The $35 million for sterile injectable medicines is a good start, but more reform for drug supply and pricing is needed, experts say.

“The focus of the factories has shown that their operating equipment efficiency has gone up in both of the sites,” Doorenbosch said. “Because if you can do something very well, you will excel in it.”

The new grades use Elix Polymers base polymers: standard ABS, high-heat ABS, ABS/PC or PC/ABS – and because their key properties remain the same, this does not affect existing OEM approvals of Elix grades. Furthermore, as the shrinkage of the materials stays the same, current molds can be used without further need for modifications.

According to Fabian Herter, Industry Manager Automotive at Elix Polymers, with these new grades, significant cost savings are possible: “Until now, in many instances, fabrics or grease had to be added afterwards to reduce squeak and rattle. However, this involves additional costs and manual labor – and therefore is not ideal. Now, thanks to these new Elix grades, we are able to offer a more competitive solution when compared to other resins that are currently available.”

Mr. Herter added: “This new development is the result of our close partnership with leading OEMs. Together, we identified the need to address this issue and we were able to develop tailor-made solutions. This approach is fully in line with our strategy to focus on specialty added-value materials.”

The $35 million for sterile injectable medicines is a good start, but more reform for drug supply and pricing is needed, experts say.

Carclo began executing this plan by modifying its manufacturing operations in the Europe, Middle East and Africa regions, Doorenbosch told analysts. The company invested in two main operational platforms, one in the U.K. and the other in Brno, Czech Republic.

The new grades underwent stick-slip tests at several premium automotive OEMs according to the VDA230-206 standard using testing machines from Ziegler Instruments, with very positive test results: a 10-point scale is used where 10 is the highest risk level. The new Elix grades managed toscore 1 – the lowest risk level. Tests were conducted with different forces (10 N, 40 N) and speeds (1 mm/s and 4 mm/s) at several temperatures.

Typical critical automotive interior parts affected include door handles, seating parts, cup holders, and air vents. The newly developed grades may also be suited for other segments such as E&E, white goods, or consumer goods.

Stephen has been with PlasticsToday and its preceding publications Modern Plastics and Injection Molding since 1992, throughout this time based in the Asia Pacific region, including stints in Japan, Australia, and his current location Singapore. His current beat focuses on automotive. Stephen is an avid folding bicycle rider, often taking his bike on overseas business trips, and is a proud dachshund owner.

Moving forward, Carclo will focus on other diagnostic test markets not related to COVID-19, CFO Eric Hutchinson told analysts.

Carclo has been implementing changes in response to several operational challenges, including reduced customer demand, high inflation, rising energy costs and ongoing supply chain issues, Doorenbosch said.

One of the most popular hot sauce makers in the U.S. has stopped its production again citing difficulty in sourcing and labor.

Cost reduction actions include increasing efficiency in machine utilization, streamlining plant layouts and more closely monitoring factory expenses.

Due to the plan’s initial success in Europe, Carclo executives made the decision to restructure its U.S. operations the same way, Doorenbosch told analysts.

Other COVID-19 test makers have also had to pivot as sales decline. Medical device conglomerate Danaher’s 4-in-1 test for COVID-19, flu A, flu B and RSV helped the company beat its COVID-19 test sales slump in Q2 last year.

Elix Polymers (Tarragona, Spain) has developed a range of specialty grades of acrylonitrile-styrene-butadiene (ABS) and polycarbonate (PC)/ABS to reduce the squeak that is generated when plastic parts come into contact with other plastic parts, leather, PVC foil, or other products. These undesirable noises can negatively affect the driver’s comfort and the car’s quality impression.

Part of the plan included shuttering Carclo’s injection molding facility in Derry, New Hampshire last year, Doorenbosch added. The company also plans to establish process and technical training centers in the EMEA, U.S. and Asia-Pacific regions “to drive continuous improvement through a very inclusive business approach.”

One of the most popular hot sauce makers in the U.S. has stopped its production again citing difficulty in sourcing and labor.