Manufacturing Sensitive Products in the USA - plastic injection molding products

As Prism wins more programs, keeping manufacturing on American soil, the result is more high-tech jobs for skilled American workers.

A man was crushed to death in a tragic industrial accident when a manufacturing mold weighing upwards of 25,000 pounds fell on top of him while he was at work.

When police arrived along with the Bruce Township Fire Department, they discovered Romeo Rim employee David Spano, 42, deceased after a 12-and-a-half ton manufacturing mold had fallen on top of him off of one of the interior plant walls.

Currently, Prism operates four molding facilities: In addition to the plant at its Chesterfield headquarters, the company has a molding footprint in Port Huron, MI; Harlingen, TX; and Meadville, PA. Prism serves the automotive and industrial markets with various components including safety parts, connectors and sensors, electronics housings and steering and drivetrain parts.

The Macomb Daily said that earlier this year Romeo RIM reported that it had zero safety violations for a full year and that it was the second one-year milestone free of safety violations in less than three years.

According to their website, Romeo RIM manufactures large product parts for the transportation market, heavy trucks, agriculture, construction and rail cars using custom injection molding and other processes.

Prism recently installed a new molding line with three collaborative robots. One robot hands a part to another robot, which hands it off to a third robot, which performs a final inspection and places the part in a box.

The company’s “Technology First” approach allows it to compete on a global scale and win back jobs from Europe, China and Mexico.

Technology has also brought another benefit to Prism. Because of its rapid growth, the company identified a need for additional warehouse space. While some companies might knock out a wall and add on a brick-and-mortar solution, Prism resolved its problem with technology. “We came up with the Very Narrow Aisle Racking system that greatly reduced the space separating rack units,” Ignatowski explained. “Pallets are placed and retrieved using an automated forklift that follows an embedded wire in the floor. An operator drives the fork lift, but in the aisle they can only go forward and backward. That system allows us to have three inches of clearance on the fork lift in the aisle. We implemented this in Chesterfield and the new acquisition in Pennsylvania, as well.”

The incident occurred on Nov. 10 at approximately 9:55 a.m.at Romeo RIM in Bruce Township, Michigan, when the Macomb County Sheriff’s Office received a report that an employee had been injured by a piece of equipment at the plant, the Sherriff's Office said in a statement.

Ignatowski told of a recent high-level meeting with a customer in Prism’s Texas plant. The customer told Prism that it was “one of the best suppliers but that it wanted to put as much business in Mexico, as possible.” They wanted us to site a plant in Mexico, said Ignatowski. “I told them we’ll do that, but we’ll have to add cost to the components because we have no labor content at the Texas plant, which means we won’t realize any labor savings, and the infrastructure costs are higher in Mexico. We’re now getting a significant amount of business from the customer as it localizes its requirements in Texas, and we’re shipping parts to its plant in Mexico. We’re able to do that because of our automation and subsequent quality record. It comes down to the right jobs for the right work.

The “Technology First” mindset has been a constant at Prism Plastics (Chesterfield, MI ) since the day the custom injection molding company was founded in 1999. “That was a time when molders were plentiful,” said Jeff Ignatowski, Director of Marketing, during a phone interview with PlasticsToday. “We decided then that we’d use technology. We chose the highest technology available in molding machines and robotics. We then standardized equipment: By blending automation and the human element, we have become efficient and cost effective. That mindset exists across the board, so that each of our plants operates exactly the same way.”

As manufacturing became global, Prism relied on its automation technology to remain competitive. Under the Technology First banner, the company has  removed almost all manufacturing labor costs from its cost model. “We’re not showing labor in our cost model breakout—that is what technology has done for us,” said Ignatowski.

One advantage of Prism’s operating philosophy is that it has allowed the company to build its human resource requirements around its installed automation technology. Ignatowski explained that while some companies might hire a large number of people at first, then decide to automate and lay off 80% of their work force, Prism deployed automation technology from the get go.

“At this time, the incident appears to be a tragic accident,” said the Macomb County Sheriff’s Department in a statement released following the accident. “The Michigan Occupational Safety and Health Administration has been contacted.”

Those are just two examples of how Prism’s Technology First approach solves problems, but the benefits are far reaching. It helps Prism maintain lean operational costs, which allows the company to compete on a global scale and win back jobs back from Europe, China and Mexico.

“We’ve not eliminated jobs and, in fact, automation has increased the number of jobs we have,” said Ignatowski. He acknowledges that the jobs are more technical in nature: “The people who run the plants are called Process Technicians. Robotics do the repetitive tasks while people perform the technical jobs, [but] we have never replaced a person because of the implementation of technology,” stressed Ignatowski.

Until she retired in September 2021, Clare Goldsberry reported on the plastics industry for more than 30 years. In addition to the 10,000+ articles she has written, by her own estimation, she is the author of several books, including The Business of Injection Molding: How to succeed as a custom molder and Purchasing Injection Molds: A buyers guide. Goldsberry is a member of the Plastics Pioneers Association. She reflected on her long career in "Time to Say Good-Bye."

“Because of NAFTA, we’re in great shape and can boast that our components are 100% made in the USA,” Ignatowski added. “We can compete with low-cost countries because of our approach to technology, lean operations and designing in quality throughout the process. In fact, while others are shipping parts from China, we’re shipping products to China.”