Micro molds are utilized for various medical processes. Few of the medical molds include surgical devices, endoscopic devices, catheters, hearing aids, point of care testing devices, diabetes management devices, DNA research and sequencing devices, electronic components for medical devices, microfluidics, and pharmaceutical applications, including drug delivery devices, vials, caps, specimen cups, blood collection tubes, syringes, and IV parts. The shifting trend towards miniaturization and nanotechnology in the medical sector is fueling the demand for compatible micro-molds for every medical application.

Venture Plastics has added a 950-ton Nissei FVX 860 hybrid injection molding machine to its El Paso, TX plant in support of the power back-up industry. The Nissei machine, which uses the "X-pump" system with servodrives to cut energy use by up to 45% over a standard hydraulic machine, will be Venture's largest, eclipsing a previously installed 725-ton press.

The global Age-related Macular Degeneration drugs market is set to grow from USD 10.46 billion in 2024 to USD 17.37 billion by 2029, reflecting a...

Between the Texas and Ohio facilities, Venture Plastics' range of injection molding machines goes from 55 to 950 tons. Markets served by Venture include industrial/consumer, major appliance, truck/agriculture, automotive, fuel delivery, and communications. The company provides engineering and design support and project management, injection and structural foam molding, over-molding, insert molding, gas-assist molding, decorating, plating, assembly, and welding.

The key players profiled in the Micro Injection Molded Plastic Market report include Accumold LLC (US), Isometric Micro Molding, Inc. (US), Makuta Micro Molding (US), Precimold Inc. (Canada), MTD Micro Molding (US), Microsystems Precision Medical Moulds (UK), Veejay Plastics Injection Molding Company (US), Knightsbridge Plastics Inc.(California), Polymermedics Ltd. (UK), Manner Solutions For Plastics (Germany), Microdyne Plastics, Inc. (US), SMC Ltd. (US), Mikrotech (US), Sovrin Plastics (UK), Stack Plastics (US), American Precision Product(US), D&M Plastics, LLC (US), Paragon Medical (US), Micro Molding Inc. (US), Spectrum Plastics Group, Inc. (US), Matrix Plastic Products (US), Yomura Technologies Inc (Taiwan), and Barnet Intelligent Materials (US).

Contact Mr. Aashish MehraMarketsandMarkets™ INC.630 Dundee RoadSuite 430Northbrook, IL 60062USA: 1-888-600-6441Email: sales@marketsandmarkets.com   Visit Our Website: https://www.marketsandmarkets.com/   Content Source: https://www.marketsandmarkets.com/PressReleases/micro-injection-molded-plastic.asp  Research Insight: https://www.marketsandmarkets.com/ResearchInsight/micro-injection-molded-plastic-market.asp

This is Venture's first "hybrid" injection molding machine, but perhaps not its last with Osborne noting that electricity is one of Venture's largest costs.

"PC is estimated to be the fastest-growing material type in the Micro Injection Molded Plastic Market between 2021 and 2026."

Southwest Venture Plastics, which covers 48,000 sq ft, was established in El Paso, TX in 2006, joining Venture's 45,000-sq-ft Newton Falls, OH plant. Venture opened the El Paso site to meet product, cost and freight-related needs of major customers. The plant now has 15 injection molding machines total and headcount in 2013 has been increased by 10%, Bryon Osborne, Venture's VP of sales and marketing told PlasticsToday.Venture Plastics Nissei FVX injection molding machine

MarketsandMarkets's flagship competitive intelligence and market research platform, "Knowledge Store" connects over 200,000 markets and entire value chains for deeper understanding of the unmet insights along with market sizing and forecasts of niche markets.

Medical is the largest application for micro injection molded plastic. In the micro injection molding industry, medical micro molding is a highly specialized sector. As medical equipment gets more miniaturized, they rely on micro injection molded components to provide crucial patient care both within and outside the body.

The global anti-drone market was valued at USD 2.16 billion in 2024 and is projected to reach USD 7.05 billion by 2029; it is expected to register a...

MarketsandMarkets™ provides quantified B2B research on 30,000 high growth niche opportunities/threats which will impact 70% to 80% of worldwide companies' revenues. Currently servicing 7500 customers worldwide including 80% of global Fortune 1000 companies as clients. Almost 75,000 top officers across eight industries worldwide approach MarketsandMarkets™ for their painpoints around revenues decisions.

Micro Injection Molding Machine Market by Type (0-10 tons, 10-30 tons and 30-40 tons), Application (Medical, Automotive, Fiber Optics, Electronics), and Region (APAC, North America, Europe, MEA, South America) - Global Forecast to 2026 https://www.marketsandmarkets.com/Market-Reports/micro-injection-molding-machine-market-245710637.html

According to Institute of Industrial Technology and Automation (ITIA-CNR), Micro-components are often smaller than a single grain of granulate. Micro injection molded plastic components are of shot weights of 1 to 0.1 g with tolerances in the range of 10 to 100 microns. This molding process allows manufacturers to produce complicated small geometries with maximum possible accuracy and precision.

CHICAGO, Feb. 3, 2022 /PRNewswire/ -- According to the new market research report "Micro Injection Molded Plastic Market by Material Type (Liquid-Crystal Polymer (LCP), Polyether Ether Ketone (PEEK), Polycarbonate (PC), Polyethylene (PE), Polyoxymethylene (POM)), Application and Region - Global Forecast to 2026" published by MarketsandMarkets, the Micro Injection Molded Plastic Market is projected to reach USD 1,692 million by 2026, at a CAGR of 11.2% from USD 995 million in 2021. Micro injection molded plastics are made of micro injection molding technique which is a highly specialized manufacturing process that produces extremely small, high-precision thermoplastic components with micron tolerances, which can be used in various industries such as medical, automotive, electronics and others.

Our 850 fulltime analyst and SMEs at MarketsandMarkets™ are tracking global high growth markets following the "Growth Engagement Model – GEM". The GEM aims at proactive collaboration with the clients to identify new opportunities, identify most important customers, write "Attack, avoid and defend" strategies, identify sources of incremental revenues for both the company and its competitors. MarketsandMarkets™ now coming up with 1,500 MicroQuadrants (Positioning top players across leaders, emerging companies, innovators, strategic players) annually in high growth emerging segments. MarketsandMarkets™ is determined to benefit more than 10,000 companies this year for their revenue planning and help them take their innovations/disruptions early to the market by providing them research ahead of the curve.

Venture Plastics has added a 950-ton Nissei FVX 860 hybrid injection molding machine to its El Paso, TX plant in support of the power back-up industry. The Nissei machine, which uses the "X-pump" system with servodrives to cut energy use by up to 45% over a standard hydraulic machine, will be Venture's largest, eclipsing a previously installed 725-ton press.

View detailed Table of Content here - https://www.marketsandmarkets.com/Market-Reports/micro-injection-molded-plastic-market-81256553.html

Osborne said the machine will be used in part to manufacture battery jars and PVC lids with lead inserts for its power supply customers.

Europe is the second-largest consumer of micro injection molded plastic, in 2020. Germany, France, the UK are key countries considered in the European region. Increased consumer spending and exports drive the region's economy. Europe has a well-developed automotive sector. It is one of the largest producers of commercial vehicles and has a strong spare parts industry as well. It offers an ideal logistics platform for companies to export to international markets. Europe is an important market for Japanese and US car manufacturers looking to strengthen their position in Europe. Macroeconomic factors such as the recovery of the economy, rising domestic demand, and increase in consumer spending and exports are expected to drive the economic growth of Europe.

In 2020, the PC accounted for the largest market share in material type segment and is also projected to a moderate growth during the forecast period. The market growth is expected to be fueled by the increasing usage of modern medical devices, micro components for the electric vehicles and various components for electronics industry.

"The batteries, electronics and fully integrated power systems provide back-up battery power in the event of a primary power loss or interruption," Osborne said. "Our customers meet the needs in the telecommunications, uninterruptible power supply (UPS) and utility, switchgear and control, cable, broadband, and solar markets."