ex 2013 show (May 14-16; Toronto, ON).

"I don't like to build what people want; I like to build what they need," Robert Schad told PlasticsToday upon the public debut of his new hybrid molding machine company, Athena Automation (Toronto, ON), at an open house coinciding with the recent Plast-Ex 2013 show (May 14-16; Toronto, ON).Most anyone in the plastics processing industry will recognize the name of the iconoclastic founder of Husky Injection Molding Systems, which the German-born Schad built into one of plastics' most dominant injection molding machine makers, especially in the PET preform and closures market. If Schad sounds a bit like Apple's Steve Jobs he has good reason. The visionary, no-nonsense leader recognized the virtues of vertical integration early on, meaning Husky not only made injection molding machines, but also molds, hot runners, robots, and auxiliaries.

Schnipke has tooling and plastic injection molding operations at its headquarters in Ottoville, OH, and operates a second manufacturing facility in Tucson, AZ. The company is FDA registered and is certified to ISO 13485:2016.

Earlier this week, another medical injection molder made news when Total Molding Services announced that it has been acquired by Haartz Family Holdings, changing its name to Moldgenix in the process.