"By spend coverage, 42% (of those surveyed) had index-based contracts with automatic adjustments for resin movements, and 58% had annual contracts with no automatic adjustments," Kaufman says. "These annual contracts were primarily firm price contracts, with some open to negotiation. Specific to the automatically adjusted contracts, we asked about the frequency of adjustments, with the most common being quarterly at 50%, semi-annually at 33%, and monthly at 17%."

From the OEM's standpoint, Kaufman recommends awareness of the resin grades used in plastic components by consulting industry publications, such as those put out by IHS, "to understand recent and projected resin prices as well as feedstock/manufacturing costs. The cost information is important because, as market prices are going down, costs to produce resins may be falling even further and more rapidly." This information can then be used to "challenge any outdated information, such as material alternatives, part weights, etc."

"We use breakdowns and cost models in our client engagements and also teach their use in our training curriculum," says Kaufman. "There are several benefits to using this approach from the buyer viewpoint and for suppliers:

Kaufman next answers the question of how the OEM—the buyer of plastic components—can take advantage of lower prices. "Lower resin prices should translate to lower pricing for plastic components," he said. "In most contractual relationships this does not happen automatically. The buyer [of the parts] must initiate action!"

Kaufman answers the question of how buyers of resins (the processors) can take advantage of lower prices, and how you might explain to your customers movement in the price of their parts.

For example, Kaufman explains that there may be some materials that are less expensive or whose prices correlate more with falling oil prices: Polycarbonate prices are not expected to fall in line with oil prices, for instance. While there may be alternative materials to polycarbonate that are in line with oil prices, Kaufman notes that "a big consideration is the timing and cost to approve the alternate material and whether or not the material change would be feasible."

With the price of oil hovering around $30 a barrel, many manufacturers who buy plastic components are wondering why their processor hasn't lowered the part price accordingly.I guess we're used to looking at the price at the gas pump: When the price of oil goes up or down, so does the price at the pump. There is a close correspondence between the two. For plastic materials, things aren't exactly like that. The price of oil does not have a direct correlation with the price of a plastic part.

I guess we're used to looking at the price at the gas pump: When the price of oil goes up or down, so does the price at the pump. There is a close correspondence between the two. For plastic materials, things aren't exactly like that. The price of oil does not have a direct correlation with the price of a plastic part.

So what do you tell customers when they observe that the price of oil and natural gas is fluctuating, be it up or down, as either condition can lead to customers making that call about part pricing. The drop in oil certainly has caused pricing, particularly in commodity resins, to drop, since resins are produced as by-products of oil and natural gas processing.

Logging out of EU Login will log you out of any other services that use your EU Login account. Use the CORDIS log out button to remain logged in on other services.

The global market for nanomaterials (materials which often have specific properties due to their small particle size) is estimated at around 11 million tonnes with a market value of EUR 20 billion and growing. The current direct employment in the nanomaterial sector is estimated at between 300 000 and 400 000 in Europe. Whilst most of the nanomaterial sector is still dominated by materials in use for decades, such as carbon black (used for tyres) or synthetic amorphous silica (used in applications including tyres, toothpaste and food powders), researchers have been in the process of developing many new nanomaterial-related applications, many now ready for commercial use.

According to Matt Kaufman, Lead Consultant for Advanced Purchasing Dynamics (Plymouth, MI), the dramatic drop in the price of oil along with over-supply has created some market dynamics that we've not experienced in a while. Kaufman, who has many years in the resins industry and is familiar with pricing, notes in a white paper he published a year ago that "each feedstock has a different correlation factor to oil that is influenced by supply and demand of the feedstock, manufacturing process and region of the world [where] the product is produced." He emphasizes that "not all plastics start with crude oil as their primary building block."

Permalink: https://cordis.europa.eu/article/id/401228-nanoenhanced-industrial-materials-building-the-next-european-industrial-revolution

The development and integration of advanced nanomaterials is a key ambition for the European Union as it seeks to make European industry more innovative and more competitive. This CORDIS Results Pack showcases 14 EU-funded projects that have all addressed the upscaling of laboratory-proven nano-based technologies for reaching industrial-scale production and application, providing exciting new opportunities for European industrial production.

Finally, Kaufman advises resin buyers (processors) to reassess the type of pricing mechanism used to negotiate for resins. "Consider different price mechanisms such as negotiated market prices, index to resin price, raw material formula price or cost plus, and fixed price/fixed with collar or band," he says. (In collar or band arrangements—the terms are synonymous—both parties first agree on a fixed price but also agree to some level of pricing movement under certain circumstances, such as when the index price of a resin fluctuates. These circumstances are managed by means of a collar or band, which is described in the agreement.)

While all plastics are made from fossil fuels, Kaufman notes that "some are manufactured from natural gas, while others start with crude oil." As the natural gas price began to decline with shale drilling in the United States, "plastics derived from natural gas have most likely already experienced a feedstock price advantage, while the oil-derived resins are just starting to see the effect." Kaufman, who is working on an update to last year's report, says that once molders and their customers "are able to understand a plastic's origin, you can move to predict a feedstock's price trends."

Parts pricing is always a thorny issue, and it has become more so given the low price of oil. As Kaufman explains, it is important to understand the price change frequency of each resin by supplier and family, and question the frequency that should be modified—annually, quarterly or monthly? Next, re-examine the correlation between "buy-side" and "sell-side" resin prices. "If market prices drop in February, your customer may expect an immediate price decrease, even though your supplier contract does not require an adjustment until April or even July," says Kaufman. "This may be an opportune time to re-examine those contracts and synchronize your ‘buy-side' with your ‘sell-side' contracts."

Finally, Advanced Purchasing Dynamics believes that obtaining and using supplier cost breakdown information is fundamental to eliminating cost from the supply chain and arriving at win/win solutions.

it can change the tenor of negotiations from positional (win/lose) to less-stressful, more-collaborative, partnership-based negotiations;

Europe has been at the forefront of this research, and funding through the Horizon 2020 programme aims to bridge the gap between nanomaterial research in the lab and getting innovative technologies onto the market. This is crucial, as nanomaterials look set to help overcome several pressing and urgent societal challenges. These include the need to care for an increasingly ageing population, reducing carbon emissions and fighting climate change, the more efficient use of finite resources and the development of more sustainable methods of transport. But there are still barriers to overcome before European industry can take full advantage of the large-scale commercialisation of innovative, safe and sustainable nanomaterials. The main challenge is to develop seamless integration of materials and processing technologies for using nanomaterials in industrial production. Other challenges include: improving the control and monitoring of the conditions required for the use of nanomaterials in industrial processes; increasing the levels of robustness and repeatability of these processes; and optimising and evaluating the performance and functionality of the production line and the resulting products.

Some processors have contracts with their largest OEM customers, while others have looser arrangements that may involve looking at part pricing every quarter or six months or even annually. Kaufman addresses this issue by giving the results of a survey of OEMs and Tier 1 suppliers taken a year ago, regarding the types of pricing contracts that they had with their plastics suppliers and looking at two key areas: Assessing the impact of the existing supplier contracts on potential savings opportunities and understanding the resin content and cost of plastic parts.

Given that the price of oil has fallen even more since Kaufman's white paper came out last year, PlasticsToday will provide an update of this information within the next month.

Until she retired in September 2021, Clare Goldsberry reported on the plastics industry for more than 30 years. In addition to the 10,000+ articles she has written, by her own estimation, she is the author of several books, including The Business of Injection Molding: How to succeed as a custom molder and Purchasing Injection Molds: A buyers guide. Goldsberry is a member of the Plastics Pioneers Association. She reflected on her long career in "Time to Say Good-Bye."

This is a machine translation provided by the European Commission’s eTranslation service to help you understand this page. Please read the conditions of use.

In this CORDIS Results Pack, we focus on 14 projects that have made clear and distinguished progress towards overcoming these barriers and demonstrating how nano-enhanced advanced materials can be safely, sustainably and competitively launched into the industrial mainstream. One group of featured projects, including the NANOTUN3D and FAST projects, has showcased how nanomaterials can positively contribute to the growing revolution in 3D printing which will be keenly felt in the medical, automotive, space and construction sectors. Several showcased projects are contributing to lead the emerging field of nanomedicine in new and exciting directions. The PEPTICAPS project has pioneered nano-capsules as carriers of medicine able to treat common conditions, such as allergic and irritant dermatitis and sunburn, whilst the NanoPilot project has constructed a pilot plant to produce small batches of polymer-based nanopharmaceuticals. Meanwhile, the NANOFACTURING project has finalised a manufacturing platform for solid core nanopharmaceuticals, including new manufacturing processes and better supply chain coordination for medium- to large-scale production, all with the aim of bringing more targeted and effective nano-based treatments to market. Finally, many of the selected projects have been engaged in scale-up activities that will embed enhanced nanomaterials into a range of traditional industrial sectors. For example, the ProDIA project has successfully demonstrated the feasibility of large volume industrial production processes for hybrid nanoporous materials as finished products, whilst the IZADI-NANO2INDUSTRY project has demonstrated how nanotechnology can improve conventional materials and the manufacturing processes of injection moulding, casting and coating. Finally, the NANOLEAP project has enabled manufacturing SMEs, primarily in the construction sector, to scale-up their nanocomposite production processes, address processing bottlenecks and seek expert advice.

With the price of oil hovering around $30 a barrel, many manufacturers who buy plastic components are wondering why their processor hasn't lowered the part price accordingly.